Doppler ultrasonic flow meter receives CE certification

Sponsored by

RACINE, WI, July 20, 2007 -- A technological leader in the development and production of ultrasonic flow meters for the past 30 years, Dynasonics, a division of Racine Federated Inc., has developed a generation of Doppler ultrasonic flow meters with CE Certification that will expand its purpose into the European market. The CE Certification proves installation and operation on the new DFX is safe and simple.

Contrasting to antiquated Doppler ultrasonic meters, the DFX contains a digital mixer circuit that is highly immune to measurement errors caused by electrical noise and other ultrasonic products ensuring stable and reliable measurements. Intelligent software algorithms operating within the Series DFX Flow Meter, ensures reliable readings by making automatic adjustments to nullify changing liquid conditions. The result is a product that can be taken out of the shipping box and accurately measure flow in minutes without special tools, training or specialized computer software.

The Series DFX is built on the framework of the highly successful Dynasonics Series TFX transit time ultrasonic flow meter. Features common to the TFX and DFX system include: NEMA 4X [IP66] enclosure, field replaceable isolated output modules, large character backlit LCD, auto-ranging rate display and impedance matched ultrasonic transducer connections. The clamp-on pipe transducer is rated to NEMA 6P [IP68], temperatures up to 400°F [200°C] and can be located up to 1,000 feet from the DFX display enclosure. An insertion probe transducer is available for installation on pipe systems that do not permit ultrasound penetration. The DFX system can measure flow on pipe sizes larger than 1/4 inch [6 mm] and flow rates from 0.15 to greater than 30 FPS [0.05 to 9+ MPS].

DFX is a cost effective, non-intrusive solution to measuring flow in full pipes carrying liquids with useful sonic reflectors (particles greater than 35 micron) such as sludges, slurries, emulsions, dispersions and pulps. These categories encompass a wide variety of industrial, chemical, wastewater and food processing applications.

###

Sponsored by

Did You Like this Article? Get All the Water Industry News Delivered to Your Inbox or Mailbox

Subscribe to one of our magazines or email newsletters today at no cost and receive the latest information.

TODAY'S HEADLINES

Research reveals filtration favored over disinfection when treating ballast water

When treating ships' ballast water, new research conducted by the Analytical BioGeoChemistry research unit at the Helmholtz Zentrum München in Germany shows that filtration -- rather than disinfection -- can potentially serve as a more efficient method.

Kruger to provide advanced filtration system for FL reclaimed water project

Kruger was recently awarded a contract to furnish a Hydrotech Discfilter system for the Port Orange Reclaimed Water Reservoir and Filtration Project, located in Port Orange, Fla. 

Self-assembling, biomimetic membranes may lead to better water treatment, analysis finds

According to an international team of researchers from a wide range of universities, businesses and organizations, a synthetic membrane that self assembles and is easily produced may lead to better water purification.

NASA study shows CA’s 'rain debt' equal to average full year of precipitation

According to a new study conducted by NASA, the state of California accumulated a debt of about 20 inches of precipitation between 2012 and 2015 -- the average amount expected to fall in the state in a single year. 

FOLLOW US ON SOCIAL MEDIA

  

 


© 2015. PennWell Corporation. All Rights Reserved. PRIVACY POLICY | TERMS AND CONDITIONS