Berson UV disinfection technology saves money for Cambridge Water

Sponsored by

LONDON, UK, June 8, 2009 -- Cambridge Water plc in the United Kingdom has recently installed three Berson InLine+ DVGW*-validated medium pressure UV disinfection units at its remote Euston Pumping Station. Between them the three units treat up to 724m³/hour of water, which is then delivered via a 55km delivery main to storage reservoirs that serve the city of Cambridge.

Three Berson InLine+ UV disinfection chambers installed at Cambridge Water's Euston Pumping Station. The units are controlled by a UV-Tronic+ V5 PLC controller.
An important feature of the Berson UV technology provided to Cambridge Water is its UV-Tronic+ V5 PLC controller, the latest version of Berson's UV-Tronic controller range. Based on a rugged industrial PLC and with an RS485-based ModBus interface, the UV-Tronic+ V5 links to the site's SCADA control system and allows users to set up and manage the UV system's operating parameters to exactly match their requirements.

Older versions of the UV-Tronic already had the capacity to control multiple streams and treatment chambers, a feature that is particularly useful where a treatment plant has variable water parameters such as flow or transmittance, as it allows shutdown of individual UV chambers when not required, reducing power consumption.

The new UV-Tronic+ V5 has enhanced features which makes it possible to individually control the power level of up to six chambers simultaneously to suit the flow conditions for each stream, further minimizing power consumption. Additional new features include greatly extended monitoring and control via Modbus, increased manual control functionality to ease maintenance and servicing, and the capacity to individually calibrate UV sensors when running in DVGW mode. A built-in modem can also be used to provide remote monitoring and diagnosis and for software upgrades.

In addition, when UV monitors on the inner wall of the UV chamber register a fall in the UV level, the controller is designed to trigger automatic wipers on the quartz sleeves protecting the UV lamps. The wipers remove any built-up deposits on the sleeves, ensuring uninterrupted protection against microbial contamination. An additional benefit of automated wiping means no chemicals are required for cleaning, an especially important feature when it comes to drinking water disinfection.

"The UV-Tronic+ V5 is a very useful feature of the Berson UV system," commented Bob Clifforde, Cambridge Water's Electrical Engineer. "By allowing us to control each UV chamber individually it not only greatly simplifies operations but has also reduced our operating costs."

Providing primary disinfection followed by marginal chlorination using hypochlorite, the UV system was installed as an alternative to chlorine-only disinfection. "We selected UV for this remote location as it is so much more convenient than transporting chlorine from our Cambridge depot, over 50km away. There are savings too over the cost of buying and transporting the chlorine gas," added Bob.

Berson UV is one of the few non-German UV system suppliers capable of providing a complete range of UV systems with capacities between 10 -- 10,000 m³/hour, certified to the newest German DVGW norm, W294, Part 1, 2 & 3 -- the highest standard currently possible in the world. The systems are also fully validated in accordance with the USEPA UV Disinfection Guidance Manual (UVDGM), which certifies the use of the systems for the Long Term 2 Enhanced Surface Water Treatment Rule (LT2ESWTR) released by EPA in November 2006.

Based in the Netherlands, Berson is a world leader in closed-vessel, medium pressure UV disinfection technology for drinking water and wastewater applications, with installations across the globe, from the USA to Australia. Along with fellow UV companies Hanovia Limited in the UK and Aquionics Inc in the USA, Berson is part of the Fluid Technology Division of Halma p.l.c.


* DVGW (German Technical and Scientific Association for Gas and Water) is the body responsible for industry self-regulation in the German water and gas and water supply industry and its technical rules are the basis for safety and reliability.

###

Sponsored by

TODAY'S HEADLINES

IWW Adopts Executive Advisory Committee

As an editor, you hear mixed messages about an editorial advisory committee.

Kurita to acquire valuable ICL business units in asset purchase agreement

Kurita Water Industries and ICL have entered into an asset purchase agreement to allow Kurita to acquire ICL's Performance Products' aluminum, paper chemical and water treatment business units based in Ludwigshafen and Dusseldorf, Germany, as well as in Europe and China.

USDA announces $352M in funding to rehabilitate U.S. rural water systems

The USDA has announced that it is providing more than $352 million in loans and grants to rehabilitate rural water and wastewater systems nationwide as well as make infrastructure improvements in rural villages across the state of Alaska.

Thousands supporting clean water submit comments to EPA, USCE over 'Waters of the U.S.' definition

More than 700,000 Americans have written to support a plan to protect streams and wetlands nationwide that are vulnerable to pollution, and on a coalition of conservation organizations and clean water advocates have delivered their comments to the EPA and Army Corps of Engineers.

FOLLOW US ON SOCIAL MEDIA