Ultrafiltration, ultrasound set to give textile effluents a thorough clean

Sponsored by

GREIFENBERG, Germany, Nov. 23, 2009 -- As part of the PURIFAST project, the EU commission has provided 2.2 million euros to help fund the development of an innovative and efficient method of treating problematic effluents such as those produced in the textile industry. In addition to the input from Germany -- comprising the ultrafiltration specialists inge watertechnologies and the Rhine-Westphalian Institute of Water Research (IWW Water Centre) -- other partners in the project include GIDA, Next Technology Tecnotessile and the companies LAVO and Tintoria King Colour from Italy, as well as the University of Florence and the French company Polymem.

Ultrafiltration treats water using purely physical means in order to remove suspended solids, particles and bacteria. Textile effluents feature a high degree of contamination, which poses a particular challenge to the ultrafiltration membrane. inge watertechnologies AG has been conducting research as part of the PURIFAST project in order to optimally tailor both its patented Multibore membrane and process control system to the project's requirements. The aspects being addressed include pore size and geometry, membrane hydrophilicity, determining the best flux and the optimum backflush flow rate, deploying cleaning chemicals and minimizing their use, etc.

In order to put the new technique to the test, a facility has been set up in the textile town of Prato in Tuscany to treat the municipal wastewater, which is heavily contaminated by the textile industry. This test project involved the simultaneous installation of three, independently controlled membrane lines to enable the optimum adjustments to be identified as quickly as possible. The acid test comes next year with the installation of the process at the textile dyeing facilities of the Italian company Tintoria King Colour.

Peter Berg, Chief Technology Officer of inge watertechnologies AG, explains further: "If we succeed in cleaning up textile effluents at a reasonable cost using ultrafiltration and ultrasound, this should lead to a boom in the recycling of industrial effluents. The treatment of organic substances such as dyes in ultrafiltered water is currently tackled by reverse osmosis. However, this is an expensive method, especially when you consider the amount of energy it requires. If ultrafiltration and ultrasound can provide a better return on investment, then nothing will stand in the way of deploying this new system on a global scale."

More on textile effluents
Water is used in a variety of ways by the manufacturing industries: for cleaning, heating and cooling, as a solvent or even as part of the product itself (e.g. in the beverage industry). Overall, the manufacturing industries use approximately 32 percent of the fresh water in Europe. The sectors with the highest water consumption are the chemical textiles and paper industries and the steel industry.

In the textiles industry, large quantities of water are used in the various production processes, and it is also used to clean up machinery (e.g. rinsing out dye residues). For example, a bleach works requires 50m" to 100m" of water per ton of product, while a dye works uses between 20m" and 50m." This water ends up as effluent, and the residue of dyes and certain chemicals it contains is unavoidable. Most of the substances are of an organic nature.

More information about PURIFAST is available at http://purifast.tecnotex.it/.

About inge watertechnologies AG
The company inge watertechnologies AG, based in the town of Greifenberg near Munich in Bavaria, Germany, employs more than 80 staff and is the world's leading provider of ultrafiltration technology, a membrane process used to treat drinking water, process water, wastewater and sea water.

###

Sponsored by

TODAY'S HEADLINES

Washington DOE approval granted to HaloSource for hybrid water treatment technology

HaloSource recently announced that it has received the Washington State Department of Ecology's General Use Level Designation for its BHR-P50 hybrid polymer used in conjunction with Chitosan Enhanced Sand Filtration system.

Case Study: Filter reduces flood-induced suspended solids in New Orleans heat exchangers

In New Orleans, fooding from Hurricane Katrina led to an in­crease in TSS, which caused fouling of the heat exchangers, resulting in a loss in efficiency and increase in maintenance costs. As such, Vortisand cross-flow microsand filter provided submicron filtration and high-quality water.

Tanks and Water Storage

US based manufacturer Fibrelite has seen a tremendous increase in inquiries for their lightweight composite access covers ...

Meeting Abu Dhabi's High Water Demands

Spurred on by a buoyant economy and population growth, the GCC countries are looking to invest $130 billion over the next decade to meet future demand and introduce new measures to achieve long-term sustainable water and energy supplies.

FOLLOW US ON SOCIAL MEDIA