EPA extends stormwater construction general permit by one year

Sponsored by

WASHINGTON, DC, Jan. 27, 2010 -- The U.S. Environmental Protection Agency (EPA) is modifying the 2008 stormwater construction general permit, extending the permit by one year to June 30, 2011. The permit applies only where EPA is the permitting authority: Massachusetts, New Hampshire, New Mexico and Idaho, Washington, D.C., most territories and most Indian country lands.

The permit regulates the discharge of stormwater from construction sites that disturb one acre or more of land and from smaller sites that are part of a larger, common plan of development. The permit requires construction site operators to comply with stormwater discharge requirements that are intended to prevent sediment loss, soil erosion and other pollution issues at active construction sites.

The extension of the 2008 construction general permit is needed to allow the agency sufficient time to incorporate the new federal effluent requirements for the construction and development industry, which was announced by EPA on December 1, 2009.

More information on the construction general permit extension: http://cfpub.epa.gov/npdes/stormwater/cgp.cfm

More information on the new federal requirements for the construction and development industry: http://www.epa.gov/guide/construction

View notice in Federal Register: http://edocket.access.gpo.gov/2010/2010-1743.htm

###

Sponsored by

 


TODAY'S HEADLINES

Active treatment system solves tough stormwater challenge at mining operation

An aggregate mine in Coquitlan, British Columbia, produces large amounts of material for the construction industry, particularly sand and gravel.

New literature

BETE Fog Nozzle has released a new tank washing brochure on the spray nozzles used for bottle, drum and tank washing.

New products

GE has announced a new corrosion protection technology specifically designed for refinery boiler and steam condensate systems.

Pipe & related products

Asahi/America's Chem Proline® and Chem Prolok™ piping systems have been certified by NSF to NSF/ANSI Standard 61-G.

© 2013. PennWell Corporation. All Rights Reserved. PRIVACY POLICY | TERMS AND CONDITIONS