Water meters meet current, planned regulatory standards

Sponsored by

 

Legislative Standards
On January 4, 2011, President Obama signed legislation revising the definition for "lead-free" within the SDWA as it pertains to "pipe, pipe fittings, plumbing fittings, and fixtures." Entitled the "Reduction of Lead in Drinking Water Act," it includes changes effective January 4, 2014.

These revisions will require that drinking water system products consist of no more than 0.25 percent weighted average lead content, based on a wetted surface area. Evaluations of Neptune's lead-free bronze water meters according to (NSF/ANSI) Standard 61, Annex G (a standard that will be replaced by NSF/ANSI 372 in October 2013) demonstrate compliance with the requirement.

NSF/ANSI Standard 61 limits the amount of chemical extraction, or "leaching," of metals as part of its performance requirements. Effective July 2012, there will be a reduction of the Total Allowable Concentration (TAC) of leached lead from 15 micrograms per liter to 5 micrograms per liter. This change is drafted as Annex F to NSF/ANSI Standard 61. Neptune's lead-free water meters currently meet the revised performance standard as well.


TALLASSEE, AL, Apr. 8, 2011 -- Neptune announced recently that all its bronze meters, which are made in the U.S., currently meet the future lead-free requirements of the Safe Drinking Water Act as well as planned revisions to NSF/ANSI standards regarding lead in drinking water system components.

While many other meter manufacturers use '81 brass,' a bronze alloy containing seven percent lead, Neptune President Charles C. DiLaura said that the company made a significant investment to switch to lead-free bronze in 2001. "After weighing all the social and environmental benefits, we believed that our decision was prudent," he said, "and the current regulatory environment has validated our position."

Neptune's water meter manufacturing facilities are dedicated to lead-free operations, production, and testing -- the first and only in North America, according to the company.

"As the regulations around lead content in bronze plumbing devices change, our customers can be assured that the bronze body meters they buy from Neptune not only meet the current, but also planned requirements," DiLaura said.

###

Sponsored by

 


TODAY'S HEADLINES

Interior releases updated hydraulic fracturing draft rule for public, Indian lands

The Dept. of the Interior released an updated draft proposal establishing safety standards for hydraulic fracturing on public and Indian lands.

PA American Water marks completion of $101M Pittsburgh water treatment project

Pennsylvania American Water marked the completion of $101M in upgrades to Pittsburgh water treatment plants to improve service and public safety.

GE membrane technology to be installed at largest European drinking water plant

Erope's largest drinking water purification plant to feature GE's ZeeWeed* 500 water treatment technology is under construction in Ravenna, Italy.

Groundwater, soil cleanup begins at CA Superfund site

EPA announced that work will begin this week to address soil and groundwater contamination at the Pacific Pipeline Superfund Site in Fillmore, Calif.

© 2013. PennWell Corporation. All Rights Reserved. PRIVACY POLICY | TERMS AND CONDITIONS