Pennsylvania, November 2012 -- Croydon, PA continues to supply specialty precast concrete pipe for the Milnor Street spur ramp’s stormwater drainage system which is a portion of Pennsylvania Department of Transportation’s (PennDot) $30 million-plus I-95 Revive project. The I-95 Revive project is a long-term, multi-phase infrastructure initiative to improve and rebuild the 51 miles of I-95 in Pennsylvania to meet the future transportation needs of the region and state.
A portion of the I-95 Revive project involves the widening and rebuilding of the existing northbound on-ramp to include a spur ramp from Milnor Street. The spur ramp is designed to reduce the volume of commercial traffic on State Road and other roads on the west side of I-95 by accommodating the heavy vehicles that serve businesses between I-95 and the river. In addition, improvements are being made to the Milnor Street spur ramp’s stormwater drainage system.
Oldcastle Precast, contracted by Tony DePaul & Son, supplied custom engineered elliptical precast concrete pipe for the Milnor Street spur storm water drainage system. The use of heavy wall, 34 “ x 53” Type A/SH Shore Trench Box 30’- 1.5 ‘ Fill Design pipe meets the challenge posed by the 30 feet of fill required at the ramp. With deep fills necessary in the ramp area, the precast concrete pipe had to be engineered to handle the weight load of 30 feet of fill compacted over the concrete pipe. The pipe had an outside diameter of 55-inches x 80-inches with an approximate weight of 20,000 lbs. each. The specialty precast concrete pipe is produced with a special concrete mix and added reinforcement to increase the strength and long-term performance for Penn-DOT.
In a 2012 press release by the American Concrete Pipe Association concrete pipe was rated best among all pipe products:
“Among specifiers, DOT/public agency officials and consultants, concrete pipe was rated best among all pipe products on several key criteria, including most durable (87.3 percent), easiest to design or specify (62.1 percent), least flammable (84.1 percent), least installation inspection required (54.5 percent), least installation sensitive (62.1percent) and “greenest” (34.1 percent).”
About Oldcastle Precast.:
Oldcastle Precast, Inc is the leading manufacturer of precast and polymer concrete products in the U.S. Providing engineered product solutions nationwide to a number of market sectors including building structures, communications, government/military, power and energy, security, transportation, water, construction services, engineering support and LEED/green consulting.