Direct mount wafer-cone flow meter

Sponsored by
Direct mount wafer-cone flow meter  

McCrometer said its Wafer-Cone® Flow Meter's new direct mount configuration minimizes installation labor while ensuring accuracy. Direct mounting the transmitter is said to eliminate impulse lines, which is designed to reduce potential leak points by more than 50%.

The meter is ideal for gas or liquid service in line sizes from 1 to 6 inches. The meter's flangeless design makes installation fast and easy, while the interchangeable cone offers flexibility to accommodate changing flow conditions without the need for recalibration. When flow conditions change over time, the cone can be removed and replaced with a cone at a different beta ratio eliminating the need to buy a new meter.

With no moving parts the manufacturer said its well suited for the following applications: natural gas wellheads, CO2 and water injection, gas lift, compressor anti-surge, fuel gas, separator discharge, biogas reactors, cooling systems, plant HVAC, process gas lines and more.

The Wafer-Cone Flow Meter's differential pressure sensing technology with built-in flow conditioning is said to greatly reduce the required straight pipe run for installation as compared with technologies such as orifice plates and venturi meters.
www.mccrometer.com

Sponsored by

TODAY'S HEADLINES

VIDEO: Desalination global news round-up

Join WWi Chief Editor Tom Freyberg for a round-up of the latest desalination industry news from the last two weeks. Watch the video for the full stories…

Maryland WWTP's new solar array to serve as state's largest municipally-owned system

Standard Solar is set to install a 2.1-megawatt ground-mount solar system in Pocomoke City, Md., at the city's wastewater treatment facility. Once completed this December, it will be the largest municipally-owned system in the state.

Major Texas company to pay $1.6M civil penalty for CWA oil spill violations

The Department of Justice and the EPA have announced that Superior Crude Gathering has agreed to pay a civil penalty for alleged violations of the Clean Water Act stemming from a crude oil spill in 2010 from tanks at the company's oil storage facility in the town of Ingleside, Texas.

Bureau of Reclamation makes WaterSMART grants available to improve water, energy conservation

The Bureau of Reclamation is inviting states, tribes, water and irrigation districts, and other water- and power-related organizations to apply for funding to cost-share on projects that conserve and use water more efficiently, increase renewable energy use and improve energy efficiency.

FOLLOW US ON SOCIAL MEDIA