UV technology ensures low TOC levels in boiler feedwater

July 22, 2008
TOC can cause corrosion in the boiler systems of power plants so its reduction is essential. Most plants set maximum limits for TOC in boiler feedwater, the level depending on the pressure of the boiler -- the lower the pressure, the lower the purity requirements. The majority of organic compounds found naturally in water can be removed by physical processes like ultrafiltration or by ion exchange. Some organic compounds, however, require additional steps for their removal or destruction...

SLOUGH, UK -- Hanovia's medium pressure UV technology has been chosen for TOC (total organic carbon)¹ reduction in boiler feedwater at the newly constructed Kaeng Khoi 2 power plant in Saraburi, Thailand.

TOC can cause corrosion in the boiler systems of power plants so its reduction is essential. Most plants set maximum limits for TOC in boiler feedwater, the level depending on the pressure of the boiler -- the lower the pressure, the lower the purity requirements. The majority of organic compounds found naturally in water can be removed by physical processes like ultrafiltration or by ion exchange. Some organic compounds, however, require additional steps for their removal or destruction.

Hanovia's medium pressure UV systems are specially designed to achieve extremely high degrees of TOC reduction. They achieve this with special UV lamps that break down TOCs and other low level organics in two ways: firstly, by dissociating their molecular bonds; and secondly, by generating aggressive hydroxyl radicals from water molecules, which also break down TOCs.

The Hanovia UV system at Kaeng Khoi 2 is integrated into a demineralization plant supplying water for the boiler feedwater system. Following softening and clarifying pre-treatment, the water passes through fine sand filters and then undergoes reverse osmosis to remove TDS (total dissolved solids) before passing through two Hanovia chambers. Positioned in series, each chamber contains six medium pressure UV lamps. Following UV treatment the water undergoes polishing in a mixing bed prior to use.

The two Hanovia UV chambers treat a combined water flow of up to 400m³. Actual TOC input to the UV chambers is 183ppb and output is 58ppb -- a 68% reduction and well below the required minimum required concentration.

The contractors who supplied the demineralization plant decided to use Hanovia UV technology because of the company's international reputation for reliability and customer service. Other important factors were the low pressure drop through the UV chambers and the system's overall ease of use compared with competitors' equipment.

All Hanovia UV units can be easily integrated into plant control systems. Maintenance requirements are minimal -- typically the UV lamps only need replacing once a year, an easy operation which can be carried out by on-site personnel.

Kaeng Khoi 2 is a gas-fired thermal power plant situated in Saraburi province north of Bangkok. The plant has two combined cycle power generators with an output of 724MW each.

Based in the United Kingdom, Hanovia is a world leader in UV disinfection technology for processing applications.

1. The TOC is a measure of the organically oxidizable content of a sample

###

Sponsored Recommendations

Meet the future of MV switchgear

SureSeT new-generation metal-clad. Smarter. Smaller. Stronger.

A digital circuit breaker built for the future

EvoPacT medium voltage digital vacuum circuit breaker

The New Generation of Intelligent MV Switchgear

Step into the future of electrical infrastructure with Intelligent MV Switchgear - where traditional equipment becomes smart, providing real-time data on critical components like...

Switchgear goes digital with SureSeT

Discover what you can do with Square D natively digital MV metal-clad switchgear.