Injector pumps
Chem-Feed® C-1100E Injectors meter precise amounts of fluid. The precision molded, heavy duty cartridge head provides enhanced priming, and resists airlocks caused by solids forming chemicals like chlorine. The injectors can receive 4-20 mA, 0-10 vDC and pulsed signal inputs. Signal inputs are used to automatically adjust the output of the injector. The pumps offer pressure ratings to 150 psi and outputs to 360 gpd. A new variable speed motor option ensures uninterrupted output, no On/Off cycle and no "downtime."
Blue-White Industries
Huntington Beach, CA
Tel: 714-893-8529
Web: www.bluwhite.com
Dry prime pumps
The Godwin Dri-Prime®, an automatic self-priming centrifugal pumpset available in sizes from 2 in. to 16 in., is designed for use in a variety of applications including sewer bypass, storm water dewatering, and standby back up pumping for pump stations. With maximum flows to 6,000 gpm, heads to 500 ft. and solids handling to 3.75 in. in diameter, the pump is capable of handling sewage, storm water, industrial sludges, oil, and other pumping needs. Godwin provides rental, sales and service of pumps and accessories.
Godwin Pumps
Bridgeport, NJ
Tel: 856-467-3636
Web: www.godwinpumps.com
Horizontal split case pumps
Patterson's Type A Horizontal Split Case Pumps are engineered to move clear water or low viscosity clear liquids at moderate heads. Their simple design contributes to extended service life, reduced maintenance and lower power consumption. Available capacities range from 50 to over 100,000 gpm, with single stage heads to 550 feet and two stage heads to 1150 feet, or in custom sizes. Vertical units are also available.
Patterson Pump Co.
Toccoa, GA
Tel: 706-886-2101
Web: www.pattersonpumps.com
Cantilever pumps
The new Vanton line of thermoplastic vertical centrifugal sump pumps is specifically designed to handle corrosive, hazardous, toxic or ultrapure fluids in those applications where immersed bearings cannot be tolerated. Designated as the SGK series, these fully cantilever shaft pumps are designed to operate in applications where dry running may be necessary for extended periods of time. They are rated for flows to 1000 GPM, at heads to 240 feet and for temperatures to 275ºF, with the upper range determined by the thermoplastics selected. They are available for pump depths to 6 feet and for greater sump depths with tail pipes. All components in contact with the fluid being pumped are available in homogeneous thermoplastics.
Vanton Pump & Equipment Corp.
Hillside, NJ
Tel: 908-688-4216
Web: www.vanton.com
Metering pump
New features expand the capabilities and application of ProMinent's gamma/L low flow series metering pump. The solenoid metering pumps offer calibrated output in gph or lph, analog input, field retrofittable relays, degassing liquid ends, access coding, and field bus connection for remote monitoring and control. New options include high viscosity versions for thick liquids, a 2-week programmable timer (81 events), analog output (4-20 mA), and low voltage connections. The metering pumps also can be integrated into ProMinent's pre-packaged engineered or custom designed systems.
ProMinent Fluid Controls, Inc.
Pittsburgh, PA
Tel: 412-787-2484
Web: www.prominent.cc
Vertical pumps
Pentair Water Treatment offers a line of multistage vertical pumps under the CodeLine brand name. To date the CodeLine name has been associated with the company's line of RO and UF membrane housings used in the production of process water. The new line of stackable stainless steel pumps is ideal for high pressure applications requiring minimal floor space. Available in either 304 or 316 stainless steel construction, the multistage pumps have been designed to handle clean or aggressive liquids at pressures up to 600 psi and temperatures to 250°F.
Pentair Water Treatment – Industrial / Municipal Group
Chardon, OH
Tel: 440-279-2821
Web: www.pentairwater.com
Pump seals
EMU pumps from USFilter's Davis Products feature a new mechanical seal system that minimizes the risk of seal face contamination. Both the upper and lower sets of mechanical seals are inside a precision-engineered Enclosed Block Seal (EBS). Servicing is simplified because each set of seals are "factory set" with correct spring pressure, requiring no field modifications or adjustments. All that's required to replace the EBS is to remove the heat exchanger, replace the EBS, and re-install the heat exchanger. No special spring force tools or other technical field assembly are required to guarantee correct positioning and location within the pump. Springs and housing are all 316 stainless steel.
USFilter's Davis Products
Thomasville, GA
Tel: 800-841-1550
Web: www.usfilter.com
Chemical pumps
Goulds Pumps offers a line of heavy duty, magnetically driven, lined chemical feed process pumps, the 3298 Series. The pumps are available in frame mounted, close-coupled, vertical in-line and self priming configurations. Liquid-end parts are lined with a thick layer of Tefzel® (ETFE) for universal corrosion resistance and an impenetrable barrier against leakage. The pumps meet the strictest EPA regulations under the Clean Air Act and offer zero emissions for a safe system and work environment.
Goulds Pumps, ITT Ind.Pump Group
Seneca Falls, NY
Tel: 315-568-7122
Web: www.fluids.ittind.com
Booster pumps
Flowtronex PSI's MP-Booster is a factory tested, packaged pumping system designed specifically for plant water wash down, irrigation and transfer needs. Standard features include a NEMA 4 enclosed UL 508A listed control panel with main disconnect switch, stainless steel transducers and the Oasis onsite field programmable controller. The system can be equipped with three or four-inch headers and two to three pumps run by a variety of horsepower options to flow up to 225 gpm and pressures of 130 psi.
Flowtronex PSI
Dallas, TX
Tel: 214-357-1320
Web: www.flowtronex.com
Flow conditioner
Process engineers experiencing problems with short runs of piping that cause cavitation and premature failure of pumps and valves will find that the new Vorel 90° Elbow Flow Conditioner isolates flow disturbances, reduces swirl and develops a symmetrical, repeatable flow profile with minimal pressure loss at the inlet to their process equipment. The flow conditioner replaces the last pipe elbow upstream of the pump or valve. It was developed using the same tab-type flow conditioning technology as the straight run Vortab Flow Conditioners, which have been laboratory proven and successfully installed in hundreds of plants worldwide.
FCI/Vortab Co.
San Marcos, CA
Tel: 760-736-6171
Vacuum priming retrofit
Smith & Loveless above grade pump station owners can upgrade their vacuum priming systems to the reduced maintenance system found on the new Formula X™ Wet Well Mounted Pump Station. The parts found in the Vacuum Priming System retrofit kit H87A310 have been specifically designed for both reduced maintenance and enhanced performance. The kit includes installation instructions, a new two-way larger ported solenoid valve, 3/8 inch tubing, vapor filter, and more.
Smith & Loveless, Inc.
Lenexa, KS
Tel: 800-922-9048
Web: www.smithandloveless.com
Open hopper pump
seepex has developed a new type of open hopper pump to transport extremely viscous products and dewatered sludge cake. The pump can transport materials up to three million cPs and wastewater sludge with over 50% solids. The new design uses a feed auger that operates separately from the pump rotor shaft. This allows the auger to operate concentrically and to be driven at a speed that is independent from the pump speed. The design separates the fluid shearing action from the pumping rate. It also reduces bridging inside the pump because the auger cleans the casing walls.
seepex, Inc.
Enon, OH
Tel: 937-864-7150
Web: www.seepex.com
Close coupled pump
Netzsch has released a new four-page brochure on its NEMO® Standard Close Coupled Pump Series. The brochure provides key features of the pumps, engineering principles, dimensional drawings, general output capacities and materials of construction. Because the pumps come complete with a pre-designed drive and baseplate, they can be quickly assembled and delivered. They can handle high-viscosity and shear-sensitive materials, making the pumps ideally suited for industrial applications.
Netzsch Inc.
Exton, PA
Tel: 610-363-8010
Web: www.netzschusa.com
Modular pumps
Pumpex has introduced a new series of modular K pumps. Models K-89, K-103 and K-153 have been designed with an improved cooling system especially for use in a dry pit system. All three models are built on the same size frame and use the same spare parts, improved hydraulics, a choice of impeller types and curves, and FM explosion-proof motors. The newly designed pumps also feature an improved volute design that features four quick release bolts to make a tighter, stronger volute connection with no parts to work loose or to get lost.
Pumpex, Inc.
Lebanon, NJ
Tel: 908-730-7004
Metering pumps
LMI has released new literature on its motor-driven metering pumps, which are designed for applications where required outputs are higher than an electronic pump can render. The brochure explains the benefits of its Series M pumps, which can be used for dosing of acids, chlorinated products, bases, coagulants and other chemicals. They also handle difficult to dispense fluids such as polymers and slurries. The pumps don't require any fluid on the diaphragm's non-process side, so there's no chance of contaminating the process fluid.
Liquid Metronics Inc.
Acton, MA
Tel: 978-263-9800
Web: www.lmipumps.com
Centrifugal pumps
World Chemical's Series GV and GVF self-priming seal-less and valve-less mag-drive corrosion resistant centrifugal pumps are used for continuous duty with wastewater, strong acids, bases and harsh chemicals. These pumps are constructed with polypropylene or ETFE thermoplastics; high purity bushing and shaft materials, carbon, ceramic, PTFE and SiC. They are close coupled to quality TEFC, premium efficiency or explosion-proof motors. The pumps provide suction lifts to 17 feet and a product range of 112 gpm or 100 ft. TDH. They are available in 1 1/2 and two in. NPT and adjustable ANSI flange connections.
Seal-less Solutions L.L.C.
Exton, PA
Tel: 717-626-9694
Metering pumps
The Digital EZB Series metering pumps from Walchem are designed to work with a variety of chemicals and metering applications. These solenoid-driven diaphragm pumps have a maximum capacity of 3.2 gph and a maximum pressure of 150 psi. The pumps combine a 360:1 turndown ratio with high stroking speed and a fixed stroke length design. They pump at 360 strokes per minute. This high speed reduces chemical slug feeding found in slower metering pumps. The digital controller has three pushbuttons for speed adjustment and also provides an IP65 solution for harsh environments. For installations with restricted access, the digital controller can be mounted remote from the pump.
Walchem Corp.
Holliston, MA
Tel: 508-429-1110
Web: www.walchem.com
Vertical pump
Hydra-Cell Industrial Pumps has introduced its D-17 Series industrial pumps. The vertical-mount pumps provide flows to 13.4 gpm and pressure to 2500 psi. They are ideal for direct mounting on top of fluid tanks where space is limited. The positive displacement pumps incorporate a sealless, hydraulically balanced five-diaphragm design. The pumps are self-priming and can run dry without damage. They can be constructed from a range of corrosion resistant materials to meet specific application requirements.
Hydra-Cell Industrial Pumps
Minneapolis, MN
Tel: 612-332-5681
Web: www.hydra-cell.com
Portable dewatering pump
A portable 1.4 hp pump ideal for small-scale dewatering applications has been introduced by ITT Flygt Corp. Designated as the model Ready 12, the pump weighs only 25 pounds and has a diameter of 7 1/4 in. The unit reaches 65 ft. of head and pumps up to 85 gpm. It features a 2 in. NPSM discharge and employs an abrasion resistant thermoplastic polyurethane impeller. A synthetic material body permits it to pump liquids ranging in pH from 3 to 9.
ITT Flygt Corp.
Trumbull, CT
Tel: 203-380-4700
Grinders
The Sewer Chewer® Severe-Duty Grinder is designed for solids size reduction in sewage, sludge and waste handling processes. The twin shaft arrangement and patented cutter design provide good performance with low head-loss. A variety of motor and mounting options are available to configure the units to most any installation. Inline flange mounting, channel mounting or wet-well frame mounting are among the most popular configurations. TEFC gearmotors are standard; Explosion-Proof and Submersible (IP68, FM Listed) are also available. Standard NEMA 4X controllers provide a digital keypad operator interface for user-configurable control and operation.
Yeomans Chicago Corp.
Aurora, IL
Tel: 630-236-5500
Web: www.yccpump.com
Pump service, sales
Flowserve manufacturers and services a complete range of pumps used in water and wastewater applications. In addition to 21 world wide manufacturing centers for new pump requirements, the Pump Division operates 17 Pump Service Centers in North America that provide both field and in-shop repair and reconditioning services. The company's engineers and technicians are qualified to handle projects ranging from basic pump service to comprehensive turnkey jobs.
Flowserve Inc.
Benecia CA
Tel: 800-747-9997
Web: www.flowserve.com
Chemical feed pumps
Magnatex® Pumps offers the new Texel® MTA Series Pumps. They feature an ANSI compatible design combined with a chemically inert PFA lining. Available in three models, the series features a ductile iron, armored design that conforms to ANSI B73.3M hydraulic and dimensional standards. Its sealless, mag-drive design eliminates the need for mechanical seals. The pump's PFA fluoropolymer lining offers superior chemical corrosion resistance. The close-coupled design is engineered for standard C-face motors. The pump offers flow rates to 320 gpm and a 150 psi maximum working pressure.
Magnatex® Pumps Inc.
Houston, TX
Tel: 713-972-8666
Screw pump
The patented JS Twin Screw Pump from Atlas-Stord features a rugged yet simple design which consists of two intermeshed, counter-rotating screws that provide a continuous and non-pulsating flow of sludge. As the screws rotate, the intermeshed flights prevent the product from co-rotating and generate a plugged flow condition, allowing the pump to produce the high discharge pressure required in many sludge-pumping applications. External bearings and an integral timing gear support the ends of the rotating screws, preventing metal-to-metal contact between the screws and pumping chamber liner and enabling virtually unlimited dry-running without wear or overheating.
Atlas-Stord, Inc.
Greensboro, NC
Tel: 336-668-7728
Web: www.atlas-stord.com
Positive displacement pump
Viking Pump has released the AccuLobe™ Pump, a compact positive displacement pump for use in sanitary applications. The pump features a five lobe rotor design with a one-piece rotorcase/gearcase. The five lobe rotors minimize pulsation, while the precise alignment of the rotorcase/gearcase helps maximize repeatability. The pumps are ideal for pumping shear-sensitive or viscous fluids, and for applications where reproducible flow is necessary. Front-loading seals allow for simple maintenance. The pump is self-draining, yet maintains volumetric efficiency through chamfered cusps around the ports.
Viking Pump, a unit of IDEX Corp.
Cedar Falls, IA
Tel: 319-266-1741
Web: www.vikingpump.com
DC drives
Micropump® now offers its MS, EG, HG and 380 brushless DC drives in multiple standard designs or custom configurations to meet the specific performance requirements of OEM applications. These compact units feature built-in speed control and tachometer output that allow for integration into PLC- or PC-controlled machines or end user installations. The integration of these drives maximizes design flexibility, which reduces costs. The company tailors each drive to work with a specified pumping system. By using a drive stator connected directly to the pump, the integrated unit is able to operate the pump electromagnetically with no moving parts and no direct contact with the internal pumping components.
Micropump Inc.
Vancouver, WA
Tel: 360-253-2008
Web: www.micropump.com
Centrifugal pumps
Gorman-Rupp has introduced 8 in. and 10 in. sizes to the Super T Series, line of self-priming centrifugal pumps. The line now delivers up to 3300 gpm, and heads to 130 feet. Based on the respected T Series solids-handling trash pumps, the Super T Series doubles impeller and wearplate life to decrease downtime and keep the pump operating at maximum efficiency. The 8 in. pump offers an external shimless wearplate adjustment for maintenance of the clearance between the impeller and wearplate, which results in increased impeller and wearplate life. The external adjustment is as simple as a turn of the hand, with no need to realign belts, couplings and other drive components.
The Gorman-Rupp Co.
Mansfield, OH
Tel: 419-755-1011
Web: www.gormanrupp.com
Progressing cavity pump
The Moyno® 1000 Progressing Cavity Pump is available in an open throat configuration. Equipped with a large suction hopper, the pump can transfer viscous materials from its auger assembly to the rotor-stator pumping elements. The pump features Moyno's hardened, pin-type universal joints, which are sealed and lubricated. The open throat pump offers flow rates to 325 gpm and pressure capabilities to 225 psi. It passes particles up to 1.1 inches in diameter and handles fluid viscosities up to 1,000,000 cps unassisted.
Moyno Inc., a Div of Robbins & Myers
Springfield, OH
Tel: 877-486-6966
Web: www.moyno.com
