Ion Exchange Recycling Project Approved

Sept. 28, 2000
Minneapolis-St. Paul metal finishing, electroplating and similar operations will take part in a recycling project approved Wednesday by the U.S. Environmental Protection Agency.

MINNEAPOLIS, Sept. 27, 2000, (UPI) — Minneapolis-St. Paul metal finishing, electroplating and similar operations will take part in a recycling project approved Wednesday by the U.S. Environmental Protection Agency.

The U.S. Filter Recovery Systems Project XL technology will use an ion filter to keep metal sludge from finding its way into landfills or the Mississippi River. The filter is an ion exchange canister resin system that will clean the water used in manufacturing processes, allowing the filtered water to be reused by the manufacturer and sending the sludge to a recycling center for recovery.

The EPA will provide the generators and transporters for the waste, temporarily deferring some regulations covering such waste. "The USFRS XL project will provide superior environmental performance by promoting recycling of water and recovery and reuse of metals that would otherwise be land disposed," the EPA said.

"The overall goals of this project are to: encourage conservation of potable water, encourage better metals recovery through waste segregation and use of ion exchange columns, reduce energy and other costs associated with water treatment and reduce cost to generators for record-keeping, manifesting and transportation of (hazardous) waste."

© COPYRIGHT 2000 UPI All Rights Reserved.

Sponsored Recommendations

ArmorBlock 5000: Boost Automation Efficiency

April 25, 2024
Discover the transformative benefits of leveraging a scalable On-Machine I/O to improve flexibility, enhance reliability and streamline operations.

Rising Cyber Threats and the Impact on Risk and Resiliency Operations

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...

State of Smart Manufacturing Report Series

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...

SmartSights WIN-911 Alarm Notification Software Enables Faster Response

March 15, 2024
Alarm notification software enables faster response for customers, keeping production on track