Shopping destination selects CULTEC stormwater system solution

Oct. 6, 2008
In Spring 2008, construction began at Legacy Place, a 675,000 square-foot open-air shopping destination, which will feature a blend of more than 80 of the nation's leading fashion, restaurant and entertainment tenants. Located in Dedham, Mass., Legacy Place will also serve as home to the new world headquarters for property owner National Amusements, a leader in the motion picture exhibition industry and the parent company of Viacom and CBS Corporation...

• National Amusements' shopping destination, Legacy Place, new headquarters employs company's low- and high-profile chambers to accommodate site's varying elevations

BROOKFIELD, CT, Oct. 3, 2008 -- In Spring 2008, construction began at Legacy Place, a 675,000 square-foot open-air shopping destination, which will feature a blend of more than 80 of the nation's leading fashion, restaurant and entertainment tenants. Located in Dedham, Mass., Legacy Place will also serve as home to the new world headquarters for property owner National Amusements, a leader in the motion picture exhibition industry and the parent company of Viacom and CBS Corporation.

Following the state's stormwater regulations, the project engineers at Allen & Major Associates Inc. needed to maintain the site's historic rate of runoff, despite the new development's increased number of impervious surfaces, as well as provide runoff recharge to the groundwater and perform water quality treatment prior to discharge to surface waters. The site presented some additional challenges, including the varying ground elevations in relation to the groundwater level and the insufficient space for the adequate number of above-ground stormwater systems.

To address the varying ground elevations, two types of CULTEC underground stormwater chambers were selected. Typically, a CULTEC system design uses the largest chamber that meets the site's depth constraint, reducing the land and number of chambers required. Instead this project specified the Recharger® 330XL, a large capacity chamber, in order to retain and recharge stormwater in areas where the depth permitted. The project also utilized CULTEC's lower profile Contactor® 125HD heavy duty chambers to accommodate the site's depth-restricted areas. The latter chamber can also be used in applications where a large infiltrative area is required.

The chambers are being installed in four beds, which, upon completion, will occupy 52,467 square feet and provide 74,692 cubic feet of combined storage. Employing underground chambers made it possible to create some additional parking spaces, which will be located above the system, thus helping to address a space constraint issue.

"We were pleased to work with CULTEC, whose systems were previously used by the Town of Dedham," said Brian Jones, Senior Project Engineer with Allen & Major Associates. "The company's chambers are very cost-effective, and CULTEC's staff provided us with shop drawings to assist us in designing the system."

In addition to helping with preliminary calculations and CAD designs, CULTEC conducts pre-construction meetings with contractors to ensure a smooth and trouble-free installation.

Specified for the project, the Recharger 330XL chamber has a storage capacity of 52.2 ft"/unit and features the company's unique internal manifold design that adds flexibility to the system and decreases the required installation footprint. The internal manifold is achieved via two side portals located on each chamber, which allow manifolding to take place at any point within the system, eliminating the need to build external manifolds. The other models of the Recharger series also employ the internal manifold feature. The Contactor chamber series and Recharger 150, however, require a conventional pipe manifold.

CULTEC Inc., headquartered in Brookfield, Connecticut, is a national manufacturer of plastic chambers used in subsurface retention/detention stormwater management systems and septic applications.

###

Sponsored Recommendations

ArmorBlock 5000: Boost Automation Efficiency

April 25, 2024
Discover the transformative benefits of leveraging a scalable On-Machine I/O to improve flexibility, enhance reliability and streamline operations.

Rising Cyber Threats and the Impact on Risk and Resiliency Operations

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...

State of Smart Manufacturing Report Series

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...

SmartSights WIN-911 Alarm Notification Software Enables Faster Response

March 15, 2024
Alarm notification software enables faster response for customers, keeping production on track