Sandia to demonstrate arsenic, radium removal techniques at Navajo Reservation

Aug. 14, 2006
Sandia National Laboratories will demonstrate two methods of removing arsenic and radium from drinking water at the Pine Hill School Public Water System on the Navajo Nation (Ramah Navajo Reservation) over the next several months. The project is the fifth arsenic removal demonstration site that Sandia has established as part of a consortium made up of Sandia, the AWWA Research Foundation (AwwaRF), and WERC, a consortium for Environmental Education and Technology Development.

ALBUQUERQUE, NM, Aug. 14, 2006 -- Sandia National Laboratories will demonstrate two methods of removing arsenic and radium from drinking water at the Pine Hill School Public Water System on the Navajo Nation (Ramah Navajo Reservation) over the next several months.

The project is the fifth arsenic removal demonstration site that Sandia has established as part of a consortium made up of Sandia, the AWWA Research Foundation (AwwaRF), and WERC, a consortium for Environmental Education and Technology Development.

U.S. Sen. Pete Domenici, R-N.M., secured funding for the arsenic removal test project through the U.S. Department of Energy (DOE) as chairman of the Senate Energy and Water Development Appropriations Subcommittee.

Sandia is a National Nuclear Security Administration laboratory.

Sandia researcher Malcolm Siegel says each of the demonstration sites tests different arsenic removal technologies. This is the first time a radium removal technology will be tested. Other members of the project team include Ward Hunter, facility management director at Pine Hill School and Sandians Kathleen Holt, Malynda Aragon, Randy Everett, William Holub, and Zachary Satterfield.

S. Deb Misra, director of the Navajo Nation Environmental Protection Agency's Reservation Surface and Ground Water Protection Department, says that his department worked closely with Sandia to select the right site on the reservation for the experiment.

"This working arrangement is an excellent example of government to government collaboration," Misra says. "If the experiments go well and Sandia finds a good and cost effective way of removing arsenic and radium from drinking water, they could benefit the entire country."

The technologies being tested at Pine Hill include an adsorptive media where water is passed through columns for treatment and oxidation coagulation filtration where a chemical is added to a container. The arsenic and radium adsorbs onto a flock or the surface of the filter. The filter media is cleaned by flushing water in the opposite direction and the residue goes into a sanitary sewer.

Other arsenic removal demonstration plants are located at Jemez Pueblo, Socorro, Anthony (Desert Sands), and Rio Rancho. Another is planned for a site in Oklahoma.

Following tests at the Oklahoma demonstration site, Sandia ¿ together with its consortium partners ¿ will publish a report discussing the effectiveness the different arsenic removal processes, along with costs associated with each one. Water utilities needing to remove arsenic from water systems in order to meet the new Environmental Protection Agency (EPA) mandate can refer to the report to determine which system is best for them.

New EPA regulations went into effect in January calling for the reduction of the Maximum Contaminant Level (MCL) from 50 micrograms per liter to 10 micrograms per liter. The intent of the regulation is to reduce the incidence of bladder and lung cancers caused by exposure to arsenic.

Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin company, for the U.S. Department of Energy's National Nuclear Security Administration. With main facilities in Albuquerque, N.M., and Livermore, Calif., Sandia has major R&D responsibilities in national security, energy and environmental technologies, and economic competitiveness.

Sponsored Recommendations

ArmorBlock 5000: Boost Automation Efficiency

April 25, 2024
Discover the transformative benefits of leveraging a scalable On-Machine I/O to improve flexibility, enhance reliability and streamline operations.

Rising Cyber Threats and the Impact on Risk and Resiliency Operations

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...

State of Smart Manufacturing Report Series

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...

SmartSights WIN-911 Alarm Notification Software Enables Faster Response

March 15, 2024
Alarm notification software enables faster response for customers, keeping production on track