PFAS levels between 10 and 70 ppt in Michigan study

Sept. 27, 2018
The $1.7M study is the most comprehensive statewide study of PFAS in water supplies ever.

Source: Michigan Department of Environmental Quality

KALAMAZOO, MI, SEPT 27, 2018 -- The Michigan Department of Environmental Quality (DEQ) recently briefed members of the American Waterworks Association's Michigan Section on the State's study of Per- and Polyfluoroalkyl Substances (PFAS) levels in public water supplies. The $1.7 million study is the first of its kind in the nation.

As of August 31, 2018, the DEQ has overseen the collection of samples from 895 of the State's 1,841 public water systems and schools that operate their own wells. To date, 491 laboratory test results have been received from those samples with 95 percent either showing no detection for PFAS or very low levels ranging from 0 to 10 parts per trillion (ppt). Roughly 5 percent of results have shown PFAS levels between 10 and 70 ppt. Only the city of Parchment's test results have exceeded the EPA Lifetime Health Advisory of 70 ppt for PFAS in drinking water and the DEQ's action level of 70 ppt in groundwater.

"This first-in-the-nation study of all public water systems in the state has resulted in 3,100 Michiganders in Parchment being protected from high levels of previously unknown PFAS contamination in their water supply," said Eric Oswald director of DEQ's drinking water division. "These results also underscore the need for data that can help public water systems guard against emerging contaminants like PFAS and respond to the water treatment challenges they create."

In January 2018, the DEQ acted to set a new clean-up standard for PFAS in groundwater used for drinking water of 70 parts per trillion for perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS) singularly or combined. Michigan is one of only a handful of states to establish a clean-up standard.

The statewide sampling schedule and confirmed test results are published on the MPART web site at: Michigan.gov/PFASresponse.

MPART is overseeing the state's $23 million effort to locate PFAS contamination, identify sources, and oversee remediation activities aimed at protecting the state's water resources and mitigating risks to the public.

In addition to public water systems, some 461 schools that operate their own wells will also be tested under the program. Roughly 75 percent of the state's drinking water comes from public systems. The goal is to complete this statewide study by the end of 2018.

Although private residential wells are not within the scope of the study of public water supplies, information on independent testing and filtering options is available from MPART at: Michigan.gov/PFASresponse

Sponsored Recommendations

ArmorBlock 5000: Boost Automation Efficiency

April 25, 2024
Discover the transformative benefits of leveraging a scalable On-Machine I/O to improve flexibility, enhance reliability and streamline operations.

Rising Cyber Threats and the Impact on Risk and Resiliency Operations

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...

State of Smart Manufacturing Report Series

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...

SmartSights WIN-911 Alarm Notification Software Enables Faster Response

March 15, 2024
Alarm notification software enables faster response for customers, keeping production on track