Hobas CCFRPM Pipe at APWA Phoenix, AZ, Booth 1160

July 28, 2015

After more than a quarter-century of reliable service, most U.S. municipalities have used Hobas pipe for new construction and rehab in critical installations. The pipe is now gaining wide acceptance and Hobas will be an exhibitor at the Phoenix APWA (American Public Works Association) Conference & Expo.

Centrifugally cast, fiberglass-reinforced, polymer mortar Hobas pipe is inherently corrosion resistant and lasts 100 years or more providing a very low life-cycle cost. Key applications are for wastewater in sanitary and storm sewers, industrial applications and virtually all corrosive environments. The versatile pipe is also approved for potable water.

After more than a quarter-century of reliable service, most U.S. municipalities have used Hobas pipe for new construction and rehab in critical installations. The pipe is now gaining wide acceptance and Hobas will be an exhibitor at the Phoenix APWA (American Public Works Association) Conference & Expo. Centrifugally cast, fiberglass-reinforced, polymer mortar Hobas pipe is inherently corrosion resistant and lasts 100 years or more providing a very low life-cycle cost. Key applications are for wastewater in sanitary and storm sewers, industrial applications and virtually all corrosive environments. The versatile pipe is also approved for potable water. [text_ad]<
Main Hobas benefits are inherent corrosion resistance, superior hydraulics, lightweight, high strength and long, maintenance-free service life. Install
ation methods include open cut, sliplining, jacking, microtunneling, two-pass tunnel, casing carrier and above ground. Contractors prefer its leak-free, push-together joints that reduce installation time and costs. Sizes range from 18 to 126 inches for both pressure and gravity applications. Visit Hobas at the APWA Conference & Expo, Phoenix, Arizona, Booth 1160, August 30 through September 1, 2015.
Main Hobas benefits are inherent corrosion resistance, superior hydraulics, lightweight, high strength and long, maintenance-free service life. Install
ation methods include open cut, sliplining, jacking, microtunneling, two-pass tunnel, casing carrier and above ground. Contractors prefer its leak-free, push-together joints that reduce installation time and costs. Sizes range from 18 to 126 inches for both pressure and gravity applications.Visit Hobas at the APWA Conference & Expo, Phoenix, Arizona, Booth 1160, August 30 through September 1, 2015.