Products & Services: Pipes & Fittings

Sept. 1, 2017
Collection of pipes and fittings related equipment products and services.
Fast connect fitting

Experience a leak-free joint and a quick installation with A.Y. McDonald’s new Fast Connect Fitting, which comes in sizes 3/4”, 3/4” x 1”, and 1”. Behaving like a standard three-part coupling but with one-third the amount of rotations required, the secret lies within the assembly itself and its dual-thread design. Instead of containing one brass body, two brass nuts, and two compression gasket assemblies, the Fast Connect Fitting coupling consists of just two brass components, two compression gasket assemblies, and one plastic spacer.

A.Y. McDonald

Fabricated steel tapping sleeve

Mueller Co. recently announced a new H-306HP fabricated steel tapping sleeve. Designed for hot tapping ductile iron pipe and thick-wall C900 plastic pipe, the H-306HP is made from A36 fabricated steel and meets the requirements of AWWA C223. It features an integral bolt flange, Rilsan nylon coating, working pressures up to 300 psi, and is available in sizes from 4” to 16”. This economical tapping sleeve is ideally suited for use with Mueller CL-12, CL36, and Mega-Lite drilling machines in less corrosive soil environments.

Mueller Co.

Wedge action restrainer gland

SIGMA’s One-Lok Series SLDE wedge action restrainer gland for 54-, 60-, and 64-inch ductile iron pipes can serve as a way to reround large diameter pipes in the field. Larger ductile iron pipes are susceptible to shift in transit and handling, often requiring the use of hydraulic jacks on job sites to restore full roundness and specificity prior to installation. The product provides additional areas to the gland body that contain two sets of three jacking bolts positioned 180 degrees apart.


Sanitary sewer infrastructure repair and construction

Eliminate troublesome outside drops and clean up failed inside drops. RELINER® Inside Drop Bowls and Stainless Steel Pipe Support Brackets simply bolt to the manhole wall and can be cleaned and inspected from above. The compact, low-profile bowls are available in dozens of sizes to fit your application. RELINER Modular Manhole Invert Channels improve manhole hydraulics, reducing maintenance, turbulence, and odor. Proudly made in the USA.

RELINER/Duran Inc.

Pipeline rehab

SUEZ Spray-in-Place Pipeline (SIPP) rehabilitation process is a trenchless, efficient and long-lasting solution for the restoration of aging underground piping systems. The SIPP technology uses a computer-controlled, state-of-the-art robotic spray application rig to apply an internal epoxy pipe lining in-situ. The NSF 61-approved, 100%-solids epoxy coating bonds with the pipe, preventing and sealing cracks, and moves with the structure thanks to its high level of elasticity, abating leaks caused by settling. Once cured, it creates a structural seal inside the pipe which restores the pipeline to its original design parameters, prevents future leaks and protects against contaminants leaching into the system.


Centrifugally cast wall pipe

AMERICAN’s fabricated wall pipe uses ductile iron components in combination with the following: cast or threaded on mechanical joint bells (can be tapped for studs), flanges (can be tapped for studs) and welded-on collars. Wall pipe is normally fabricated of special thickness class 53 ductile iron pipe, but it may be furnished with minimum classes unless threaded flanges or threaded mechanical joint bells are included or unless specified otherwise. Wall pipes with centrifugally cast mechanical joint bells will be provided instead with heavy-duty steel key locking thread inserts to accept threaded studs.

AMERICAN Cast Iron Pipe Company


Hobas Pipe’s centrifugally cast, fiberglass-reinforced, polymer mortar pipe is inherently corrosion resistant and lasts 100 years or more. Leak-free, push-together joints reduce installation time and costs. It is widely used in corrosive environments such as industrial effluents, contaminated drainage and foul air as well as cooling and circulating water lines. It is also approved for potable water. Features include: light weight, high strength, ease of installation, leak-free push together joints and adaptability to a variety of installation methods including open cut, sliplining, jacking, microtunneling, two-pass tunnel, casing carrier and above ground. Non-pressure and pressure classes are manufactured in diameters from 18 to 126 inches.

Hobas Pipe