Level meters

Jan. 16, 2017
The Water Level Meter 100 and 200 from In-Situ include static and drawdown modes, allowing users to switch from static level readings to drawdown mode for low-flow and pump tests. 

The Water Level Meter 100 and 200 from In-Situ include static and drawdown modes, allowing users to switch from static level readings to drawdown mode for low-flow and pump tests. The IP68-rated probe can be submerged in depths of up to 300 meters (1,000 feet), and features a safety disconnect, allowing the probe to be released if it gets trapped. The quick-connect probe can then be easily and reliably replaced in the field; there’s no need to send the meter in for repair. The 100 model has Kevlar-reinforced polyethylene tape and is laser engraved, while the 200 model uses ASME-certified high-tensile steel tape encased in a polyethylene jacket.

In-Situ Inc.

www.in-situ.com

Continue Reading

Sponsored Recommendations