EPA issues minor correction to National Primary Drinking Water Regulations

Nov. 18, 2008
As published in the Federal Register, EPA is proposing to make a minor correction to the Stage 2 Disinfectants and Disinfection Byproducts Rule (DBPR) and make minor, unrelated, changes in references to expedited, alternative methods and other analytical methods in the regulations...

• Proposed changes include minor correction to Stage 2 Disinfectants and Disinfection Byproducts Rule and changes in references to analytical methods

WASHINGTON, DC, Nov. 14, 2008 -- As published in the Federal Register, EPA is proposing to make a minor correction to the Stage 2 Disinfectants and Disinfection Byproducts Rule (DBPR) and make minor, unrelated, changes in references to expedited, alternative methods and other analytical methods in the regulations.

EPA promulgated the Stage 2 Disinfectants and Disinfectant Byproducts Rule on January 4, 2006. A requirement for ground water systems serving 500- 9,999 people was unintentionally excluded from the final rule. As a result, the rule allowed for less routine compliance monitoring than intended for this category of Public Water Systems (PWSs). These PWSs should have been required to monitor for both total trihalomethanes (TTHM) and haloacetic acids (HAA5) concentrations at two locations. Due to the error, they were only required to monitor for either TTHM or HAA5 at two locations.

EPA is also proposing to make minor, unrelated changes in the CFR by adding references to the list of methods approved under the Expedited Approval Process, removing references to outdated methods, and specifying a new source for the publication titled Technical Notes on Drinking Water Methods.

The comment period is open. Comments must be received on or before January 13, 2009.

Docket ID No. EPA-HQ-OW- 2008-0644
>> Submit your comments online
Follow the online instructions for submitting comments.

###

Sponsored Recommendations

ArmorBlock 5000: Boost Automation Efficiency

April 25, 2024
Discover the transformative benefits of leveraging a scalable On-Machine I/O to improve flexibility, enhance reliability and streamline operations.

Rising Cyber Threats and the Impact on Risk and Resiliency Operations

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...

State of Smart Manufacturing Report Series

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...

SmartSights WIN-911 Alarm Notification Software Enables Faster Response

March 15, 2024
Alarm notification software enables faster response for customers, keeping production on track