Underwater footage of oil flow now streaming live

May 21, 2010
LONDON, UK, May 21, 2010 -- Today BP launched a live webcam of the flow of oil gushing from the broken riser in the Gulf of Mexico...

• BP launches live webcam of riser flow

LONDON, UK, May 21, 2010 -- Today BP launched a live webcam of the riser flow. The webcam can be viewed at www.bp.com.

BP has been providing a live feed to government entities over the last two weeks -- including the US Department of the Interior, US Coast Guard, Minerals Management Service (MMS) through the Unified Area Command center in Louisiana -- as well as to BP and industry scientists and engineers involved in the effort to stop the spill.

BP continues its work to collect oil by the riser insertion tube tool (RITT) containment system. Once on the drillship Discoverer Enterprise, the oil is then being stored and gas is being flared. The RITT remains a new technology and both its continued operation and its effectiveness in capturing the oil and gas remain uncertain.

BP has, and will continue, to support the government's work to determine the rate of flow from the well. Since the Deepwater Horizon accident, the flow rate estimate has been established by the Unified Command. Throughout the process, BP has made it a priority to quickly and consistently provide the National Oceanic and Atmospheric Administration (NOAA) and the Coast Guard with requested information for the joint command structure to make as accurate an assessment as possible of the rate of flow.

The rate of flow from the riser is determined in a number of ways and by a number of variables. For instance, while the original riser was 19.5 inches in diameter prior to the Deepwater Horizon accident, damage sustained during the accident distorted the diameter at the end of the pipe by about 30 per cent. In addition, a drill pipe currently trapped inside the riser has reduced the flow area by an additional 10 per cent. Thus, some third party estimates of flow, which assume a 19.5 inch diameter, are inaccurate. As well, there is natural gas in the riser. Data on the hydrocarbons recovered to date suggests that the proportion of gas in the plume exiting the riser is, on average, approximately 50 percent.

To provide further specificity on the flow rate, the US government has created a Flow Rate Technical Team (FRTT) to develop a more precise estimate. The FRTT includes the US Coast Guard, NOAA, MMS, Department of Energy (DOE) and the US Geological Survey. The FRTT is mandated to produce a report by close of business on Saturday, May 22.

To support this, BP is in the process of providing FRTT with all requested information, including diagrams and schematics showing release points, amounts of oil and gas currently being collected on the Discoverer Enterprise, and subsea video of the oil release point.

BP Press Office London: +44 20 7496 4076
BP Press office, US: +1 281 366 0265
Unified Command Joint Information Center:+1 985-902-5231

Related Articles
BP oil spill: Slick enters Louisiana wetlands, loop current >
BP oil spill: Tar balls found on Keys shoreline not linked to Deepwater Horizon >
BP oil spill: Some oil could enter loop current; Fishery closures in gulf waters to expand >
BP oil spill: Siphon now working, collecting 'some' oil; Concerns turn toward 'loop current' >
BP oil spill: Setback in attempt to siphon oil from gulf waters, engineers will try again >
BP oil spill: Cleanup battle rages on in waters of Gulf of Mexico >
BP oil spill: Update on cleanup of gulf waters, underwater video released>
BP oil spill: Clean up of gulf waters continues >
BP oil spill: Measures to mitigate wetland damage, stem flow ...>
BP oil spill: Clean-up attempt fails, wetlands under grave threat >