How to Apply and Maintain a Photometric/Colorimetric Analyzer

May 2, 2019
Photometric/colorimetric analyzers can be used to monitor ammonium and orthophosphate. Keys to a successful installation are proper application and maintenance of the instrument.

By Steve Smith

As state environmental agencies and the U.S. Environmental Protection Agency (EPA) require dischargers to reduce the amount of nutrients in their effluent, permitted levels for ammonium and orthophosphate are becoming increasingly tight. As a result, water resource recovery (WRR) plants must monitor for these nutrients.

Photometric/colorimetric analyzers can be used to monitor ammonium and orthophosphate and typically provide lab-quality results that are EPA compliant. Keys to the success of a colorimetric analyzer installation are proper application and maintenance of the instrument.

Functionally, an analyzer receives a sample extracted from the process and combines it with reagents that react with the ammonium or orthophosphate, resulting in a specific sample color. In addition to the colorimetric reagents and calibration standard, these instruments also typically employ a solution to periodically clean the system and photometer.

Color intensity is directly proportional to ammonium or orthophosphate levels. Color intensity is measured photometrically, and the ammonium or orthophosphate level is determined using a calibration curve, based on a standard calibration solution.

Colorimetric analyzers require reagents.

Analyzer Chemical Management

Analyzers consume reagent chemicals, and their operational costs rise and fall with reagent consumption. Each internal cleaning and calibration cycle also consumes chemicals. In some analyzers, the rate of cleaner consumption increases along with water hardness, adding to the cost of operation.

The more reagent consumed with each analysis, the higher the operating cost of the analyzer. Some systems offer internal reagent cooling systems to help extend the life of reagents. Newer analyzer designs, with more precise reagent dosing systems, are capable of reducing chemical costs to significantly less than $200 a month. The analyzer should also track reagent use and provide indication when it’s time to replace it.

Component Wear and Service

Some analyzers need extensive part replacement using an array of tools. Newer analyzers are designed to significantly reduce the number of parts requiring service, virtually eliminate the need for tools, and dramatically reduce the time required to perform routine maintenance. All these features help keep the cost of ownership low, minimize analyzer downtime, and reduce requirements for specialized labor.

Endress+Hauser CA80PH orthophosphate analyzer.

Control system integration

Today, a range of output options exist to bring data from photometric/colorimetric analyzers to a control system. In addition to the traditional analog (4-20 mA) outputs, systems are available with a range of fieldbus digital communications, such as Profibus, Modbus or EtherNet/IP. Additionally, some systems provide the ability to integrate other sensor measurements within the analyzer, expanding the functionality of the analyzer and reducing the capital costs for additional measurement values.

Summary

Photometric/colorimetric analyzers provide valuable information for the efficient operation of a WRR plant. With careful consideration of several key attributes, plant operators can reliably obtain years of high-quality data at a reasonable cost. WW

About the Author: Steven Smith is the senior analytical product marketing manager for Endress+Hauser USA.

Endress+Hauser is exhibiting at ACE19, booth 1739. Learn more at www.us.endress.com.

Circle No. 286 on Reader Service Card

Sponsored Recommendations

ArmorBlock 5000: Boost Automation Efficiency

April 25, 2024
Discover the transformative benefits of leveraging a scalable On-Machine I/O to improve flexibility, enhance reliability and streamline operations.

Rising Cyber Threats and the Impact on Risk and Resiliency Operations

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...

State of Smart Manufacturing Report Series

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...

SmartSights WIN-911 Alarm Notification Software Enables Faster Response

March 15, 2024
Alarm notification software enables faster response for customers, keeping production on track