Pumps

Oct. 1, 2002
Yeomans Series 9500 stainless steel submersible pumps are designed to handle corrosive sewage and wastewaters, light slurries and by-product mixtures.

Submersible pumps

Click here to enlarge image

Yeomans Series 9500 stainless steel submersible pumps are designed to handle corrosive sewage and wastewaters, light slurries and by-product mixtures. The enclosed non-clog impeller design passes large solids with ease. 4 in. and 6 in. discharge sizes cover a wide range of hydraulic requirements. Standard 316 stainless steel construction is suitable for acidic wastewater mixtures.

Yeomans Pump
Aurora, IL
Tel: 630-236-5500
Web: www.yeomanspump.com

Wastewater pump

Click here to enlarge image

Smith & Loveless has introduced the new X-Peller™, specifically designed for 4 in. wet well mounted and flooded suction wastewater pumping applications with high volumes of trash and solids. The pump is dynamically balanced through the full trim with less than 3 mil vibration. Its mono-port flow design expels high volumes of stringy materials, rags and other unusual items found in extreme pumping applications.

Smith & Loveless
Lenexa, KS
Tel: 913-888-5201
Web: www.smithandloveless.com

Pump seals

Click here to enlarge image

USFilter's Davis Products recently released a new mechanical seal system for pumps that minimizes the risk of seal face contamination. Both the upper and lower sets of mechanical seals are inside a precision-engineered Enclosed Block Seal (EBS). Servicing is simplified because each set of seals are "factory set" with correct spring pressure, requiring no field modifications or adjustments.

USFilter's Davis Products
Thomasville, GA
Tel: 800-841-1550
Web: www.usfilter.com

Centrifugal pump

The Trash Hog® solids handling, self-priming centrifugal pump line from A-C Pump and Goulds Pumps, ITT Industries companies, was specifically developed to handle raw sewage, sludge and debris-laden water. Capable of handling solids up to 3 in. in diameter, the pumps feature a non-clog impeller, a removable wearplate, a lightweight 6 in. cleanout cover and an adjustable bearing carrier. Optimum hydraulic performance can be renewed with an external impeller adjustment feature. Capacities range to 6,000 gpm, heads to 140 feet and temperatures to 225ºF.

Click here to enlarge image

ITT Industries
Seneca Falls, NY
Tel: 800-734-7867

Vertical pumps

Click here to enlarge image

Pentair Water Treatment offers a line of multistage vertical pumps under the CodeLine brand name. To date the CodeLine name has been associated with the company's line of RO and UF membrane housings used in the production of process water. The new line of stackable stainless steel pumps is ideal for high pressure applications requiring minimal floor space.

Pentair Water Treatment –Industrial/Municipal Group
Chardon, OH
Tel: 440-279-2821
Web: www.pentairwater.com

Dual drive pumping

Pantropic Power has developed a fully integrated Dual Drive pumping system, consisting of a double-extended shaft centrifugal pump with a reciprocating engine coupled on one end, and a synchronous motor coupled to the other end. Designed for drinking water and wastewater applications, the systems are an alternative to multiple backup generators and removes the complexity of the typical stand-by generator system. They can be tailored for the customer's specific needs and are provided as a complete package.

Pantropic Power
Miami, FL
Tel: 305-477-3329
Web: www.pantropic.com

Dosing pumps

Hanna Instruments produces the Blackstone line of chemical dosing pumps, which are ideal for a variety of municipal applications. The pumps mount to a horizontal or vertical surface and use a minimum amount of space. The valve assembly and unit controls are on the front of the unit for easy plumbing and flow adjustments. The pumps are equipped with a single output control to adjust the flow percentage from 0 to 100% of the pump's rated capacity.

Click here to enlarge image

Hanna Instruments
Temecula, CA
Tel: 888-426-6222
Web: www.hannainst.com

Positive displacement pump

Viking Pump has released the AccuLobe™ Pump, a compact positive displacement pump for use in sanitary applications. The pump features a five lobe rotor design with a one-piece rotorcase/gearcase. The five lobe rotors minimize pulsation, while the precise alignment of the rotorcase/gearcase helps maximize repeatability. The pumps are ideal for pumping shear-sensitive or viscous fluids, and for applications where reproducible flow is necessary. Front-loading seals allow for simple maintenance. The pump is self-draining, yet maintains volumetric efficiency through chamfered cusps around the ports.

Viking Pump, a unit of IDEX Corp.
Cedar Falls, IA
Tel: 319-266-1741
Web: www.vikingpump.com

Plastic pumps

Vanton thermoplastic ANSI end suction magnetically driven pumps incorporate an independent fresh water flushing arrangement which simultaneously cools the inner magnet, lubricates the stationary and rotating sleeve bearings, and prevents settling of abrasive particles. This controlled flow of clear liquid keeps the bearings clean and prevents build-up of debris that may be in the suction line.

Click here to enlarge image

Vanton Pump & Equip. Corp.
Hillside, NJ
Tel: 908-688-4216
Web: www.vanton.com

Non-clog pumps

With flows up to 20,000 gpm and heads to 250 feet, Aurora Pump's non-clog sump and sewage pumps are designed for heavy-duty use in the wastewater industry. The smallest pumps will pass a 3 in. diameter sphere and the largest passes a 7 in. diameter sphere. Features include an efficient skewed vane impeller, which provides smooth flow and maximum ability to avoid clogging.

Click here to enlarge image

Aurora Pump
North Aurora, IL
Tel: 630-859-7000
Web: www.aurorapump.com

Rotary lobe blowers

Kaeser Compressors offers a line of positive displacement rotary lobe blowers. Its proprietary Omega blowers provide flows to 4,400 icfm at pressures to 15 psig and vacuum to 15 in. Hg. These blowers are available with 2 1/2 in. to 8 in. nominal gear diameters and feature flanged inlet and outlet ports.

Click here to enlarge image

Kaeser Compressors, Inc.
Fredericksburg, VA
Tel: 800-777-7873
Web: www.kaeser.com

Chemical dosing

Analytical Measurements offers the Universal Doser Unit, which was developed to provide a simplified system for automatic pH or ORP control. The doser consists of an indicating pH controller mounted on a frame that supports a bellows type feed pump. The pump is adjustable and can provide flow rates over a range of 10 to 1, and by proper bellows selection, can cover a range from 3 to 27 gph.

Click here to enlarge image

Analytical Measurements
Hillside, NJ
Tel: 800-635-5580
Web: www.analyticalmeasurements.com

Reciprocating pumps

Cat Pumps has released its new 150 Frame, R-Series reciprocating pumps. Three new large capacity, energy-efficient models are available with flows up to 320 gpm. The pumps feature duplex stainless steel heads and valve components and solid ceramic plungers. These new large capacity pumps offer continuous-duty performance in demanding applications such as salt water reverse osmosis and wastewater re-injection.

Click here to enlarge image

Cat Pumps
Minneapolis, MN
Tel: 763-780-5440
Web: www.catpumps.com

Metering pumps

LMI has released new literature on its motor-driven metering pumps, which are designed for applications where required outputs are higher than an electronic pump can render. The brochure explains the benefits of its Series M pumps, which can be used for dosing of acids, chlorinated products, bases, coagulants and other chemicals. They also handle difficult to dispense fluids such as polymers and slurries.

Liquid Metronics Inc.
Acton, MA
Tel: 978-263-9800
Web: www.lmipumps.com

Injector pumps

Chem-Feed® C-1100E Injectors meter precise amounts of fluid. The precision molded, heavy duty cartridge head provides enhanced priming, and resists airlocks caused by solids forming chemicals like chlorine. The injectors can receive 4-20 mA, 0-10 vDC and pulsed signal inputs.

Click here to enlarge image

Blue-White Industries
Huntington Beach, CA
Tel: 714-893-8529
Web: www.bluwhite.com

Booster pumps

Flowtronex PSI's MP-Booster is a factory tested, packaged pumping system designed specifically for plant water wash down, irrigation and transfer needs. Standard features include a NEMA 4 enclosed UL 508A listed control panel with main disconnect switch, stainless steel transducers and the Oasis onsite field programmable controller. The system can be equipped with three or four-inch headers and a variety of horsepower options to flow up to 225 gpm and pressures of 130 psi.

Click here to enlarge image

Flowtronex PSI
Dallas, TX
Tel: 614-262-1443
Web: www.flowtronex.com

Grinder pump

The new E/One 1000 Series Grinder Pump from Environment One provides a reliable pump/core for use in pressurized sewer systems. The semi-positive displacement, progressing cavity pump has a nearly vertical H-Q curve. It is a "forgiving" pump design, providing predictable flow over the full range of typical system pressures, strengths critical in a large-scale, low pressure sewer.

Environment One Corp.
Niskayuna, NY
Tel: 518-346-6161
Web: www.eone.com

Portable pumping, sampling

The Reel E-Z® system from Instrumentation Northwest is used in portable sampling and pumping applications in small diameter wells as deep as 250 feet. When used with INW's Happy Hose!® (integrated motor lead, safety cable, and discharge tubing), the system installs the pump in the well, locks it in place, and allows for take up and cleaning without cable entanglement.

Click here to enlarge image

Instrumentation Northwest, Inc.
Kirkland, WA
Tel: 425-822-4434
Web: www.inwusa.com

Chemical dispensers

Click here to enlarge image

Dosatron announces the addition of the new D45-3000 to its line of water-driven proportional chemical dispensers. This new model offers adjustable chemical injection ratios ranging from 1:1000 to 1:3000, providing reliability and repeatability at its lowest chemical dispensing proportion (0.1% to 0.033%). The unit handles a water flow range between 0.4 and 20 gallons per minute.

Dosatron International
Clearwater, FL
Tel: 800-523-8499
Web: www.dosatronusa.com

Centrifugal pumps

Gorman-Rupp has introduced 8 in. and 10 in. sizes to the Super T Series, line of self-priming centrifugal pumps. The line now delivers up to 3300 gpm, and heads up to 130 feet. Based on the respected T Series solids-handling trash pumps, the Super T Series doubles impeller and wearplate life to decrease downtime and keep the pump operating at maximum efficiency. The 8 in. pump offers an external shimless wearplate adjustment for maintenance of the clearance between the impeller and wearplate, which results in increased impeller and wearplate life.

Click here to enlarge image

Gorman-Rupp Co.
Mansfield, OH
Tel: 419-755-1011
Web: www.gormanrupp.com

Pump optimization

Fairbanks Morse has introduced two new product developments. The company's new Turbo Free Suction Elbow provides a smoother inlet flow, improving hydraulic performance and overall efficiency of the pumping unit. With the added benefit of reduced height, the lower profile elbow provides a more stable mounting arrangement for the pump and motor, freeing up more head room in cramped dry wells.

Click here to enlarge image

Fairbanks Morse Pump
Kansas City, KS
Tel: 913-371-5000
Web: www.fmpump.com

Pump controller

Siemens Energy & Automation has introduced the new-generation HydroRanger non-contacting, ultrasonic level monitoring controller that features advanced pump control, relay alarming, differential level measurement, open flow monitoring, and volume conversion. The unit offers single-point monitoring with six relays as standard, as well as digital communications with built-in Modbus RTU via RS-485.

Click here to enlarge image

Siemens Energy & Automation
Spring House, PA
Tel: 215-646-7400
Web: www.sea.siemens.com/ia

Pump service, sales

Flowserve manufacturers and services a complete range of pumps used in municipal water and wastewater applications. In addition to 21 world wide manufacturing centers for new pump requirements, the Pump Division operates 17 Pump Service Centers in North America that provide both field and in-shop repair and reconditioning services.

Flowserve Inc.
Benecia CA
Tel: 800-747-9997
Web: www.flowserve.com

Custom high-head systems

Morris Pumps offers custom-engineered high-head pumping systems. The company can offer units consisting of two Morris Series 7100-NC horizontal-mounted solids-handling pumps arranged in series on a common baseplate. The discharge line from Pump A is directly connected to the suction inlet of Pump B, thus providing double the single-pump design head. Both pumps are driven by a single twin-shafted 1250 hp, 4160-volt electric motor.

Click here to enlarge image

Morris Pumps
Aurora, IL
Tel: 630-236-6900
Web: www.morrispumps.com

Chemical feed pumps

Magnatex® Pumps offers the new Texel® MTA Series Pumps. They feature an ANSI compatible design combined with a chemically inert PFA lining. Available in three models, the series features a ductile iron, armored design that conforms to ANSI B73.3M hydraulic and dimensional standards. Its sealless, mag-drive design eliminates the need for mechanical seals. The pump's PFA fluoropolymer lining offers chemical corrosion resistance.

Click here to enlarge image

Magnatex® Pumps Inc.
Houston, TX
Tel: 713-972-8666

Submersible pumps

The new N-Pump series of pumps from ITT Flygt Corp. have a unique semi-open, screw-shaped impeller that reduces the risk of clogging by its ability to maintain unobstructed impeller-vane leading edges. During pump operation, each leading edge of the rotating impeller passes across a sharp stationary relief-groove that is located in the pump suction.

Click here to enlarge image

ITT Flygt Corp.
Trumbull, CT
Tel: 203-846-2051

Progressing cavity pump

Click here to enlarge image

Moyno® 1000 Progressing Cavity Pumps are available in an open throat configuration. Equipped with a large suction hopper, the pump can transfer viscous materials from its auger assembly to the rotor-stator pumping elements. The pump features the company's hardened, pin-type universal joints, which are sealed and lubricated.

Moyno Inc., a Div of Robbins & Myers
Springfield, OH
Tel: 877-486-6966
Web: www.moyno.com

Open hopper pump

seepex has developed a new type of open hopper pump to transport extremely viscous products and dewatered sludge cake. The pump can transport materials up to three million cPs and municipal wastewater sludge with over 50% solids. The new design uses a feed auger that operates separately from the pump rotor shaft.

Click here to enlarge image

seepex, Inc.
Enon, OH
Tel: 937-864-7150
Web: www.seepex.com

Pump control

ProMinent has developed a new combination pump stroke length and stroke frequency adjustment via a single 4-20 mA input signal. This novel approach to capacity adjustment along with a 4-20 mA output signal which can represent 0 to 100% pump capacity is suited for automated processes where capacity adjustment and feedback are critical.

Click here to enlarge image

ProMinent Fluid Controls, Inc.
Pittsburgh, PA
Tel: 412-787-2484

Access doors

U.S.F. Fabrication manufactures a line of pump access doors and accessories for submersible sewage pumps and submersible propeller pumps. Products include aluminum, steel and stainless steel pump access doors, pump guide rail support brackets, pump hoists, pump lifting bales, and hoists and mast assemblies for submersible propeller pumps. The company has introduced a new interactive CD-ROM and website that features its exclusive Design Wizard.

U.S.F. Fabrication, Inc.
Hialeah, FL
Tel: 800-258-6873
Web: www.usffab.com

Centrifugal pumps

World Chemical's GW Series magnetic-drive centrifugal pumps provide total non-metallic wetted parts and seal-less pump and motor design for continuous duty with wastewater, strong acids, bases, and chemicals that foam. These pumps are constructed with CFR polypropylene thermoplastics; bushings in high purity ceramic and PTFE; and with a SiC pump shaft. They are close coupled to a quality dry-submersible motor with regular and high temp design to 167 F.

Seal-less Solutions L.L.C.
Exton, PA
Tel: 717-626-9694

Pump selection software

Pump-Flo Solutions, a provider of Windows and Web-based pump selection software, has launched Pump-Flo.com (www.pump-flo.com), a free pump sizing and selection internet portal. The Internet site serves as a service for pump buyers, sellers, and educators to size, select and configure centrifugal pumps from leading manufacturers' catalogs.

Click here to enlarge image

Pump-Flo Solutions
Lacey, WA
Tel: 360-412-0702

Sump, sewage pumps

Ridge Tool recently introduced a line of sump pumps, utility and semi-trash pumps and sewage ejection pumps to its product offerings. Consisting of 14 pumps, the new AquaPro™ line of Ridgid pumps features premium materials and heavy-duty construction. The pumps are available for a variety of applications, including sewage ejection, utility water transfer and gray water removal. The pumps are constructed with cast iron impellers. Stainless steel motor housings and impeller plates withstand rust and corrosion in harsh environments.

Click here to enlarge image

Ridge Tool Co.
Elyria, OH
Tel: 800-769-7743
Web: www.ridgid.com

Blowers, vacuum pumps

Gardner Denver Blower Division recently introduced the newly upgraded DuroFlow Industrial 45 Series lobe blower/vacuum pumps, which offer enhanced durability with increased airflow to 1,875 cfm, pressure to 15 psig and vacuum to 16 in. Hg.

Click here to enlarge image

Gardner Denver Blower Division
Peachtree City, GA
Tel: 770-486-5655
Web: www.gardnerdenver.com

Wastewater Pumps

Goulds Pumps' line of Wastewater Pumps includes pumps from 1/4 hp to 30 hp and covers a range of applications from simple water transfer to multi pump engineered lift station arrangements. These pumps handle solids from 3/4 in. to over 3 in. in diameter. Most models offer hard-faced silicon carbide mechanical seals as standard.

Click here to enlarge image

Goulds Pumps
Seneca Falls, NY
Tel: 315-568-2811
Web: www.goulds.com

Sponsored Recommendations

ArmorBlock 5000: Boost Automation Efficiency

April 25, 2024
Discover the transformative benefits of leveraging a scalable On-Machine I/O to improve flexibility, enhance reliability and streamline operations.

Rising Cyber Threats and the Impact on Risk and Resiliency Operations

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...

State of Smart Manufacturing Report Series

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...

SmartSights WIN-911 Alarm Notification Software Enables Faster Response

March 15, 2024
Alarm notification software enables faster response for customers, keeping production on track