Sioux Corp. manufactures a line of application-specific all-electric pressure washers, steam cleaners and combination units that are ideal for cleaning tanks, grit collectors, belt thickeners, and process equipment in wastewater treatment plants.
Sioux Corp. manufactures a line of application-specific all-electric pressure washers, steam cleaners and combination units that are ideal for cleaning tanks, grit collectors, belt thickeners, and process equipment in wastewater treatment plants. These units use electricity to heat the water. Storage tanks are not required and water temperature is available instantly and continuously. All-electric models are designed for use both indoors and outdoors and are ideal for areas where air quality is a priority. The company offers over 45 models with ratings of 0.6 – 5.75 gpm and 100 – 3000 PSI.
Sioux Steam Cleaner Corp.
Tel: 877-763-4039 Web: www.sioux.com
Particle, solids monitoring
Hach's Solitax® sc provides on-line particulate and solids measurement in drinking water, wastewater and industrial applications. The sensor applies a unique, color-independent measurement technique that eliminates repetitive calibration. This system's sc100 controller offers full data communication capabilities to help improve process control and reduce treatment costs associated with polymer use, digester volume, and sludge handling. The sensor's dual-beam infrared/scattered light photometric detection technology has demonstrated immunity to color interference and excellent correlation to primary and secondary sludge laboratory analysis. The self-cleaning sensor wipers reduce erroneous values and maintenance caused by biological growth while eliminating the need for extraneous cleaning and air purge systems.
GF Piping Systems has introduced the next generation of Signet DryLoc pH/ORP Sensors, Models 2724 - 2726. These sensors feature a unique foul-proof DryLoc connector and robust Ryton® sensor body, providing expanded chemical compatibility for use in a wide range of applications. The new threaded process connection design provides flexible mounting choices for easy installation in Georg Fischer and industry-standard threaded fittings and Signet fittings.
GF Piping Systems
Tel: 800-854-4090 Web: www.gfpiping.com
Arsenic test kits
Industrial Test Systems has released two new models of the Arsenic Quick™ mini-kits. The mini-kits, a smaller version of the company's Quick™ kits, are now available in five tests. The new kits, Arsenic Ultra Low Quick™ II (481300-5) with a detection range of 0 to >20 ppb (µg/L) and Arsenic Low Range Quick™ II (481301-5) with a detection range of <0.5 to >50 ppb (µg/L) are ideal for end user testing. All reagents are in powder form and all components needed to accurately detect and measure arsenic are included in a portable ready-to-use kit. The test procedure requires only three reagents that are clearly labeled and color coded to simplify testing. A matching color chart is included with extra large color blocks for quick color matching.
Industrial Test Systems Inc.
Schneider Electric has unveiled the Telemecanique® brand Nautilus™ type XMLG pressure transmitter for fluid control applications. The pressure transmitter converts applied pressure to an electrical signal that can be used to control and/or monitor a process variable. With pressure ranges from -14.5 to 8700 psi, and analog current output as 4-20 mA or a voltage output from 0-10 V, the transmitters can be used anywhere exact pressure measurement is required. The ceramic sensor technology provides high-impact mechanical performance and the transmitter's design provides verified environmental protection with IP66 and IP67 ratings. Short-circuit and reverse polarity protection are standard features, and the product will not leak in the event the destruction pressure is exceeded.
DuroMaxx™ pipe, available from Contech Construction Products, exceeds existing high density polyethylene (HDPE) pipe performance by offering RPE (Reinforced Polyethylene), an innovative process to introduce steel ribbing in the pipe resulting in higher strength, durability and flow rates in a watertight bell and spigot joint system. The engineered polyethylene/steel composite pipe presents a structured outer wall profile and a smooth internal surface. Suitable for both drainage and detention applications, it is extruded using HDPE which is embedded with vertical strips of steel. The composite structure creates a pipe with high strength and relatively low material mass resulting in significant performance attributes.
Contech Construction Products Inc.
Damage marker kit
Almetek Industries has launched a new, compact E-Z Hit Marker Kit to mark damage to underground facilities. The kit conforms to Common Ground Alliance (CGA) Best Practice Documentation standards. It comes in a 19" x 4" crush-proof storage case and includes all the items necessary for the job. The HDPE measure ruler, which features large number graphics, can be unrolled to lie flat or stand on edge with two anchoring spikes and is 6' in length - twice the length of rulers currently in use. The two fiberglass markers can be placed into the ground to show mark and damage areas. Two anchoring spikes and complete user instructions are included.
Exaktime has developed JobClock.NET, a service that enables subscribers to transfer time and attendance records over the Internet from the field. The service brings added convenience to users of the company's JobClock System who have jobsites located far from the main office. Because the attendance records can now be securely transferred on the Internet, customers no longer have to drive into the office, saving time, transportation and labor costs. Most subscribers simply use a PDA with an Internet connection to transmit time data.
Los Angeles, CA