Products & Services: Tanks, Structures
ModuTank has published a 24-page catalog detailing its line of modular tanks available for rent or purchase.
ModuTank has published a 24-page catalog detailing its line of modular tanks available for rent or purchase. The catalog offers information on usages, site assembly, capacity ranges, technical features and specifications. Application case histories featuring outdoor and indoor uses are presented. The catalog also describes secondary containment and available chemical-resistant membrane liners, as well as specialized offerings such as leak detection, covers and piping connections and fittings.
Long Island City, NH
Rainstore3, from Invisible Structures, is a unique structure used to store stormwater underground. Made from injection molded plastic, a single panel contains 36 vertical columns and supports H-20 loading, allowing the construction of driving areas, parking lots, or other small structures above the system. Built-in compression fittings allow units to be stacked to depths up to 8'4". The system offers a 94% open area for water storage and virtually eliminates stone requirements.
Power distribution cabinet
The new FirstLine® OC power distribution cabinet from Staco Energy Products provides a flexible power distribution solution. The cabinet, which is customizable to fit virtually any application, reduces installation time by providing maintenance bypass, branch circuit distribution and voltage transformation in a single cabinet. With up to 96 branch circuit breakers with or without main panel disconnect circuit breakers, the cabinet simplifies the installation, moving, or changing of electrical equipment.
Staco Energy Products Co.
Farwest Corrosion Control has introduced the PowerMag 1000. A cathodic protection controller designed to automatically provide a constant, IR free potential to internal water tank surfaces using magnesium anodes without the need for AC power. The system enables full control over low maintenance sacrificial magnesium anode systems, with no "over voltage" issues. This 100% solid state system requires no external power or batteries, yet provides controlled and regulated cathodic protection current for the internal surfaces of steel reservoirs and is remote monitor ready.
Farwest Corrosion Control Co.
Conical bottom tanks
Chem-Tainer's conical bottom tanks with polyethylene support stands are economical and lighter in weight than the traditional steel stands. The all-polyethylene concept offers greater corrosion resistance and less maintenance. The company offers its cone bottom tanks with polyethylene stands in 21 sizes in both open top and closed head designs. Capacities range from 10 to 3,000 gallons.
W. Babylon, NY
PAX Water's award-winning mixing system prevents disinfectant residual loss and water quality deterioration in distribution storage tanks and reservoirs while reducing both the energy and chemical needs of conventional methods. The submersible mixer easily installs in less than three hours without draining the reservoir, and mixes on-demand to eliminate stratification, uniformly distribute disinfectants and prevent conditions favorable to nitrification.
PAX Water Technologies Inc.
San Rafael, CA
Kee Safety has introduced its new Kee Access safety railing systems to build smooth handrails for stairs, ramps, walkways and other areas where it is necessary to conform to the "barrier-free" requirements of the Americans with Disabilities Act (ADA) and other applicable state and local building codes. Built using the company's Kee Klamp® structural, slip-on railing components, the railings provide a smooth, contiguous gripping surface throughout their entire length.
Kee Safety Inc.
Buffalo, NY Tel: 800-851-5181 Web: www.keesafety.com
Pre-cast wet well
Romtec Utilities has introduced a 10-foot-diameter pre-cast concrete wet well, expanding the capacity of its complete lift station systems. The new wet wells offer greater capacity and accommodate both duplex and triplex pump systems for maximum design flexibility. The new size also makes it easier to locate a well in places where deep excavation is impractical, since it can offer the same capacity as a deeper 8-foot-diameter well, but in a shallower design.
A specially engineered thermoplastic tank designed for storage and transfer of corrosive fluids is now available for outdoor service. Available from Vanton Pump, the 800-gallon tank can be placed in or above the ground, even in direct sunlight. All molded and extruded components are made from polypropylene resin specially compounded with a powerful UV inhibitor. All Vanton standard and custom engineered pump/tank systems feature fluid contact components made of polypropylene or other thermoplastics including polyethylene (PE), polyvinyl chloride (PVC) and polyvinylidene fluoride (PVDF).
The Gamajet rotary cleaning machine can be lowered through any manhole to clean the inside of virtually any size wet well, holding tank or lift station. Personnel remain safely above ground throughout the cleaning operation. The fluid-driven, impingement cleaning machine directs a powerful cleaning stream in a 360 degree pattern for 100% cleaning. Weighing less than 10 lbs. the unit is easily maneuvered into position. No vacuum cleaning is required and cleaning cycles average 10 minutes or less.
Gamajet Cleaning Systems Inc.
Hayward Flow Control Systems has announced availability of a new line of BFA Series Industrial Bulkhead Fittings. Designed to allow safe, quick pipe connections to plastic or metal tanks, the bulkhead fittings come standard with heavy duty, full buttress left hand threads to prevent leaks under pressure. The fittings are molded 1" longer than previous versions for use with thicker or double wall tanks and with a heavy wall thickness to withstand most abuse. They are rated to 150 psi, have EPDM or FPM gasket seals, and feature a hex body for one person installation.
Hayward Flow Control Systems
Sauereisen SewerGard™ No. 210 Glaze offers significant chemical resistance to protect wastewater infrastructure. The epoxy glaze can be used as a finish coat for Sauereisen trowelable, rotary spray, and sprayable versions of the SewerGard family, or as a stand-alone coating for light duty service over concrete or steel. A smooth finish can be attained by roller, spray, or by plural component application methods.
Brass relief valves
Norman Noe offers brass relief valves that help control water system pressure when a water storage tank is off line. The valves are installed on fire hydrants and allow users to pump water directly into the system safely and efficiently for inspection, painting or various emergencies while the water storage tank is out of service. The adjustable valves are preset at 65 psi and come complete with brass fireplug and fire hose discharge adapters and pressure gauge.
Norman Noe Co.
Prestressed concrete tanks
DYK has extensive expertise in the design, prestressing and construction of buried or architecturally enhanced water and wastewater storage tanks. The company's engineering and planning produces stronger, more attractive tanks with greater seismic reliability and a longer lifespan. Over the past 45 years, DYK has worked with clients in well-known municipal and private facilities worldwide to complete the storage of over 3 billion gallons of liquid storage in individual tank sizes ranging from 80,000 gallons to 40 million gallons.
El Cajon, CA Tel: 800-227-8181 Web: www.dyk.com