The Champion Pump 2-HP grinder pump provides up to 133’ TDH and flows up to 42 GPM. The pump features a double-seal configuration with a seal-failure alarm option. The starting components are optional in the pump, eliminating the need for expensive control panels. Also available in 3-Phase. The quick disconnect cord is readily available up to 50’. This allows the pump to easily be replaced without disturbing the wiring in the panel and conduit. The pump is offered as a packaged system complete with guide rails built to specifications.
Circle No. 218 on Reader Service Card
Solinst Canada’s newly redesigned Model 410 Peristaltic Pump is built for fieldwork. The upgraded design makes it even more durable and handy for use in the field. The new pump head is clear, allowing quick, convenient inspection of the pump head tubing before and during operation. The pump head cover is easy to remove for faster cleaning or replacement of the tubing. The pump head tubing guides are made to keep the tubing in place during sampling, no extra tubing clamps required. Also features a new easy-to-reset circuit breaker, which protects the pump’s electronics.
Solinst Canada Ltd.
Circle No. 219 on Reader Service Card
Workforce communication tool
For organizations seeking the ability to enhance productivity, reliability, and customer service, TeamConnect by pdvWireless is a wireless communication and mobile management solution that enables instant one-to-one and group voice communications, GPS-based team member tracking, and instant status updates, including event and field documentation. It helps team leaders improve individual team member performance and overall team productivity, reducing an organization’s expenses and improving its bottom line. TeamConnect Mobile and TeamConnect Hub are available nationwide. TeamConnect 2-Way radio service is currently available in Atlanta, Baltimore/Washington, D.C., Chicago, Dallas, Houston, New York/New Jersey, and Philadelphia.
Self-aligning dome fittings for poly tanks
Assmann provides three sizes of PVC fittings, which provide a vertical plumbing connection at the top of tanks with a radius dome. The ball socket design corrects for the slope of the dome. The fittings have female pipe thread inside and outside of tank wall. Fitting and gasket must be ordered separately. These fittings are also available in Hastelloy and titanium construction, male and double male only.
Assmann Corporation of America
Circle No. 221 on Reader Service Card
Boost efficiencies and sustainability with a Network-as-a-Service (NaaS) solution designed to support smart city initiatives. Neptune’s L900™ technology is the industry’s first LoRa Alliance™ certified solution for AMI. No reprogramming or mode changes are required. Build on the smart water technology you already have and free your city to achieve more. All AMI infrastructure is actively managed and monitored for you.
Neptune Technology Group
Circle No. 222 on Reader Service Card
Pivot head valve keys
Often a valve may lean to one side due to ground shifting or improper setting of the valve by the contractor or municipality. This situation causes difficulty getting a fixed socket valve tool on the operating nut. Sometimes it is impossible. The swiveling socket on the REED VKP valve key will work on any valve regardless of how crooked it has become over time. All REED valve keys feature strong welds at critical points and are made in the USA.
Circle No. 223 on Reader Service Card
Val-Matic is able to supply valves that meet American Iron and Steel (AIS) requirements. The AIS provision requires those receiving assistance from the Clean Water State Revolving Loan Fund (CWSRF) and Drinking Water State Revolving Loan Fund (DWSRF) to use iron and steel products that are produced in the United States. A resource page on the company’s website details all the information for AIS that valves customers might need.
Circle No. 224 on Reader Service Card
Stainless-steel centrifugal pump line
Scot Pump, A Wilo Company, has expanded its line of stamped 304 stainless-steel pumps with NPT connections to include nine new ANSI flanged centerline discharge models. The new 320-328 series covers up to 385 gpm and 275 ft of head. The pumps feature Scot’s proven slip-fit O-ring/flinger design, which prevents leaks caused by deformation as a result of over-tightening. They are mounted on a JM frame and incorporate a back pull-out design and weep holes in the impeller. The weep holes extend seal life by creating fluid movement in the seal cavity, which aids in venting of air at start-up.
Circle No. 225 on Reader Service Card
Reclaimed water wrench nut
Mueller® resilient wedge gate valves now have an option for a purple pentagon-shaped wrench nut, intended for reclaimed water service installations. This wrench nut introduces two distinguishing features: a unique shape requiring a special key for improved security and a purple finish to quickly identify reclaimed water. Purple is recognized by the American Public Works Association to identify “reclaimed” water line components and was adopted in 1980 by the AWWA California-Nevada Section for reclaimed water pipelines.
Mueller® Water Products
Circle No. 226 on Reader Service Card
LMI, a leading manufacturer of controlled-volume metering pumps and a brand of Accudyne Industries, announced the PD Series of chemical metering pumps. The PD Series helps users simplify selection, configuration and operation. The intuitive user interface makes it easy for operators to examine capacity settings and set flow rates to a desired output. These features improve safety and give operators confidence that the pumps are working as configured. New alarm indicators for tank levels are brightly displayed on a large color display.
Circle No. 227 on Reader Service Card
Wireless valve monitoring
Rotork’s RI Wireless is an end-to-end solution for wireless valve monitoring. It provides real-time full-range position indication to the control system and enables predictive maintenance on actuated valves. The system is field-proven in a variety of industries and applications and has been shown to drive CAPEX and OPEX reduction while increasing safety and productivity. The position sensor can be adapted to any valve or valve and actuator combination. The associated scalable mesh network provides redundancy and is easily configured and integrated into standard automations systems: PLC, DCS, SCADA.
Circle No. 228 on Reader Service Card
Grundfos SMART Digital dosing pumps are programmed to dose exactly the right amount of chemicals to meet treatment needs while reducing operation costs. These intelligent pumps offer consistent flow and accurate process control for industrial water and wastewater applications, extending the life of your RO membranes.
Grundfos, an Evoqua brand
Circle No. 229 on Reader Service Card
The DATAWATCH IX vibration monitor recording device features a striking graphical VGA display, and four or eight universal inputs for data display and recording. Designed for 4-20 mA vibration transmitter inputs. The 88 mm (3.5 in) display offers crystal clear visualization of vibration and process parameters with a wide selection of configurable views to best suit the application. Can be ordered mounted within a NEMA 4X enclosure that has been pre-wired and configured for your convenience.
Circle No. 230 on Reader Service Card
The compact design of De Nora’s Next Gen Capital Controls® Chlorinators incorporates existing Capital Controls technology with exciting new features. With just three models ranging from 10 to 10,000 ppd capacity, each chlorinator is available with automatic or manual feed and a 10” flowmeter for an easier read. Sonic operation on the 4100 model eliminates the need for a differential pressure regulator. On all automatic models, an additional controller isn’t needed, reducing components and costs.
De Nora Water Technologies
Circle No. 231 on Reader Service Card
GEMÜ Group offers an extensive range of products presenting solutions for numerous applications. The GEMU 613 Diaphragm Valve is a plastic diaphragm ideal for use in water, seawater desalination and wastewater treatment. Features include: low maintenance electric actuator with reversible synchronous motor; reduction gear operated via a cam; a spring that ensures continuous contact between the cam and the valve spindle; and optical position indicator.
Circle No. 232 on Reader Service Card