Grinder pump
The Champion Pump 2-HP grinder pump provides up to 133’ TDH and flows up to 42 GPM. The pump features a double-seal configuration with a seal-failure alarm option. The starting components are optional in the pump, eliminating the need for expensive control panels. Also available in 3-Phase. The quick disconnect cord is readily available up to 50’. This allows the pump to easily be replaced without disturbing the wiring in the panel and conduit. The pump is offered as a packaged system complete with guide rails built to specifications.
Champion Pump
www.championpump.com
Circle No. 200 on Reader Service Card
Peristaltic pump
Solinst Canada’s newly redesigned Model 410 Peristaltic Pump is built for fieldwork. The upgraded design makes it even more durable and handy for use in the field. The new pump head is clear, allowing quick, convenient inspection of the pump head tubing before and during operation. The pump head cover is easy to remove for faster cleaning or replacement of the tubing. The pump head tubing guides are made to keep the tubing in place during sampling; no extra tubing clamps required. Also features a new easy-to-reset circuit breaker, which protects the pump’s electronics.
Solinst Canada Ltd.
www.solinst.com
Circle No. 201 on Reader Service Card
Self-aligning dome fittings for poly tanks
Assmann provides three sizes of PVC fittings, which provide a vertical plumbing connection at the top of tanks with a radius dome. The ball socket design corrects for the slope of the dome. The fittings have female pipe thread inside and outside of tank wall. Fitting and gasket must be ordered separately. These fittings are also available in Hastelloy and titanium construction, male and double male only.
Assmann Corporation of America
www.assmann-usa.com
Circle No. 202 on Reader Service Card
NaaS solution
Boost efficiencies and sustainability with a Network-as-a-Service (NaaS) solution designed to support smart city initiatives. Leverage Neptune L900™ technology — the industry’s first LoRa Alliance™ certified solution for AMI. No reprogramming or mode changes are required. Build on the smart water technology you already have and free your city to achieve more. All AMI infrastructure is actively managed and monitored for you.
Neptune Technology Group
www.neptunetg.com
Circle No. 203 on Reader Service Card
Pivot head valve keys
Often a valve may lean to one side due to ground shifting or improper setting of the valve by the contractor or municipality. This situation causes difficulty getting a fixed socket valve tool on the operating nut. Sometimes it is impossible. The swiveling socket on the REED VKP valve key will work on any valve regardless of how crooked it has become over time. All REED valve keys feature strong welds at critical points and are made in the USA.
REED Manufacturing
www.reedmfgco.com
Circle No. 204 on Reader Service Card
AIS-compliant valves
Val-Matic is able to supply valves that meet American Iron and Steel (AIS) requirements, a provision that requires those receiving assistance from the Clean Water State Revolving Loan Fund (CWSRF) and Drinking Water State Revolving Loan Fund (DWSRF) to use iron and steel products produced in the United States. Val-Matic is committed to providing American-made products and has created a resource page on its website detailing the information for AIS valves.
Val-Matic
www.valmatic.com
Circle No. 205 on Reader Service Card
