New Products

The Vertiflo Pump Company’s rugged Model 1312 close-coupled, horizontal, end suction pump for service in general pumping, chemicals, wash systems, deionized water, process and OEM applications is especially useful for pumping from tank to tank and into transport trucks. The Model 1312 is designed for long life in tough services with heads to 160 feet TDH and flows to 240 GPM. 1750 and 3500 RPM sizes are available. Back pull-out design construction allows rotating element to be easily removed, casing remains in piping. Casing may be rotated in 90° increments to accommodate various piping and discharge orientation options or requirements.

Vertiflo Pump Company

www.vertiflopump.com

Conval offers Clampseal® in-line serviceable Y, angle and T-pattern globe stop, check, and stop check valves. These U.S.-made forged valves are available in 1/2” through 4” sizes through ASME #4500 Class with socket weld, butt weld, threaded, clamp connector, flanged ends or a variety of specials. Materials include carbon steel SA105, low alloy SA 182-F22 and F91, stainless steel SA 182-F316, and SA 182-F347. Features include conformance to ASME B16.34, ASME B31.1, API, ASME section III and more; pressure seal bonnet for maintainability; quick-replacement packing chamber; single-piece gland with integral gland wrench; solid Stellite seating surfaces; and two-year warranty.

Conval Inc.

www.conval.com

Total Piping Solutions introduces the Quick Sleeve Bell Join Encapsulation Sleeve. Available in sizes from 4” to 12” diameters, each sleeve is capable of wide range coverage to encapsulate and repair PVC, ductile iron and cast iron bells. The Quick Sleeve will cover old couplings and flanges, and is good for use on DIP, CIP, and PVC pipe systems. Eliminate issues associated with open cut repair such as disinfection, large excavation, shut down and boil notices.

Total Piping Solutions Inc.

www.tps.us

The Chlor-Scale® Ton Container Scale from Force Flow provides an accurate and reliable way to monitor the amount of chlorine used in your disinfection process. Knowing the exact amount fed allows you to document that target disinfection levels have been consistently met. Knowing how much chlorine remains in the tank also helps prevent running out of chemical and stops the costly mistake of tanks being sent back to the supplier with chlorine still in them. The steel rectangular tube platform is robotically welded then epoxy-powder-coated to ensure maximum strength for safety and durability. Electronic and hydraulic versions available.

Force Flow

www.forceflow.com

Phoenix Contact introduces the HMC series of circuit breakers, the company’s first 120 V AC hydraulic-magnetic circuit breakers for use in Class I, Division 2 applications. The UL-approved products utilize a fully sealed hydraulic-magnetic design that allows for accurate power switching and reliable overcurrent protection. Each breaker is rated for 50 V DC, and breakers up to 15 A are also dual-rated at 120 V AC. They have a short circuit current rating (SCCR) of 1 kA and a temperature operating range from -40°C to +65°C. Pluggable line and load terminations along with the unique T-bus option allow breakers to snap into a common power bus. These features ease installation and reduce wiring.

Phoenix Contact

www.phoenixcontact.com

KROHNE’s OPTIBAR LC 1010 submersible level probe with ceramic diaphragm provides a simple and continuous hydrostatic level measurement solution for water wells, rainwater retaining/overflow basins, or tanks. It features a robust 316L stainless steel housing and a high overload-proof ceramic diaphragm for long operating life. For safe and easy cleaning on site, the diaphragm is flush mounted. It comes with pre-configured measuring ranges from 100 mbar/10 kPa/1.5 psi to up 10 bar/1 MPa/150 psi; customer-specific ranges are available on request.

KROHNE

www.krohne.com