WEFTEC: Exhibitor Products: Part 3
Filter press spray system
Belt Blaster is an accessory spray system to address persistent belt fouling and support optimized equipment operation. Clogging of porous belts, found on belt filter press systems and gravity belt thickeners, greatly reduces the operational capacity of the primary machine. The dynamic water lance spray disperses build up so water may travel through the belt weave.
WeirWasher Automated Cleaning Systems
Circle No. 300 on Reader Service Card
In municipal applications, the ECO2 SuperOxygenation technology eliminates the formation of hydrogen sulfide using a device called the SuperOxygenation Cone. Pure oxygen is dissolved into the wastewater to prevent the formation of hydrogen sulfide by keeping the pipeline aerobic. As hydrogen sulfide is eliminated, the “rotten egg” odor associated with the gas is eliminated and no sulfuric acid is formed to corrode conveyance structures.
ECO Oxygen Technologies, LLC
Tel: 317-706-6483 Web: www.eco2tech.com
Circle No. 302 on Reader Service Card
Process seal gauge
REOTEMP’s new Process Seal Gauge™ combines a high accuracy diaphragm seal with a process gauge, creating one all-welded unit. The integrated design makes the gauge more economical than comparable seal assemblies, while maintaining accuracy. This design also eliminates most potential leak points and decreases the installation/removal time. The gauge is suited to a variety of markets, including water and wastewater.
San Diego, CA
Circle No. 301 on Reader Service Card
The patented SpectraShield® liner is a spray applied silicone modified polyurea system that is used to rehabilitate and protect wastewater structures such as manholes, wet wells, or wastewater facilities. Following preparation, the lining process begins with a first barrier coat of the silicone modified polyurea. This moisture barrier and adhesion coat becomes the inside layer of a multi-layered system. Next a surfacing coat of closed cell foam is applied.
Spectrashield Liner Systems
Circle No. 303 on Reader Service Card
Smith-Blair has added the Pipe-Lock to its Joint Restraint product line. The fabricated steel sleeve restraint coupling can be used to connect and restrain plain end pipe to plain end pipe. Its restrained joint requires no other method of restraining the pipe. The Pipe-Lock is available in straight, transition and reducing complete couplings. It is designed to be used with the Multi-Seal Gasket for more flexibility in nominal sizes 4"-12".
Texarkana, AR Tel: 800-643-9705 Web: www.smith-blair.com
Circle No. 305 on Reader Service Card
Catch basin cleaners
Super Products’ Camel® sewer and catch basin cleaners feature a single control panel set-up that even the newest employee can quickly learn; unique ejector plate unloading for faster, cleaner debris removal and washdowns; and a single engine design that lowers fuel cost, maintenance needs and sound levels. The trucks are also available with hydro excavation features to increase vehicle operation capability and an optional water recycling system to reduce time and costs association with replenishing water supply.
Super Products LLC
Circle No. 304 on Reader Service Card
LaMotte has introduced its 2020 ClearTrace Turbidity System for continuous monitoring of low level turbidity in clean water applications. Compliant with USEPA Method 180.1 for drinking water, the device measurement range is 0 to 100 NTU and is optimized for the 0 to 1.0 NTU range with a 0.001 NTU resolution.
Circle No. 306 on Reader Service Card
Casing end seal
PSI-Pipeline Seal & Insulator has introduced the Model R Casing End Seal, for sealing the ends of cased pipes or containment pipes. It is the first adjustable and stockable casing end seal. The molded EPDM end seal is available in five model sizes; these sizes accommodate various casing pipe O.D. to carrier pipe O.D. applications. The largest one is sized for a casing pipe OD of either 20" or 24" and can accommodate all carrier pipe sizes from 6" and larger.
Pipeline Seal & Insulator Inc.
Houston, TX Tel: 800-423-2410 Web: www.pipelineseal.com
Circle No. 307 on Reader Service Card
Steel storage tanks
Superior Tank offers a line of Bolted and Welded Steel Storage tanks for the potable water and wastewater industries. The company has been manufacturing and installing bolted and welded steel tanks since 1984. Its tanks are powder coated at the factory. Tanks can be designed to AWWA D103-97, NFPA-22 and Factory Mutual specifications. Stainless steel bolted tanks are also available.
Superior Tank Co.
Rancho Cucamonga, CA
Circle No. 308 on Reader Service Card
Gardner Denver has introduced the intelligent IQ blower package. The package includes the integral AirSmart™ Controller to provide critical component monitoring. It also has an integrated full-voltage starter. A variable frequency drive is available. The package is quiet (as low as 60 dBA), has a compact design and offers high efficiency air delivery for wastewater treatment applications.
Circle No. 309 on Reader Service Card
Hach’s SOLITAX® sc provides on-line particulate and solids measurement in drinking water, wastewater and industrial applications. The sensor applies a unique, color-independent measurement technique that eliminates repetitive calibration. The system’s sc100 controller offers full data communication capabilities to help improve process control and reduce treatment costs associated with polymer use, digester volume, and sludge handling.
Circle No. 310 on Reader Service Card
Valve maintenance trailer
The new Wachs VMT-2™ Valve Maintenance Trailer offers most of the equipment needed to maintain water valve infrastructure, plus the power to handle all but the most stubborn valves. The trailer is built on an all welded steel chassis with heavy duty axle, and includes a powerful vacuum unit and rear-facing, power tilt high capacity spoils tank. The most popular configuration includes the ERV-750™ extended reach valve operator and Recon handheld controller.
Circle No. 311 on Reader Service Card
Polymer blending systems
The dynaBLEND™ pre-engineered liquid polymer blending systems, from Fluid Dynamics, feature diaphragm metering or progressing cavity pumps. The patented hydrodynamic or mechanical mixing provides polymer activation technology paired to particular process and flow demands. Control options range from simple manual systems to fully instrumented PLC-based units with an unlimited variety of inputs and outputs.
Fluid Dynamics Inc.
Tel: 888-363-7886 Web: www.dynablend.com
Circle No. 312 on Reader Service Card
Asset management software
MWH Soft has released its platform-independent CapPlan XL, expanding the capabilities of the modeling and asset management software. The software allows engineers to optimize sewer system renewal planning using virtually any GIS and sewer modeling software. It extends the capability and usability of sewer modeling software enabling users to effectively create fully prioritized short- and long-term sewer rehabilitation, maintenance and management plans and develop cost-effective capital programs to support them.
Circle No. 313 on Reader Service Card
Compressed air management
Kaeser Compressors’ Sigma Air Manager (SAM) monitors, sequences and analyzes low pressure air or vacuum system performance. It allows auto-dual control, balances service hours, prevents simultaneous motor starts and maintains tight pressure band control. The manager can be adapted to almost any system and can manage up to 16 blowers, including differing brands.
Circle No. 314 on Reader Service Card
OdoWatch®, available through N.A. Water systems, provides continuous, real-time odor monitoring at municipal wastewater treatment plants. The system automatically alerts operators to the need for adjustments to prevent odor complaints.
N.A. Water Systems
Circle No. 315 on Reader Service Card
APCO Valve & Primer produces a complete line of Air Release / Air Vacuum Valves. The company also manufactures the following valves: Silent Check, Slanting Disc Check, Cushioned Swing Check, Rubber Flapper Check, Automatic Control, Double Door Check, Metal Seated Ball and Cone Valves.
APCO Valve & Primer Corp.
Circle No. 316 on Reader Service Card