WEFTEC: Exhibitor Products: Part 4

Sept. 1, 2009

Expansion joints

Click here to enlarge image

The Force Balanced Flex-Tend® Flexible Expansion Joint from EBAA Iron can accommodate pressure-induced thrust forces. It uses an additional water chamber piston that acts in the equal and opposite direction of the imparting thrust and neutralizes the thrust forces. This allows designers to use flexible expansion joints in applications where thrust blocks or other force-restricting devices are not applicable.
EBAA Iron Inc.
Eastland, TX
Tel: 800-433-1716
Web: www.ebaa.com
Booth 2823
Circle No. 317 on Reader Service Card

Dewatering system

Click here to enlarge image

EIMCO Water Technologies’ Linear Electro-Dewatering (LED) systems are designed to extract water from industrial and municipal sludge. The company’s Cinetik™ line of products rely on the combined action of a controlled mechanical pressure and electro-osmosis, where an electrical field generated inside the sludge liberates and carries away the water bonded to hydrophilic particles. Installed in a WWTP, after existing mechanical dewatering equipment, the units allow for high dryness levels (up to 50% TS), even for secondary and mixed biological sludge.
Eimco Water Technologies
Tel: 450-641-3611 Web: www.ewt-cinetik.com
Booth 2445
Circle No. 318 on Reader Service Card

Package treatment system

Click here to enlarge image

The Trident® HS from Siemens Water Technologies is a multi-barrier packaged treatment system that helps municipalities and industries meet treatment goals for ultra-low-level phosphorus reduction and water reuse. The technology offers a high-rate, two-stage clarification system that removes both settling and non-settling solids while providing built-in redundancy.
Siemens Water Technologies
Tel: 800-525-0658
Web: www.water.siemens.com
Booth 3045
Circle No. 319 on Reader Service Card

Solids handling pump

Click here to enlarge image

ITT Water & Wastewater offers the FLYGT A-C Series featuring the “Shearpeller” pump designed to handle large solids-in-suspension, slurries, heavy viscous material and gas entrained liquids to 25% air vapor. The “Shearpeller” or model “NSX” was originally designed by A-C pump as a solution to handling large solids while not becoming air-bound.
ITT Water & Wastewater, USA
Trumbull, CT
Tel: 203-380-4700
Web: www.us.ittwww.com
Booth 3003
Circle No. 320 on Reader Service Card

Coating systems

Click here to enlarge image

Developed to provide reliable data to the water and wastewater market, Sherwin-Williams Protective & Marine Coatings’ Waterblog creates an avenue for owners, operators and specifiers to converse with industry leading experts about high performance protective coating solutions.
Sherwin-Williams Protective & Marine Coatings
Cleveland, OH
Tel: 800-524-5979
Web: http://waterblog.sherwinblogs.com
Booth 4033
Circle No. 321 on Reader Service Card

Level detector

Click here to enlarge image

The Opti-Float® level detector uses light instead of electricity, is non-mechanical and mercury free. Because the level detector uses fiber optic cable and light instead of copper wires and electricity, it can be used directly in explosive areas such as wastewater pump station wet wells. The float, cable and UL/CSA listed transceiver are durable and have been tested to over 1,000,000 operations.
Cox Research and Technology Inc.
Tel: 225-756-3271
Web: www.coxresearch.com
Booth 4082
Circle No. 322 on Reader Service Card

Automatic filter

Click here to enlarge image

The new Orival ORE/A series of electrically driven automatic self-cleaning screen filters incorporate feature combinations not found on any other filter. The single-direction electric motor drive requires no limit switches or reversing contactors; thus, eliminating troublesome components.
Orival Inc.
Tel: 800-567-9767
Web: www.orival.com
Booth 4563
Circle No. 323 on Reader Service Card

Valve actuators

Click here to enlarge image

When higher chlorine feed rates require liquid withdrawal from containers for use with evaporators, it becomes extremely important to monitor and control the status of each valve on the container. Robo-Control® provides actuators to open and close the container valve. Digital indication of valve position and outputs for valve position are available. The actuator will communicate with an RTU or PLC for SCADA or in-plant control.
Robo-Control
Bridge City, TX
Tel: 409-697-2666
Web: www.robo-control.com
Booth 2149
Circle No. 324 on Reader Service Card

Leak noise correlator

Click here to enlarge image

The new LC-2500 Leak Noise Correlator from SubSurface Leak Detection is an improvement on its predecessor, the LC-2100. The new unit correlates four times faster, and the radio transmitters are four times more powerful, transmitting up to 3500 feet to the main processor unit and traveling over hills and around tall buildings.
SubSurface Leak Detection Inc.
San Jose, CA
Tel: 408-249-4673
Web: www.subsurfaceleak.com
Booth 3917
Circle No. 325 on Reader Service Card

Restrained joint pipe

Click here to enlarge image

The Horizontal Directional Drilling (HDD) pipeline installation method is becoming more common in the water industry. U.S. Pipe’s TR Flex® Restrained Joint pipe is approved for use in applications using HDD. It provides easy assembly and positive thrust restraint, and withstands the unique rigors and demands of HDD.
U.S. Pipe and Foundry Co.
Birmingham, AL
Tel: 866-347-7473
Web: www.uspipe.com
Booth 2515
Circle No. 326 on Reader Service Card

Control valves

Click here to enlarge image

The OCV ValveMeter Ultra is a stand-alone, electronic flow measuring and control system. Based upon the variables of valve differential pressure and valve position, the system automatically calculates and displays the flow rate and signals the solenoids on the control valve to control the flow rate at a given set point. There is no need for a separate flow meter in the line.
OCV Control Valves
Tulsa, OK
Tel: 888-628-8258
Web: www.controlvalves.com
Booth 4509
Circle No. 327 on Reader Service Card

Rubber check valves

Click here to enlarge image

Proco Products is a supplier of expansion joints and other piping related products. Its newest product is the ProFlex series 700 Rubber Check Valve. The valve is manufactured completely from top quality fungicide- and barnacle-resistant rubber. It is therefore impervious to the daily operational vulnerability affiliated with the water and sewage industry such as rust, freezing, corrosion and seizing.
Proco Products Inc.
Stockton, CA
Tel: 800-344-3246
Web: www.procoproducts.com
Booth 3002
Circle No. 328 on Reader Service Card

Master pressure gauge

Click here to enlarge image

When testing or certifying pressure monitoring devices, the calibration is only as good as the master instrument used for comparison. Ashcroft has carefully engineered the Type 1082 and 1084 test gauges for sustained accuracy and high reliability. Available in 4 ½", 6" and 8 ½" diameters, the Type 1082 boasts ±0.25%FS accuracy in ranges from vacuum through 10,000 psi.
Ashcroft
Stratford, CT
Tel: 800-328-8258
Web: www.ashcroft.com
Booth 2847
Circle No. 329 on Reader Service Card

Data collection

Click here to enlarge image

Telogers Enterprise 4.0, the latest version of Telog Instruments’ data collection and information system for the wastewater management industry, now offers three important new features: Improved time zone data management for users who host and analyze data for customers in different time zones; A lift station algorithm, which allows users to monitor their lift stations effectively and find trouble spots before they become flood events.
Telog Instruments Inc.
Web: www.telog.com
Booth 4421
Circle No. 330 on Reader Service Card

Aeration systems

Click here to enlarge image

MTS/Mass Transfer Systems designs and manufactures the MTS jet aeration product for industrial and municipal water and wastewater treatment. The system uses two-phase jet nozzles to supply atmospheric oxygen to recirculated liquid in a proprietary mixing system. The company specializes in jet aeration system design for existing and new basins, plus manufacture, installation and start-up of aeration systems for biological wastewater treatment processes including a variety of industrial mixing applications.
MTS/Mass Transfer Systems
Walpole, MA
Tel: 508-660-9150
Web: www.mtsjets.com
Booth 3775
Circle No. 331 on Reader Service Card

Aeration compressor

Click here to enlarge image
The ABS High Speed Turbocompressor is specifically designed for aeration processes. Its magnetic bearing technology has no wearing parts or vibration. The system offers VFD speed control, with no mechanical control devices (e.g. IGV, VVD). Operation is quiet at <81 dBA. The system delivers oil free air to the process and has an integrated soft start, real time monitoring and fault protection.ABS Group USATel: 800-525-7790Web: www.absgroupusa.com Booth 4635Circle No. 332 on Reader Service Card

Onsite hypochlorite generation

Click here to enlarge image

Process Solutions has introduced the MicrOclor Hypochlorite Generating System, a third generation system resulting from over 20 years of research and experience. The system provides the current industry standard features while significantly improving all safety and reliability aspects of the process. Its V-Ray electrolytic cells are vertically oriented to allow rapid hydrogen release.
Process Solutions Inc.
Campbell, CA
Tel: 408-370-6540
Web: www.4psi.net
Booth 1722
Circle No. 334 on Reader Service Card

Level transmitter

The BC001 Birdcage submersible level transmitter from Blue Ribbon now features a life-time warranty replacement program for damage due to lightning or voltage surges when the BCP3000 Surge Protector is properly installed and grounded in the panel system. To qualify for a replacement transmitter, the non-working transmitter must be returned to Blue Ribbon with the surge protector to be evaluated for the cause of failure.
Blue Ribbon Corp.
Grand Island, NY
Tel: 716-773-9300
Web: www.blueribboncorp.com
Booth 1716
Circle No. 335 on Reader Service Card

Submersible level transmitter

Click here to enlarge image

The PMC VersaLine VL4500 Series (Millivolt) submersible transducer offers high integrity construction in a compact design with 100 mV output at 10 vDC excitation for most ranges. It is suited for applications where power consumption needs to be minimal. Typical applications for this 0.725” diameter transmitter are small size bore holes, wells, dams and irrigation.
Process Measurement & Controls Inc.
Danbury, CT
Tel: 203-792-8686
Web: www.pmc1.com
Booth 2175
Circle No. 336 on Reader Service Card

Grinding system

Click here to enlarge image

The Taskmaster Titan (TM22000) is a twin shaft channel grinding system featuring super-heavy construction for the toughest applications. It features large cutting chambers capable of handling bulky solids and high flows with low headloss. The grinder provides up to 10 times the cutting surfaces of competing units. It employs two counter-rotating shafts with one cutter stack intermeshing with a second one with a greater diameter.
Franklin Miller Inc.
Livingston, NJ
Tel: 973-535-9200 Web: www.franklinmiller.com
Booth 3609
Circle No. 333 on Reader Service Card

Click Here to Continue to WEFTEC: Exhibitor Products: Part 5

More Water World Issue Articles

Sponsored Recommendations

ArmorBlock 5000: Boost Automation Efficiency

April 25, 2024
Discover the transformative benefits of leveraging a scalable On-Machine I/O to improve flexibility, enhance reliability and streamline operations.

Rising Cyber Threats and the Impact on Risk and Resiliency Operations

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...

State of Smart Manufacturing Report Series

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...

SmartSights WIN-911 Alarm Notification Software Enables Faster Response

March 15, 2024
Alarm notification software enables faster response for customers, keeping production on track