Polywrap for corrosion protection
AA Thread's Polyethylene Encasement, or Polywrap, has been proven to be just as effective as other corrosion protection methods for ductile iron pipe at a fraction of the cost. This is due to the fact that it is installed at the job site by the contractor with no special training required. Polywrap does not deteriorate once installed under the ground and will protect pipeline from exterior corrosion for years to come. Polywrap can be low or high density and comes in a variety of sizes, thicknesses and colors for specific applications.
AA Thread Seal Tape Inc.
www.aathread.com
Tapping sleeve
The Triple Tap® from Total Piping Solutions is a widest-range tapping sleeve. Select one of two options: The low-range shell, which typically covers IPS through AC Class 150; and the high-range shell, which covers DIP through AC Class 200. Its design features Type-304 stainless steel construction with no-gall stainless steel bolts. The gasket is an NSF 61-registered NBR compound for water or sewerage. Triple Tap is available in diameters from 4" to 16", meets AWWA C223-13 for tapping sleeves and carries a pressure rating up to 250 psi with test to 350 psi.
Total Piping Solutions
www.tps.com
Rotary cutters
Reed's Low Clearance Rotary™ Cutters need only 5" clearance to cut pipe up to 16" in diameter. The manual-operated cutters cold-cut large diameter steel, most stainless steel, ductile, and cast iron pipe in close quarters. The cutters are supplied with a slip-on handle that is used to turn and tighten the cutter. With good leverage from the tool's long handle, pipe snaps off squarely before the cutter wheels penetrate halfway through the pipe. The tool provides a square cut and can be used in close quarters anywhere -- in the ditch, underwater, overhead, etc.
Reed Manufacturing
www.reedmfgco.com
Pipe supports
Pipe supports from RELINER®/Duran are easily-installed, adjustable clamping pipe brackets made of non-corrosive, 11-gauge 304 stainless steel. They securely attach pipes to manhole walls and other surfaces with no protruding hardware and are fully adjustable to fit irregular surfaces. Often used with the RELINER Inside Drop Bowl to eliminate outside drops in sanitary sewers or stormwater drops, they attach to the wall with 3/8" stainless steel bolts in non-corrosive shields. A wide range of clamp sizes of 1.5" – 30" for SDR 35, Schedule 40, C900, and CIOD are kept in stock, while other sizes are produced.
Reliner/Duran Inc.
www.reliner.com
PVC products
Underground Solutions' Fusible PVC® pipe products, including Fusible C-900®, Fusible C-905® and FPVC®, utilize patented technology to produce a fused, monolithic, fully-restrained, gasket-free, leak-free piping system ideal for trenchless (horizontal directional drilling, pipe bursting and sliplining) or conventional "open-cut" installations. The combination of standard fittings and lower weight with higher flow for a given pressure class versus other thermoplastic pipe ensures that Fusible PVC pipe brings greater economy to most pipeline projects. The systems are available in 4" – 36" diameters.
Underground Solutions
www.undergroundsolutions.com
Piping elbow
When a piping elbow fails, there are maintenance expenses, installation considerations, loss of conveyed product, environmental concerns, and lost production due to system downtime, among other concerns. HammerTek's Smart Elbow® for pneumatic and slurry conveying systems virtually eliminates elbow wear, product degradation, plugging, surging, cross-contamination, noise, and turbulence. The technology changes direction by deflection, eliminating the impact zone and thereby eliminating elbow wear, friction and product degradation. A free trial and one-year warranty programs are also available.
HammerTek Corporation
www.hammertek.com
Pipe coupling
Baldor Electric has announced a new addition to its Baldor-Dodge coupling product offering -- the QD bushed Para-Flex coupling. The Baldor-Dodge Para-Flex QD (PXQD) product line is available in sizes PX50 through PX200, with torque ratings through 82,500 in-lbs. PXQD flanges offer greater bore capacity, allowing customers to save money by downsizing their coupling selections. The QD bushing allows for easy installation and removal with minimal shaft damage, reducing overall replacement costs.
Baldor Electric Company
www.baldor.com
Management software
Engineered Software's PIPE-FLO® Professional v14.0 is widely used in the three phases of piping projects: engineering, commissioning and operations. The heart of the program is the piping simulation model, which continually updates as the system evolves. The model allows PIPE-FLO to reflect the operation accurately as new information becomes available and throughout the life of the facility. By integrating even tighter standards to the software and increasing the number of calculations and warning messages, it is easy to improve the accuracy of piping operation modeling.
Engineered Software Inc.
www.eng-software.com
More WaterWorld Current Issue Articles
More WaterWorld Archives Issue Articles