The Allied-Locke SS713P is a standard 6" pitch Collector Chain designed for greater corrosion resistance.
The Allied-Locke SS713P is a standard 6" pitch Collector Chain designed for greater corrosion resistance. The Passivated 304 stainless steel chain is ideal for the corrosive environments of primary and secondary clarification. With ultimate strength at 25,800 lbs., and maximum working load of 3,000 lbs., the chain is suitable for most longitudinal collector and cross collector tanks.
Allied-Locke Industries Inc.
Circle No. 216 on Reader Service Card
Bio-Systems Biobug AS is a granular bacteria product specifically manufactured for application in municipal treatment plants. Packaged in water soluble pouches for dosing, the concentrated formula rapidly establishes a biomass able to degrade organic material comprised of proteins, fats, carbohydrates, and select hydrocarbons. By improving the degradation of organic material, sludge levels are reduced as they are converted into dead "bugs" that weigh much less and occupy less space. Regular use of the product can result in 25 to 35% reduction in dry solids produced.
Circle No. 217 on Reader Service Card
GammaTech offers the D14RM rugged notebook that is tested using the Military 810G specification for drop and shock protection. To meet the needs of workers in the field, the laptop was designed with extra protection around the LCD and HDD to guard against accidental concussion and protection against liquid spills and dust. The notebook has all the necessary ports to allow for optimum connectivity and peripheral device usage. It includes multiple security features such as TPM 1.2 technology, finger print technology, and a smart card reader.
Circle No. 218 on Reader Service Card
Amiad Filtration Systems has added Ooval automatic diaphragm valves to its product lines in the U.S. and Canada. The valves are engineered for strength and weight savings, handling pressures up to 230 psi while using less material in their construction for reduced environmental footprint. Ooval manufactures a wide range of hydraulically and electrically operated automatic valves, including pressure reducing valves, pressure sustaining valves, pressure relief valves, remote control valves and many more.
Amiad Filtration Systems
Circle No. 219 on Reader Service Card
Caustic soda dosing
The new "CTS" Chemical Treatment System from Fluid Metering is suited for delivering caustic soda and other pH adjusting chemicals for treatment of water and wastewater. The metering pump uses a unique Valveless Piston Technology. A single rotating and reciprocating ceramic piston accomplishes both the pumping and valving functions, thereby eliminating the need for check valves and the associated maintenance. Sapphire-hard internal ceramics insure that there is no degradation in accuracy over time, and therefore, no need to recalibrate.
Fluid Metering, Inc.
Syosset , NY
Circle No. 220 on Reader Service Card
The Turner Designs C3 Submersible Fluorometer is now available with an Analog Output Adapter which outputs a 0-5 vDC signal for 1, 2, or 3 channels depending on the configuration. The adapter enables integration with CTDs or any dataloggers that accept a 0-5 vDC signal. It plugs directly into the meter and is held in place by the battery bracket. The C-Soft Windows-based user interface allows for intuitive C3 calibration, data logging, and data management.
Circle No. 221 on Reader Service Card
Emerson Process Management has introduced a new offering to its vortex flowmeter family, the Rosemount® 8800D CriticalProcess™ Vortex flowmeter, designed to increase plant availability and enhance overall safety. The flowmeter's vortex sensor is isolated from the process, making it possible to maintain the sensor without requiring a process shutdown. The system also has the ability to verify the health of the transmitter by simulating the vortex flow signal.
Emerson Process Management
Circle No. 222 on Reader Service Card
The SpillSafe™ Drum Scale from Force Flow monitors the amount of chemical used and the quantity remaining while also providing security against uncontained chemical spills. The system can detect a leak, provide early warning to the operator and complies with local regulations by containing 120% of the drum capacity. It can be used with the Wizard 4000® and SOLO G2® digital displays and is protected top to bottom by a 5-year warranty.
Circle No. 223 on Reader Service Card
Onsite septic chambers
The new Quick4 Plus Low Profile (LP) family of onsite septic chambers from Infiltrator Systems provides maximum strength in wastewater treatment applications via its patent-pending center structural column design. The chamber line includes three models: the Quick4 Plus Standard LP, the EQ36 LP, and the EQ36 StraightLock LP. At just eight inches tall, the low profile design is optimal for shallow installations where a high groundwater table, soils with low permeability, or other restrictions limit vertical separation distance.
Circle No. 224 on Reader Service Card
The WIKA Tronic LevelGuard attachment for submersible transmitters is designed for difficult level sensing applications where sludge, slurry or turbulence may be present. It is available with the LS-10, LH-10 high performance and IL-10 FM approved for intrinsically safe submersible level transmitters. The two-inch diaphragm provides excellent sensitivity and performance even when used to monitor extremely low liquid levels or when the assembly is buried in a layer of sludge or slurry.
WIKA Instrument Corp.
Circle No. 225 on Reader Service Card
The Waterpilot FMX21 level sensor from Endress+Hauser has a stainless steel housing and a flush-mounted process diaphragm, making it ideal for measuring the level of sludge and wastewater. With an optional Pt 100 sensor, it can also measure temperature. A corrosion-resistant, coated version is available for use in particularly aggressive environments, such as salt water. The sensor uses a ceramic cell to measure pressure.
Circle No. 226 on Reader Service Card
Municipal Solutions' Windows based Septage+ and Water+ System Administration Software allows utilities to monitor and control septage receiving and water dispensing stations. The applications compliment Asset Management Systems and interface to municipal accounting systems, eliminating duplicate data entry. The company can provide any range of systems from the basic Access Terminal & System Administration Software right up to a complete turn-key system.
Circle No. 227 on Reader Service Card
Ball valve actuator
Asahi/America has introduced the new Series 83A Electromni actuator for ball valves. The new Series 83A maintains the Series 83's original look while improving on its quality, design and performance. The new actuator remains compact and reliable with the same signature blue cover and gray base, however, it now boasts a NEMA 4X type enclosure. The flanged cover and baseplate design with a full gasket Nitrile seal enhances sealing performance.
Circle No. 228 on Reader Service Card
Assured Automation now offers the J Series Solenoid Valve for applications that require electrically operated valves. The valves feature a pilot assist design offering high flow rate with minimal pressure loss. These valves feature a spring return design that is Fail Open or Fail Close upon loss of electrical power. Cycle speed is fast, occurring in as little as 0.25 milliseconds in either direction. The pilot assist design only requires a 3 psi differential on either side of the valve.
Circle No. 230 on Reader Service Card
Best Controls, a manufacturer of controllers and control panels for pumping applications, has introduced the new Model PC 4000 Controller. It is a dedicated controller for pressure control applications using variable frequency drives (VFDs). Typical applications include municipal, industrial and commercial booster pump controls. The controller can be configured for 1-4 pumps, offers PID control and has a 0-200 psi pressure transmitter.
Circle No. 231 on Reader Service Card
Peristaltic metering pump
Blue-White has re-engineered the junction box and connectors on its Flex-Pro A3 Peristaltic Metering Pump. With the Flex-Pro A3s' newly engineered terminal block – complete with color-coded overlays - making connections is simplified. Plus, the new junction box provides extra working room. There are no loose wires. The new terminal block board, located within the junction box, uses 11 pluggable terminal blocks.
Huntington Beach, CA
Circle No. 229 on Reader Service Card
A new line of manway pressure and pressure/vacuum relief vents from Valve Concepts feature modular construction. The new VCI 8900 Series is available in both top-guided (spring-loaded) and hinged (weight-loaded) configurations. The emergency relief vents feature a standard, one-piece flange base with an integrated bolting pad to accommodate the hinged design. In addition, the modular design allows the valves to be converted from a pressure/vacuum vent to a pressure-only vent or vice versa.
Valve Concepts Inc.
Circle No. 232 on Reader Service Card
The VARIOspeed™ VFD from CSI Controls is designed specifically for pressure control applications. As the flow and head conditions change in the pumping system, the VFD is able to automatically control the pump speed and maintain a constant discharge pressure. The desired set pressure is set using the VFD keypad. The pressure transducer measures the pump discharge pressure. The VFD is available from 5-150 hp @ 208-240V and 5- 250 hp @380-480V, single phase or three phase supply voltage.
Circle No. 233 on Reader Service Card
Danfoss Drives has introduced the DrivePro-tection insurance program for its VLT® AQUA Variable Frequency Drives. The program covers the cost of damage from lightning strikes and other line anomalies, load anomalies, accidental exposure to moisture or corrosives, and accidental physical damage resulting from collision from the time of shipment from the Danfoss Drives factory. Coverage is available for new and installed drives for periods up through six years.
Circle No. 234 on Reader Service Card
The Models S10 and S17 Universal Toroidal Sensors from Electro-Chemical Devices can measure multiple individual liquid parameters for industrial process and manufacturing operations. The sensors can measure pH, ORP, DO, resistivity and conductivity. They feature a small diameter configuration that can easily fit into existing installations. The Model S10 is an immersion or insertion sensor, and the Model S17 is a valve retractable sensor. Both have a 0.75" diameter PVDF body, a universal diameter.
Circle No. 235 on Reader Service Card
Forsta has introduced a new line of low pressure automatic industrial water filters. The low pressure self-cleaning water filters range from 2"-30" with flow rates ranging from 15-20,000 gpm in a single filter housing . The Low Pressure Series point-of-suction backwash takes less than 16 seconds and uses less than 1% of the total flow per backwash without interrupting the main flow. Line pressure requirement for backwash can be low as 15 psi. The filters are available in stainless steel, carbon steel with epoxy coating or duplex stainless.
Los Angeles, CA
Circle No. 236 on Reader Service Card
The Super Shredder® in-line disintegrator reduces tough solids directly in sludge or raw sewage lines. Its design provides a high level of open area to fluid flow, allowing for high flows with minimal headloss. The unit features a patented "spherical shredding" mechanism that cuts and shears tough sludge and sewage solids into fine bits. The cutters are constructed of hard faced stainless steel. Because of the spherical rotor design, the shredder has far fewer moving parts and requires much less maintenance than units with banks of cutter disks.
Franklin Miller Inc.
Circle No. 239 on Reader Service Card
Water flow logger
The Water Flow Logger from Global Water is suited for flow data collection for applications such as inflow & infiltration studies, stormwater and wastewater collection systems, open channels, and a host of other gravity flow systems. Features include USB and Serial communication options; no confined space entry required for sensor deployment; programmable depth to flow conversion tables; and telemetry compatible.
Global Water Instrumentation
Gold River, CA
Circle No. 238 on Reader Service Card
Hermetic Switch, a designer and manufacturer of reed switches, proximity sensors, and other switch technologies, now offers a new series of liquid level sensors, also known as float sensors or fluid level sensors. The new PRX+1660 series is suited for use in liquid level monitoring applications in industrial, municipal, petrochemical, power generation, processing, and recreational markets. These sensors can be used for level sensing or monitoring of any fluid, limited only by the series' material of construction (polyamide or polypropylene).
Circle No. 237 on Reader Service Card