Pipe & Related Products

GF Piping Systems has introduced the chemically resistant PE100 Industrial Polyethylene Piping System offered in a complete range of pipe ...

Pennwell web 180 120

PE pipePennwell web 180 120

GF Piping Systems has introduced the chemically resistant PE100 Industrial Polyethylene Piping System offered in a complete range of pipe, fittings, valves and fusion joining technologies. The new system features robust mechanical strength and high impact resistance throughout a wide temperature range and is especially suited for cold temperature applications as low as -58ºF. GF Piping Systems, Tustin, CA, 800-854-4090, www.gfpiping.com

Sewer linerPennwell web 200 148

The T-Hab™ system from Ameron Protective Linings Division is a trenchless, large diameter sewer tunnel and pipeline rehabilitation process that uses the T-Lock PVC liner technology. The system can be used to rehabilitate either cylindrical or non-cylindrical tunnel and pipe configurations. T-Lock sheets are pre-manufactured to the required circumferential dimension and applied using a quick-curing, structural grout. Ameron Protective Linings Division, 936-321-1159, www.amerontlock.com

Pipe products

Underground Solutions provides infrastructure technologies for water and wastewater applications. Its PVC Pennwell web 200 72products, including Fusible C-900®, Fusible C-905® and FPVC®, contain a proprietary PVC formulation that, when combined with UGSI’s patented fusion process, results in a monolithic, fully restrained, gasket-free, leak-free piping system ideal for numerous trenchless or conventional “open-cut” applications including horizontal directional drill (HDD), pipe bursting, sliplining and open trench. Underground Solutions Inc., Cranberry Township, PA, 724-353-3000, www.undergroundsolutions.com

Non-metallic pipe

Non-metallic construction gives Hobas centrifugally cast, fiberglass reinforced, polymer mortar pipe inherent corrosion resistance without linings or coatings. It is widely used in both new construction and rehab for corrosive environments such as industrial effluents, contaminated drainage and foul air. It is also used for cooling and circulating water lines and is approved for potable water. The pipe is light weight, has high strength, and uses push together joints. It is ideal for a variety of installation methods including open cut, sliplining, jacking, microtunneling, two-pass tunnel, casing carrier and above ground. Hobas Pipe USA, Houston, TX, 800-856-7473, www.hobaspipe.comPennwell web 130 166

Pipe inspection system

The PipeDiver™ pipeline inspection system has been specifically designed to operate in live pipelines, guaranteeing uptime and avoiding dewatering and service shutdown. This free-swimming tool travels long distances and collects critical data about the structural integrity of the pipeline, identifying pipe sections that are at risk of failure.Pressure Pipe Inspection Co., Mississauga, ON, 877-275-7742, www.ppic.com

Lateral inspection cameraPennwell web 140 191

The Ridgid® SeeSnake microReel L100 and L100C inspection system is a compact, portable drain inspection system for users needing to push cable distances of up to 100 feet in lines from 1 ½” to 4” in diameter. Designed for use in lateral lines that exit the building and connect to septic or sewer lines, as well as in roof stacks, the inspection system features a 100-foot cable and a 25-mm camera head. The push cable is designed to be stiff enough to reach longer distances, yet flexible enough to allow access through bends in the lines. An optional counter provides the ability to count the number of feet and inches the cable is extended. Ridgid, Elyria, OH, 800-769-7743, www.ridgid.com

Pipe supportsPennwell web 180 132

Pipe supports by Reliner® are fully adjustable clamping pipe brackets made of non-corrosive 11 gauge 304 stainless. They securely attach pipes to manhole walls and other surfaces with no protruding hardware and are adjustable to fit irregular surfaces. They are often used with the company’s Inside Drop Bowl to eliminate outside drops in sanitary sewers or stormwater drops. The clamps attach to the structure wall with 3/8” stainless steel bolts in non-corrosive shields. A wide range of clamp sizes are in stock: 1.5” – 30” for SDR 35, Schedule 40, C900, CIOD, HDPE, DN, etc., along with custom clamps. Reliner®/ Duran Inc., Lyme, CT, 800-508-6001, www.reliner.com

Joint restraintsPennwell web 175 142

Smith-Blair has announced the addition of the Pipe-Lock to its Joint Restraint product line. The fabricated steel sleeve restraint coupling can be used to connect and restrain plain end pipe to plain end pipe. Its restrained joint requires no other method of restraining the pipe. It is available in straight, transition and reducing couplings in sizes 3”-36” for PVC and 3”-48” for ductile iron. Smith-Blair, Texarkana, AR, 800-643-9705, www.smith-blair.com

PVC sewer pipePennwell web 175 159

CertainTeed has expanded its CertaFlo™ GreenLine PVC Sewer Pipe line to include larger diameters. The pipe is now available in diameters ranging from 4” to 12”. The high-impact polyvinyl chloride (PVC) pipe features the company’s Certa-Lok™ Integral Bell restrained joint system. It is available in 10- and 20-foot lengths for ease of use in trenchless applications, such as directional drilling and pipebursting. The shorter lengths facilitate rapid assembly and allow the use of smaller and more economical construction pit sizes. The pipe’s code-approved light-green color makes camera inspection of sewers easier. CertainTeed Corp., Valley Forge, PA, 866-284-7473, www.certainteed.com

Fiberglass reinforced pipe

Flowtite® fiberglass reinforced pressure pipe offers a smooth internal surface with improved hydraulic characteristics. The filament wound fibers used in the continuous advancing manufacturing process provide a true pressure pipe design with superior hoop strength. This process also allows the production of custom length pipe to reduce transportation and installation costs. The pipe is available in diameters up to 156”, and pressure ranges up to 250 psi (higher pressures in certain diameters). The pipe is not affected by UV exposure and demonstrates minimal thermal expansion/contraction. U.S. Composite Pipe South, LLC, Zachary, LA, 225-658-6166, www.uscpsouth.com

Pipe burstingPennwell web 200 113

Facilities can burst and replace water and sewer pipes with the Grundoburst static pipe bursting system from TT Technologies. The system can pull in a variety of replacement pipe including PVC, DIP, ABS, cast iron, fusion welded HDPE and VCP jacking pipe. Pulled by a hydraulic bursting unit, the cutter head’s special cutting wheels split the host pipe. Six models are available for bursting 2” through 54” pipes and larger. TT Technologies, Aurora, IL, 630-851-8200, www.tttechnologies.com

Pipe mapping system

The Smart Probe™ from Geospatial Corp. is an autonomous mapping system that can determine, in 3D, the location of any utility pipe with internal diameters ranging from 1.5” to 60”. Traveling through a pipeline at up to six feet per second, the probe records 800 angular and linear velocity changes per second along the x, y and z axes. The data acquired by the probe can be stored on a PC or viewed and evaluated in the field, or can be transferred via the Internet for evaluation by anyone, or stored and entered into a GIS/CAD database for future reference. The probe can be used for water pipelines, gravity sewers, pressure sewers, conduits, and most industrial pipelines. Geospatial Corp., 724-353-3400, www.geospatialcorporation.com

Corrugated PE pipePennwell web 150 190

JM Eagle had introduced the Eagle Corr PE (Dual Wall) pipe. Combining a corrugated exterior and a smooth interior for maximum hydraulic efficiency in a high-density polyethylene pipe, it can be used in a variety of gravity flow applications and is especially suited for storm sewer systems. The pipe has a high strength-to-weight ratio, is very flexible and weighs less than traditional products. It can support a load rating of H-25 – with a minimum cover of only 1 foot – but with a conduit design that’s also flexible enough to allow for cover heights in excess of 100 feet. JM Eagle, Los Angeles, CA, www.jmeagle.com

Casing end seal

PSI-Pipeline Seal & Insulator has introduced the Model R Casing End Seal, for sealing the ends of cased Pennwell web 170 125pipes or containment pipes. It is the first adjustable and stockable casing end seal. The molded EPDM end seal is available in five model sizes; these sizes accommodate various casing pipe O.D. to carrier pipe O.D. applications. The largest one is sized for a casing pipe OD of either 20” or 24” and can accommodate all carrier pipe sizes from 6” and larger. The tapered cone shape allows user to cut-to-fit in the field or use as a night cap, before carrier pipe installation. Pipeline Seal & Insulator Inc., Houston, TX, 800-423-2410, www.pipelineseal.com

Pipe inspectionPennwell web 200 133

The robotic RedZone Solo pipe inspection system does not require on-site trucks, generators, or personnel -- resulting in increased safety, emissions reductions, elimination of easement access challenges, and minimal public disruption. One person can operate four robots after a day’s training, with significant increases in throughput compared to conventional CCTV. This new addition complements the flagship Responder large diameter pipe inspection system and RedZone’s GIS tools. RedZone Robotics Inc., Pittsburgh, PA, 412-476-8980, www.redzone.com

Expansion jointsPennwell web 200 112

The Force Balanced Flex-Tend® Flexible Expansion Joint from EBAA Iron can accommodate pressure-induced thrust forces. It uses an additional water chamber piston that acts in the equal and opposite direction of the imparting thrust and neutralizes the thrust forces. This allows designers to use flexible expansion joints in applications where thrust blocks or other force-restricting devices are not applicable. Force balanced joints also protect pipelines that serve structures from shear. EBAA Iron Inc., Eastland, TX, 800-433-1716 , www.ebaa.com

Restrained joint pipePennwell web 180 128

The Horizontal Directional Drilling (HDD) pipeline installation method is becoming more common in the water industry. U.S. Pipe’s TR Flex® Restrained Joint pipe is approved for use in applications using HDD. It provides easy assembly and positive thrust restraint, and withstands the unique rigors and demands of HDD. U.S. Pipe and Foundry Co., Birmingham, AL, 866-347-7473, www.uspipe.com

Leak detectionPennwell web 200 150

SmartBall is an autonomous in-line leak detection and condition assessment system from Pure Technologies. The free swimming, non-tethered foam ball with an instrumented aluminum core is capable of detecting acoustic activity associated with leaks and pockets of trapped gas in pressurized pipelines. The ball is inserted into a pipeline and travels with the water flow for up to 12 hours. The company also offers robotic pipeline inspection services. Pure Technologies, Columbia, MD, 800-537-2806, www.puretechnologiesltd.com

More Industrial WaterWorld Articles
More in Home