Wastewater treatment system pilot project complete, exceeds expectations

Feb. 16, 2009
Neohydro Technologies Corp. announced that after over a month of extensive real-world operations in a Utah evaporation plant, Neohydro's new wastewater treatment technology provided local oil and gas operators and wastewater disposal companies with results that exceeded their highest lab-projected expectations...

HOUSTON, TX, Feb. 11, 2009 -- Neohydro Technologies Corp. is pleased to announce that after over a month of extensive real-world operations in a Utah evaporation plant, Neohydro's new wastewater treatment technology astounded local oil and gas operators and wastewater disposal companies with results that exceeded their highest lab-projected expectations.

Neohydro Technologies Corp. announced the successful results of their pilot project. "This is huge for us," says Neohydro Technologies Corp. CEO Dean Themy. "We've had promising results in the lab, but everyone needed to know the system would hold up under real-world conditions for extended amounts of time. It has! Now all the clients that were waiting in the wings are scrambling to enter into service agreements."

The pilot project, co-sponsored by ITL (Iowa Tank Lines Inc.) and their wastewater subsidiary Water Recovery LLC in Duchesne, Utah, proved how effectively a single-cell Neohydro unit, with moderate power supply requirements, and no additional chemicals, can serve a large wastewater disposal company. Neohydro's single-cell unit treated a continuous stream of 2,300 barrels of wastewater in a 24-hour period -- more than doubling their lab-projected 1,000 barrel-capacity expectations. The lab results showed that the high voltage electrodes removed metals, oils, hydrocarbons, BOD's and COD's enough to enable the re-use of the water in the frac process in accordance with EPA standards. These findings will probably make Neohydro's technology the least expensive single-flow mobile wastewater treatment solution available to the oil and gas industry today.

Dean Themy states, "We decided that a second Pilot Project was necessary as we thought it would be advantageous to fill a niche with a new product that would compliment the Rover™. One that was semi-permanent and dealt with wastewater that was disposed off-site and did not deal with the wastewater at the well site. So we created a new "stationary" unit called the NeoH™.

"While we're excited about opening up a new market with wastewater treatment companies, we cannot forget about the people who are most excited about the results -- the well operators," continues Dean. Why?

Neohydro's technology employs electro-oxidation to destroy BOD and COD contaminants and electro-coagulation to separate metals, oils, hydrocarbons, gases and water. The resulting water is chemically sound enough for reuse in a number of processes, including reinjection in fracing operations. "Our mobile units can basically drive up to any well site with an onsite pit of wastewater and instantly turn that liability into an asset…an asset that generates continuous return at a fraction of the cost of current methods and without any harmful effects to the environment," states Themy.

After the proof-positive results, Neohydro eagerly anticipates that it will be able to complete a mutually beneficial agreement with ITL (Iowa Tank Lines Inc.) and its wholly owned subsidiary, Water Recovery LLC. Meanwhile, Neohydro's mobile test unit, the Rover™ is already on its way to a series of scheduled demonstrations at several well sites in the Utah area before moving on to other potential sites in the US and Canadian Rocky Mountain regions.

###

Sponsored Recommendations

ArmorBlock 5000: Boost Automation Efficiency

April 25, 2024
Discover the transformative benefits of leveraging a scalable On-Machine I/O to improve flexibility, enhance reliability and streamline operations.

Rising Cyber Threats and the Impact on Risk and Resiliency Operations

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...

State of Smart Manufacturing Report Series

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...

SmartSights WIN-911 Alarm Notification Software Enables Faster Response

March 15, 2024
Alarm notification software enables faster response for customers, keeping production on track