Pumps, Motors & Drives

PSG's Maag Industrial Pumps has introduced its S Series line of twin screw pumps.

Maag S Series

Twin screw pumpsMaag S Series

PSG's Maag Industrial Pumps has introduced its S Series line of twin screw pumps. The pumps are part of Maag's newly-created Industrial Pumps platform, featuring both external and internal gear pump technologies. Its S Series pumps are ATEX-certified for use in explosive or dangerous environments and address the difficult pumping challenges found in the oil & gas, process and marine industries. The pumps will be able to provide solutions that can meet the toughest application challenges regardless of temperature, viscosity or pressure. Maag, Pump Solutions Groupwww.maag.com


Drive unitsDriveindustrial1

Clarifier and thickener drive units provide the rotational force necessary to turn the rake arms in a circular basin. The rotating rake arms transport settled solids to the center of the tank for removal. Because drive units are applied in water and wastewater treatment plants as well as industrial facilities, WesTech has developed a premium drive unit for each application. WesTech drive units can be designed for torque requirements from 1,000 ft-lbs to 6,000,000 ft-lbs. WesTech drive units are delivered to the job site as a single, completely assembled and shop-tested unit, ready to be installed on the thickener or clarifier center column. WesTech Inc.www.westech-inc.com


Thermoplastic pumpsHayward Plat Gfpp Sb Series

Hayward Flow Control has released its new T-Series Webster thermoplastic pumps. These vertical, seal-less, immersible pumps feature a single, non-coupled motor/impeller shaft with a proprietary patent-pending shaft seal. The pumps are available from 1/3 hp to 1 1/2 hp with standard and wash-down motors and in voltages of 115/230 and 208-230/460. Key features include CPVC pump head and impeller, 303 SS shaft material and an extended shaft sleeve. Options include GFPP or PVDF pump head and impeller assembly, inlet screen, in-tank filtration, impeller trim variations, explosion-proof motors, 575 V motors, and S-J type electrical cord. Hayward Flow Controlwww.haywardflowcontrol.com


Hitachi motorHitachi

Hitachi Motors from Pentair are designed for long service life and years of dependable operation. Combined with exceptional insulation and a proven epoxy fill resin, these motors exceed NEMA requirements. Designed with internal lubrication and cooling blend of water, antifreeze and an antirust mixture, Hitachi submersible motors are unique in providing the industry with innovative and robust design features that will extend the serviceable life of your installation. Key features include a corrosion-resistant design, VFD compatibility, a replaceable plug-in motor lead, and dual voltage type. Pentair Inc. www.pumps.com


Electrical motors, drivesBaldor

Baldor-Reliance® motors range from 1/50th through 15,000 horsepower and the company sells and supports the entire line of ABB IEC motors and medium voltage motors up to 100,000 horsepower. Baldor's Super-E® motors are optimized for efficiency, ensuring the lowest operating costs for the customer. The company also offers broad lines of brake-motors, explosion-proof, C-face, pump-motors and gear-motors to provide solutions for any purpose or environment. Baldor and ABB industrial adjustable speed drives include AC inverters and vector controls, DC SCR controls, servos and positioning products. Baldor Electric Co.www.baldor.com


Plastic AODD pumpsWilden

Wilden announced that its Advanced™ Series Plastic Air-Operated Double-Diaphragm (AODD) Pumps protect chemical operators against dangerous acids used in the manufacture of pharmaceuticals, paint and coatings, soap and detergents, pulp and paper, plastics, and rubber and petroleum. The pumps are available in 6 mm to 76 mm (1/4" to 3") sizes with the ability to handle solids up to 12.7 mm (1/2"). Maximum flow rates are 784 L/min (207 gpm). They also feature the innovative Pro-Flo X™ air distribution system (ADS) with state-of-the-art Efficiency Management System (EMS™), which allows the operator to dial in the actual operational parameters regardless of the application demands or pump size. The pumps come in polypropylene, PVDF and PFA with elastomers of Buna-N®, Neoprene, EPDM, Viton®, Wil-Flex™, Saniflex™, polyurethane and PTFE. Wilden Pump & Engineering www.wildenpump.com

More Industrial WaterWorld Articles
Past IWW Issues

More in Industrial