Turnkey Project Brings Piped Drinking Water to 300,000 People

The turnkey project was designed to provide a complete system from "catchment to consumer," with all design, construction and commissioning the responsibility of one company.

Pennwell web 400 267

By Andrew Walker

More than 300,000 people in a remote district of Sri Lanka are today enjoying quality drinking water due to a turnkey project undertaken by Outotec for Sri Lanka's National Water Supply and Drainage Board (NWS&DB).

Pennwell web 400 267
Raw water fed to the treatment plant is extracted from an irrigation reservoir.

The project, built between 1999-2007 in the Ampara district, 350km from the capital Colombo, is comfortably coping with harsh local conditions, including unreliable power supply, limited maintenance, large seasonal raw water quality variations and fluctuations in demand.

"After more than two years from Phase II commissioning, the treatment plant is continuing to provide good quality water to consumers, within design targets, 24/7," said Outotec Project Director Steve Giffin, based in Sri Lanka.

The project – which NWS&DB plans to follow with another covering a further 350,000 people – is a source of satisfaction to Outotec, which undertakes turnkey projects throughout Asia and Australasia.

The Ampara district on the east coast of Sri Lanka is one of the least developed areas in the country, being semi-rural, affected by civil war and disturbance, with the completion of large-scale projects presenting a significant challenge.

In 1997, Sri Lanka's National Water Supply and Drainage Board launched a program to provide a large population of previously unserved communities with quality piped drinking water under the ECTAD (Eastern Coastal Towns of Ampara District) project.

Outotec was awarded the initial and subsequent phase of this project, carried out from 1999 to 2007. As the complete turnkey supplier, Outotec was tasked with the design, construction and commissioning of a water supply scheme, which was to provide piped water to 300,000 people in the Ampara District for the first time.

The NWS&DB is the principal government authority for the nation of Sri Lanka responsible for providing safe drinking water and sanitation for the population. A workforce of about 8,000 is employed nationwide.

Ampara District

The Ampara district is on the east coast of Sri Lanka, population circa 611,000, with a tropical climate and a long dry season. The district is rural and primarily agricultural, relying on a large irrigation network of reservoirs and canals for rice paddy farming.

However, there are water quality and scarcity issues with the traditional water sources due to intensive farming and resultant fertilizer, soil and chemical run-off. In the densely populated coastal towns, limited land availability has resulted in some septic sanitation systems being installed very close to drinking water wells, with contamination common.

With a growing population, the need for pipe borne safe water has never been greater in Ampara.

Project Scope

Working closely with NWS&DB, Outotec's resulting solution was challenging but achievable.

The project structure was turnkey "catchment to consumer", meaning that all design, construction and commissioning from the raw water reservoir all the way to the distribution networks at town street level, was under the direct responsibility of Outotec. Outotec was the head contractor, working closely with process designers and equipment suppliers, and hand-in-hand with local Sri Lankan partners.

The combined Phase I and II project scope included raw water intake structure, a 15.86 mgd (72 ML/day) DAF filtration treatment plant including all chemical dosing and residuals handling, clearwater storage, transmission mains, five booster pump stations each with 1600 m3 capacity, nine elevated storage towers of 1125 m3 or 1600 m3 capacity, and nine distribution networks, covering a total project area of approximately 500 km2.

Remote Location

The Ampara District location, 350 km from the capital Colombo, created difficulties. An undeveloped region, poor in infrastructure, with limited available technology and little local skilled/semi-skilled labor, the region's recent history of civil unrest and difficulty in attracting outside contractors had its own unique set of challenges, requiring patience, flexibility and strong management.

Coordination

Project management was an extremely complex task due to the magnitude of the project, interaction between the various cultures on the job, language barriers and geographic distance between involved parties. Mechanical and process design was carried out in Australia, civil and electrical design and detailing in Sri Lanka, with significant participation from NSW&DB. An office of expat and local personnel was established in Sri Lanka to manage the various project phases, providing project management, drafting and engineering personnel. Equipment was sourced from vendors in Asia, Europe, USA and Australia.

Pennwell web 400 260
The combined Phase I and II project scope included raw water intake structure, and a 15.86 mgd (72 ML/day) DAF filtration treatment plant including all chemical dosing and residuals handling.

At its peak, up to 1200 workers were involved in the construction process across as many as 20 sites. The project was completed in a timeframe seldom achieved in Sri Lanka.

Sri Lankan Firsts

As a result of Outotec undertaking these two project phases, the Ampara District has witnessed the implementation of some "technological firsts" in Sri Lanka, which include:

1. Water pretreatment through DAF (dissolved air flotation) before filtration - DAF is an internationally favored process for algae affected waters, replacing conventional sedimentation

2. PAC (powdered activated carbon) systems to combat taste and odor – to remove seasonal non-toxic algal taste and odor compounds, as well as adsorption of potential algal toxins

3. Decanter centrifuges for thickener sludge de-watering – to produce a solid transportable cake for offsite disposal

4. Self-lift slip formwork for tower shaft construction – to improve quality, safety and reduce construction times, compared to scaffolding and external crane methods

As a result of Outotec's successful implementation of these technological firsts, other installations in Sri Lanka have begun to adopt some of the same solutions.

Treatment Process

Raw water fed to the treatment plant is extracted from an irrigation reservoir. The treatment process involves pre-chlorination, followed by coagulant addition, taste and odor control, flash mixing, mechanical flocculation, dissolved air flotation (DAF) over monomedia sand filters, post-chlorine disinfection, lime pH correction and clearwater storage. Plant residuals handling comprises of thickening with flocculant dosing, thickener sludge storage, and decanter centrifugation.

The Future

After more than two years from Phase II commissioning, the treatment plant is still providing good quality water to consumers, within the design targets. The system is comfortably coping with the harsh local conditions, including unreliable power supply, limited maintenance, large seasonal raw water quality variations and fluctuations in demand.

With ECTAD Phase I and II successfully completed by Outotec, a further project expansion is planned by NSW&DB. This expansion will cover up to 350,000 people in the inland unserved areas of the Ampara District, bringing the total coverage of the district to 611,000 people by 2020. Completion of the extension would make the overall ECTAD scheme one of the largest rural water supply schemes in Sri Lanka.

More Water & WasteWater International Current Issue Articles
More Water & WasteWater International Archives Issue Articles

More in Desalination
Wastewater treatment 4.0
Sponsored
Wastewater treatment 4.0