Products & Services- Lab, Sampling

Collection of Lab, Sampling products and services.

Jan 1st, 2013
Andalyze And1000 1301ww

Water testing

ANDalyze offers a one minute test for heavy metals measuring down to 1 ppb detection levels in drinking water, environmental water, salt water, industrial process water and treated wastewater. The company's products are designed for testing water contamination such as trace metals using the new method of catalytic DNA technologies which has been proven to be faster, cheaper and easier to use than competing technologies.

ANDalyze
www.andalyze.com


Phosphate test kit

CHEMetrics' new Total Phosphate Test Kit, with screw cap vials, uses the ascorbic acid method and measures those forms of phosphate that are converted to orthophosphate during an acid oxidation digestion. Users can perform digestion and measurement in the same vial. They can use CHEMetrics' V-2000 photometer for direct readout in ppm or any spectrophotometer capable of accepting a 16 mm diameter cell.

CHEMetrics
www.chemetrics.com


Coliform testing

The PolyScience Coliform Bath is specially designed for fecal coliform and E. coli testing. It features an ambient +10° to 135°C temperature range, ±0.7°C temperature stability, 28 liter reservoir, and is equipped with the company's economical MX temperature controller. Suitable for AWWA, WEF and EPA fecal coliform determinations as well as other standard coliform and E.coli tests, the Coliform Bath is equipped with a hinged see-through gable cover, single speed pump, user-adjustable temperature alarms, calibration capability, and chemical resistant top plate. Its intuitive MX controller makes temperature and operational changes particularly simple and straightforward.

PolyScience
www.polyscience.com


Water, gas monitoring

The INFICON CMS5000 Monitoring System provides continuous, unattended remote monitoring of water or air. Using GC (gas chromatograph) technology, it analyzes and quantifies Volatile Organic Compounds (VOCs) and Toxic Industrial Chemicals (TICs) on-site for accurate results in minutes. The analytical data is representative of actual water conditions at the time of sampling, providing the answers needed to make fast decisions about potentially critical issues.

INFICON
www.inficon.com


Water quality monitoring

Sper Scientific has introduced a new line of waterproof and shockproof water quality meters that are rechargeable, and float if dropped in water. The handheld meter line, called AquaShock™, is the first IP67 waterproof meter line to feature replaceable BNC-connected probes. The meters feature a screw-down, waterproof housing surrounding the BNC probe connection.

Sper Scientific
www.sperdirect.com


Colorimetric analyzer

The AMI Codes-II CC from Swan Analytical is a colorimetric process analyzer for measurement and dosing control of disinfectants such as free chlorine, monochloramine, total residual chlorine and combined chlorine. For the continuous online determination of disinfectants based on the DPD colorimetric method. The complete system includes measurement and control electronics, photometer, flow indicator, reaction chamber, reagent dosing system and reagent containers.

Swan Analytical USA
www.swan-analytical-usa.com


Hormone detection

Thermo Scientific Hormones Application Kit is a complete package designed to simplify the detection and analysis of hormone contaminants in ground water and drinking water samples using liquid chromatography/tandem mass spectrometry (LC-MS/MS). The application kit is designed to streamline and accelerate sample preparation, handling and analysis using a verified protocol for EPA Method 539, "Determination of Hormones in Drinking Water by Solid Phase Extraction (SPE) and Liquid Chromatography Electrospray Ionization Tandem Mass Spectrometry (LC-ESI-MS/MS)."

Thermo Fisher Scientific Inc.
www.thermoscientific.com


Laboratory testing

WesTech offers complete laboratory testing facilities to assist in project planning. The company's laboratory technicians are specialists in filtration, sedimentation, and flotation. Careful testing and analysis of a sample can provide the answers to most difficult process problems, helping to establish design parameters and size equipment based upon bench scale testing results. Comprehensive reports are sent to the customer and the information is then used to discuss the most effective water or wastewater treatment options. Bench scale units are also available for rental or purchase for use at a testing facility.

WesTech Inc.
www.westech-inc.com


Water quality monitoring

Water utilities can monitor and track the health of their source water before it reaches the treatment plant with YSI's EXO water-quality monitoring sondes and real-time alerts. Users can configure sondes quickly to move between laboratory and field sites, switching sensors as needed for the different parameters of interest at different sites. Sensors have fast response times for profiling and sampling, and a depth rating of 250 meters for long-term continuous monitoring in drinking water reservoirs and near intake structures.

YSI, a Xylem brand
www.exowater.com


Fluorimeter

The new HF scientific HF-38 Fluorimeter is an extremely sensitive, hand-held, ruggedized instrument designed for field testing of toxic heavy metal contaminates in water supplies. It requires no special skill or knowledge of chemistry to operate. Through the use of DNA sensors, a reaction that fluoresces in the presence of a target contaminate substance, such as lead, is measured to determine the concentration of the target heavy metal and is reported in parts per billion (ppb).

HF scientific
www.hfscientific.com


Sludge sampling

The AMS Multi-Stage Sampler (MSS) is an ideal choice for collecting samples up to four feet in thickness. The sampler has four stainless steel 12" sampler body sections (a base section and three sampler body extension sections) to allow field personnel to make a sampler to the length that is needed. The kit comes with three four-foot stainless steel extensions that allow users to deploy the sampler through 12 feet of water before reaching the sediment. Dredges may also be used to collect samples from the upper/top 4 inches of the sludge.

AMS Inc.
www.ams-samplers.com


Sensors, analyzers

Liquid Analytical Resource had introduced the Chemitec line of sensors and analyzers. The company's measurement parameters already included TOC, COD, BOD, total nitrogen, ammonia, toxicity, conductivity, dissolved oxygen, pH, ORP, turbidity, suspended solids and respiration. The new line expands client's choices for pH/ORP, conductivity, turbidity and suspended solids. In addition, the new line allows for monitoring of peracetic acid as well as disinfectants such as chlorine, ozone and chlorine dioxide.

Liquid Analytical Resource, LLC
www.larllc.com


Multiparameter analyzer

The Rosemount Analytical 1056 intelligent analyzer from Emerson Process Management is a flexible multiparameter analyzer for a wide range of industrial and municipal applications. Offering single- or dual-sensor input with an unrestricted choice of dual measurements, it measures turbidity; flow; pH/ORP/ISE; resistivity/conductivity; percent concentration; chlorine; oxygen; ozone; and temperature. The Model 1056 features a high-contrast LCD display; advanced measurement diagnostics; simple, intuitive menus and help-screens; and user menus in seven languages. Set up is simplified with Quick-start screens.

Emerson Process Management,

Rosemount Analytical Inc.
www.rosemountanalytical.com

More in Utilities