California lead content requirements for plumbing products take effect in 2010

New lead content requirements for plumbing products have been added to California's Health & Safety Code (Section 116875; commonly known as AB1953), which goes into effect January 1, 2010...

• Sponsor of AB1953 supports NSF/ANSI Standard 61, Annex G

ANN ARBOR, MI, Apr. 28, 2009 -- New lead content requirements for plumbing products have been added to California's Health & Safety Code (Section 116875; commonly known as AB1953), which goes into effect January 1, 2010. After this date, any pipe, fitting, or fixture intended to convey or dispense water for human consumption through drinking or cooking must meet a weighted average lead content of <0.25%. The requirement of this law was incorporated as an annex into the American National Standard for health effects of drinking water system components: NSF/ANSI Standard 61.

Recently, however, there have been misleading statements from some industry sources indicating NSF 61, Annex G does not provide for compliance with the requirements of AB1953.

East Bay Municipal Utility District (EBMUD), which provides water to over 1.3 million residents in the eastern San Francisco Bay Area, was one of the original sponsors of AB1953. Representatives from EBMUD worked with other utilities, regulators, plumbing industry and product manufacturing representatives to develop NSF 61, Annex G.

Richard Sykes, Manager of Natural Resources, EBMUD said: "Annex G of NSF/ANSI 61 - 2008 was developed with input from California's Department of Public Health and California's East Bay Municipal Utility District and establishes a conservative protocol to determine product compliance with the 0.25% maximum weighted average lead content requirement of California Health & Safety Code (Section 116875). The DPH has stated to us (EBMUD) that compliance with Annex G ensures compliance with this requirement."

Richard Sykes explains: "I made the request to the NSF Drinking Water Additives Joint Committee with oversight of the standard to include the annex to allow manufacturers the option of being certified to California's reduced lead content requirement. The annex was developed with input from stakeholders in California and care was taken to assure full compatibility with the law. The adoption of Annex G last December fulfills the request made by the Joint Committee."

The NSF 61 committee is currently conducting a series of round robin testing with manufacturers, product certification organizations and the California Department of Toxic Substances to validate a referee analysis method for alloy lead content when testing of materials is required. When completed, the method will be incorporated into the standard.

The annex was developed to establish an American National Standard to determine product compliance with the <0.25 percent maximum weighted average lead content requirement of the California Health & Safety Code, as well as a standard for other states to reference if they are developing similar regulations. A similar law has been enacted in Vermont and is scheduled to take effect January 1, 2010.

Although the California law does not go into effect for several months, NSF is presently certifying products to NSF 61, Annex G. Certified products will bear the above marks signifying compliance with the standard and the new California requirement.

Over 1,650 products have been certified by NSF to meet Annex G requirements. To view NSF/ANSI Standard 61 Annex G certified drinking water system components, visit NSF's Standard 61 Certified Listings. To view NSF/ANSI Standard 14 Annex G certified plumbing products, visit NSF's Standard 14 Certified Listings. NSF will also be testing these products on an ongoing basis to verify that they continue to comply with the mandated lead content restrictions.

For more information on Annex G and NSF/ANSI Standard 61, visit NSF's Web site. For more information on NSF/ANSI Standard 61 requirements or NSF testing and certification services to the standard, contact Pete Greiner at 734.769.5517 or greinerp@nsf.org.

NSF International, an independent, not-for-profit organization, helps protect you by certifying products and writing standards for food, water and consumer goods.

Related Articles
>>NSF announces new standards for lead
>>NSF develops standard for low lead plumbing products
>>NSF offers certification for low lead plumbing products
>>UL readies for California Assembly Bill 1953
>>Current version of the California Waterworks Standards
>>Frequently asked questions on NSF/ANSI Standard 61

###

More in Drinking Water