Berson UV disinfection technology saves money for Cambridge Water
LONDON, UK, June 8, 2009 -- Cambridge Water plc in the UK has recently installed three Berson InLine+ DVGW-validated medium pressure UV disinfection units at its remote Euston Pumping Station...
LONDON, UK, June 8, 2009 -- Cambridge Water plc in the United Kingdom has recently installed three Berson InLine+ DVGW*-validated medium pressure UV disinfection units at its remote Euston Pumping Station. Between them the three units treat up to 724m³/hour of water, which is then delivered via a 55km delivery main to storage reservoirs that serve the city of Cambridge.
|Three Berson InLine+ UV disinfection chambers installed at Cambridge Water's Euston Pumping Station. The units are controlled by a UV-Tronic+ V5 PLC controller.|
Older versions of the UV-Tronic already had the capacity to control multiple streams and treatment chambers, a feature that is particularly useful where a treatment plant has variable water parameters such as flow or transmittance, as it allows shutdown of individual UV chambers when not required, reducing power consumption.
The new UV-Tronic+ V5 has enhanced features which makes it possible to individually control the power level of up to six chambers simultaneously to suit the flow conditions for each stream, further minimizing power consumption. Additional new features include greatly extended monitoring and control via Modbus, increased manual control functionality to ease maintenance and servicing, and the capacity to individually calibrate UV sensors when running in DVGW mode. A built-in modem can also be used to provide remote monitoring and diagnosis and for software upgrades.
In addition, when UV monitors on the inner wall of the UV chamber register a fall in the UV level, the controller is designed to trigger automatic wipers on the quartz sleeves protecting the UV lamps. The wipers remove any built-up deposits on the sleeves, ensuring uninterrupted protection against microbial contamination. An additional benefit of automated wiping means no chemicals are required for cleaning, an especially important feature when it comes to drinking water disinfection.
"The UV-Tronic+ V5 is a very useful feature of the Berson UV system," commented Bob Clifforde, Cambridge Water's Electrical Engineer. "By allowing us to control each UV chamber individually it not only greatly simplifies operations but has also reduced our operating costs."
Providing primary disinfection followed by marginal chlorination using hypochlorite, the UV system was installed as an alternative to chlorine-only disinfection. "We selected UV for this remote location as it is so much more convenient than transporting chlorine from our Cambridge depot, over 50km away. There are savings too over the cost of buying and transporting the chlorine gas," added Bob.
Berson UV is one of the few non-German UV system suppliers capable of providing a complete range of UV systems with capacities between 10 -- 10,000 m³/hour, certified to the newest German DVGW norm, W294, Part 1, 2 & 3 -- the highest standard currently possible in the world. The systems are also fully validated in accordance with the USEPA UV Disinfection Guidance Manual (UVDGM), which certifies the use of the systems for the Long Term 2 Enhanced Surface Water Treatment Rule (LT2ESWTR) released by EPA in November 2006.
Based in the Netherlands, Berson is a world leader in closed-vessel, medium pressure UV disinfection technology for drinking water and wastewater applications, with installations across the globe, from the USA to Australia. Along with fellow UV companies Hanovia Limited in the UK and Aquionics Inc in the USA, Berson is part of the Fluid Technology Division of Halma p.l.c.
* DVGW (German Technical and Scientific Association for Gas and Water) is the body responsible for industry self-regulation in the German water and gas and water supply industry and its technical rules are the basis for safety and reliability.