Products & Services
Chemical meteringWatson-Marlow has introduced its new Qdos 30 pump range. The chemical metering system eliminates ancillary equipment, enhances productivity, and reduces chemical waste through more accurate, linear, and repeatable metering than typical solenoid or stepper driven diaphragm metering pumps. The pumps deliver 5,000:1 flow from 0.002 to 8.0 gph at 100 psi while integrating easily through IP66 manual, analog, and PROFIBUS control options. Featuring patented ReNu pumphead technology, the pumps are fully sealed for safe, tool-free maintenance. Watson-Marlow Pumps Groupwww.wmpg.com
Bredel has introduced its new APEX range, an optimized pump designed to suit all dosing, metering and transfer duties between 0.7 - 317 gph. The hose pumps have no expensive wearing components such as seals, valves, membranes, stators, rotors or glands to maintain. They are suited for handling difficult fluids -- corrosive, viscous, shear-sensitive, gaseous, crystallizing or even fluids with a combination of these properties.
Bredel Hose Pumps
Blackmer® System One® centrifugal pumps are designed for high-volume, severe-duty applications. Designed around the seal where 90% of pump failures occur, the pumps have a stiffer heavy-duty shaft and larger bearings resulting in the widest operational window off the Best Efficiency Point (BEP) than any standard process pump. This means facility operators can expect the pumps to improve mean time between failures to reduce maintenance costs.
Xylem has launched a next-generation pump controller that provides a clear view of a plant's energy consumption and the true cost of pumping operations. Unlike general purpose PLC systems, the Flygt APP 800 is specifically engineered to control water and wastewater transport systems. An embedded web server gives operators access to critical data from anywhere allowing them to monitor equipment, troubleshoot and identify trends, diagnose and resolve issues quickly, all from a remote location.
Flygt, a Xylem brand
Aerator, mixer motors
Aqua-Aerobic Systems offers high efficiency and premium efficiency Endura® Series motor options for Aqua-Jet® surface aerators and AquaDDM® direct-drive mixers. The motors are available in a variety of horsepower ratings and operate under the most severe conditions. The motors require no greasing and only limited maintenance for five years, resulting in energy savings as well as reduced maintenance costs.
FEDCO has introduced the MSB-Hemi feed pump with integrated energy recovery turbine (ERT). The package combines the MSB multi-stage centrifugal feed pump coupled with a turbine module for brine energy recovery. It can improve energy efficiency in brackish RO systems over a broad range of flows and pressures. The system handles feed flows up to 150 m3/hr and pressures up to 35 bar and brine flows up to 80 m3/hr. The turbine module uses custom-designed multi-vane turbine nozzles and impeller to achieve turbine efficiencies in excess of 80%.
Fluid Equipment Development Co.
With models available from 1 to 7 ½ hp, Zoeller Engineered Products offers one of the broadest lines of grinder pumps in the industry. Cool run design technology effectively disperses heat, promoting longer service life. The units are available with multiple discharge configurations and wet end designs. Some models feature the unique Zoeller reversing cutter design, preventing cutter jams.
Zoeller Engineered Products
Baldor Electric now offers customers in North America access to one of the most complete lines of large AC motors in the world. Baldor•Reliance® stock and custom motors are available up to 15,000 hp, while ABB induction and synchronous motors are available up to 100,000 hp. This AC motor offering includes both NEMA and IEC configurations, assuring customers they will get the motor that meets frame, enclosure and duty cycle standards for any application.
Baldor Electric Co.
Super T Series® self-priming centrifugal pumps from Gorman-Rupp offer an external shimless wearplate adjustment. This adjustment is as simple as a turn of the hand. The design results in a dramatic increase in impeller and wearplate life. The pumps offer a removable cover plate allowing for quick access to pump interiors without disconnecting piping. They are available in discharge sizes from 3" to 10" with flows up to 3,400 gpm and heads to 148 feet. Pumps 4" and larger are engineered to allow up to a 3" diameter spherical solid to pass through any critical area, including the recirculation port.
The new PSL 5.0 Pump Station Level Controller from Greyline Instruments features redundant level sensing. It includes a non-contacting ultrasonic sensor and users can also connect a loop-powered pressure sensor for redundant sensing in applications with foam or grease. The controller will recalibrate the pressure sensor automatically and switch back and forth from ultrasonic level to the pressure sensor as required. It is designed for sewage lift stations, wet wells and storage tanks. Calibration and relay set points are easy to enter through a user-friendly keypad and menu system.
Greyline Instruments Inc.
KSB now offers the Sewatec dry-installed volute casing pump. Used for wastewater transport and treatment, sludge handling, and stormwater applications, the pump features a flexible hydraulic design to meet a multitude of conditions. The Sewatec dry pump line is a derivative of the KRT line of submersible pumps (also available from KSB). Because Sewatec's impellers, bearings, mechanical seals, O-rings and discharge covers are interchangeable with the KRT line, inventory streamlining is easy for customers that also use KRT wet well pumps.
The Dean Pump® Series FW1200 Water Pump, which is NSF/ANSI Standard 50 certified, is available in both vertical or horizontal configurations. Designed specifically for water, including industrial/municipal applications, it features two pump sizes, ductile iron construction (bronze impeller), capacities to 2800 gpm, heads to 155 feet, working pressures to 125 psig, and pumping temperatures to 250 F.
Met-Global Pump Solutions - Dean Pump
The Godwin Dri-Prime NC150 is a powerful yet compact pump with flow capabilities up to 1,767 gpm and discharge heads up to 195 ft. The pump features patented Flygt N-technology with an innovative self-cleaning hydraulic. NC Series pumps are engineered to deliver sustained high efficiency resulting in lower energy and fuel costs while reducing unplanned downtime. The portable pumps are suitable for both sewage and clean water applications. The pumps feature the Dri-Prime automatic self-priming system that primes and re-primes from dry up to 28 ft. without operator assistance or foot valve control.
Xylem Dewatering Solutions
The MetroTech II controller from Metropolitan Industries is a pre-programmed water booster pump controller that maintains a constant discharge pressure by varying the speed of new or existing water booster pump(s). The controller features a color touch screen operator interface, simplifying the set up and operation of a pump system. This control strategy saves energy, reduces water hammer and provides accurate set point control even under the most demanding conditions.
Metropolitan Industries Inc.
The Moyno® Metering Pump includes enhanced pumping elements and integral VFD/Motor Controls that expand the scope of metering applications and enhance economical and efficient performance when metering low-flow liquids in a wide range of processing applications including dosing, sampling and metering. The integral VFD/motor controls also improve metering accuracy and repeatability. The pumps are available in sizes from .5 to 5 hp in 1 or 3 phase power.
Neptune™ Chemical Pump designed its 500-D Series Hydraulic Diaphragm Metering Pumps for use in injection applications. The duplex feature Eze-Clean™ valve cartridges that can be removed from the pump heads without having to disturb the pump's piping. The company's Variable Oil By-pass ™ stroke adjustment provides better valve performance than variable-linkage designs. The 500-D pump head materials of construction are 316 stainless steel, C-20, PVC, and Kynar. Material options for the ball check valves are 316 stainless body and seat with 316 balls, PVC body and seat with ceramic balls, C-20 body and seat with C20 balls, and Kynar body and seat with ceramic balls.
Neptune™ Chemical Pump
Pentair's Pentek® XE Series™ 4" submersible motors now include 40 different models, including the new Coal Bed Methane Series. The Coal Bed Methane Series motors are rated for continuous duty in 86° Fahrenheit water, and feature a silicon carbide mechanical seal and diaphragm filter to help prevent the entry of sand/debris. The water-filled motors are built for reliability in potentially contaminated well installations, including those with sand or coal fines.
Clarifier and thickener drive units provide the rotational force necessary to turn the rake arms in a circular basin. The rotating rake arms transport settled solids to the center of the tank for removal. Because drive units are applied in a wide range of industrial facilities, WesTech has developed a premium drive unit for each application. The drive units can be designed for torque requirements from 1,000 ft-lbs to 6,000,000 ft-lbs.