John Guest, an RWC brand

Atlanta, US 30318

COMPANY OVERVIEW

About John Guest, an RWC brand

Contact


Atlanta, US 30318
http://www.JohnGuest.com
770.863.4005
800.945.4872

More Info on John Guest, an RWC brand

65e74db01f04ab001e1db217 John Guest Logo On White Hoz Rgb

John Guest, an RWC brand, is a manufacturer of engineered push-fit fittings, valves and LLDPE Tubing, ranging from ¼ to ½ in. in outside diameter and 3/8 to 1 in. CTS sizes. The fittings are available in a variety of configurations for a wide range of markets, including water filtration/treatment, beverage dispensing, agricultural/hydroponics, car wash, and marine/RV markets. John Guest products are manufactured from FDA approved materials, lead-free and they are ideal for use in confined spaces. Fittings are easy to use and require no tools to make reliable leak-free connections. John Guest products are listed with NSF International Standards 14, 61, CSA standards pw and IAPMO plumbing codes.

Products and Press Releases

John Guest Ice Maker Kit
Residential/Commercial

Ice Maker/Water Supply Kit

May 4, 2021
John Guest Ice Maker/Water Supply Kits eliminate the use of a self-piercing valve. These kits are simple to use and install onto existing under-sink water supply valves in minutes...
Product Background_24
Residential/Commercial

John Guest 1/2-in. Check Valve

April 5, 2021
Produced at the request of leading companies in the drinks dispense industry, the John Guest 1/2-in. Check Valve ensures protection against reversal of flow. The low headloss ...
3_8_female_compression_thread_adapter2
Residential/Commercial

3/8” OD x 3/8” Female Compression Thread Connector

Jan. 28, 2021
The PP Range of inch-size push-fit fittings is offered for tube sizes 1/4-in. OD to 1/2-in. OD. These fittings are manufactured in white polypropylene with food grade EPDM o-rings...
3_8_male_compression_threa_adapter2
Residential/Commercial

3/8” OD x 3/8” Male Compression Thread Connector

Jan. 27, 2021
The PP Range of inch-size push-fit fittings is offered for tube sizes 1/4-in. OD to 1/2-in. OD. These fittings are manufactured in white polypropylene with food grade EPDM o-rings...

Request More Information

By clicking above, I acknowledge and agree to Endeavor Business Media’s Terms of Service and to Endeavor Business Media's use of my contact information to communicate with me about offerings by Endeavor, its brands, affiliates and/or third-party partners, consistent with Endeavor's Privacy Policy. In addition, I understand that my personal information will be shared with any sponsor(s) of the resource, so they can contact me directly about their products or services. Please refer to the privacy policies of such sponsor(s) for more details on how your information will be used by them. You may unsubscribe at any time.