NEW LITERATURE

Oct. 1, 2006
A 16-page, full-color brochure from ABB sets forth the company’s portfolio of instrumentation for the water and wastewater industries.

Instrumentation

Click here to enlarge image

A 16-page, full-color brochure from ABB sets forth the company’s portfolio of instrumentation for the water and wastewater industries. The brochure begins with basic information on the company’s heritage in the industries, and explains that its products inter-operate and communicate using the same standard within a single digital architecture.

ABB Instrumentation
Warminster, PA Web: www.abb.us/instrumentation

Compressed air systems

Click here to enlarge image

Kaeser Compressors has published a compressed air system guide: “Cost Savings with Compressed Air System Maintenance.” This step-by-step guide is a helpful resource for any facility that uses compressed air. This full color, eight page reference manual outlines maintenance activities for each component in the system including: compressors, dryers, filters, drains, and aftercoolers.

Kaeser Compressors Inc.
Tel: 800-777-7873 Web: www.kaeser.com

Lining selection criteria

Click here to enlarge image

According to an independent survey of wastewater engineers, municipal managers and contractors, a chemical-resistant lining’s permeability to corrosive substances was shown to be the most important consideration during product selection. Survey sponsor, Sauereisen, has published a summary of findings. The most prominent statistics: Approximately 70 percent of respondents said permeability to corrosive substances is the most critical factor for chemically resistant linings and more than 64 percent said permeability is the most commonly overlooked aspect of corrosion-resistant lining selection.

Sauereisen
Pittsburgh, PA
Tel: 412-963-0303
Web: www.sauereisen.com

Ultrasonic flowmeter

Click here to enlarge image

Krohne offers a datasheet, available for download on its website, on the new Optisonic 6300 clamp-on ultrasonic flowmeter, designed for installation in heavy industrial and hazardous environments. The meter offers performance capabilities that exceed even those of the UFM600 T model, featuring improved measurement accuracy, ATEX Approval, an extended temperature range and the ability to handle smaller line sizes. The flowmeter also includes numerous features to aid installation and enhance product operations.

Krohne Inc.

Ultrasonic flowmeter

Krohne offers a datasheet, available for download on its website, on the new Optisonic 6300 clamp-on ultrasonic flowmeter, designed for installation in heavy industrial and hazardous environments. The meter offers performance capabilities that exceed even those of the UFM600 T model, featuring improved measurement accuracy, ATEX Approval, an extended temperature range and the ability to handle smaller line sizes. The flowmeter also includes numerous features to aid installation and enhance product operations.

Krohne Inc.
Tel: 978-535-6060
Web: www.krohne.com/northamerica

Monitoring systems

A new 16-page catalog from Sensaphone® offers the latest information on its product line and accessories, including the recently introduced Sensaphone 1400 and 1800 remote monitors and alarm notification systems. The catalog offers details on the company’s total inputs and outputs, notification capabilities, as well as built-in and special features. Also included is an article that offers expert advice on selecting the best monitor for specific applications. The company’s remote systems monitor environmental conditions such as temperature, power, humidity, or water on the floor.

Sensaphone
Aston, PA
Tel: 877-373-2700
Web: www.sensaphone.com

Automation products

Rockwell Automation has published a new Allen-Bradley Essential Components Catalog and toll-free number. The catalog contains the most frequently ordered components, such as terminal blocks, I/O systems and operator interface devices. To order Allen-Bradley component-class products, customers can use the new product catalog, the Rockwell Automation online resource center at www.rockwellautomation.com/components, and a new toll-free number that will connect the customer with a local Allen-Bradley distributor, technical support or ordering.

Rockwell Automation Inc.

Chromatography information

Thermo Electron has developed a new web-based Chromatography Resource Center, to provide the necessary tools and technical advice to help chromatographers overcome their separation challenges and improve their analytical results. This all-inclusive, comprehensive resource focuses on HPLC, GC and SPE consumables. The center is on-line at www.thermo.com/columns.

Thermo Electron Corp.
Madison, WI
Tel: 800-532-4752

Mass flow meter

Click here to enlarge image

With a “U” tube flow sensor design, the new Model CMU Coriolis Mass Flow Meter from Fluid Components International now delivers more than twice the industry standard flow rate than previously available. A brochure is available on the company’s website. Designed for line sizes from 0.25"to 12", the meter measures flow rates from 2.2 to 80,800 lb/hr. It provides true mass flow measurement while at the same time measuring fluid temperature, density and volumetric flow.

Fluid Components International
San Marcos, CA
Tel: 800-854-1993
Web: www.fluidcomponents.com

Fabric buildings

Summit Structures, a provider of design-build fabric buildings, has a new website. The site was designed to simplify navigation, quickly bringing the user to customer applications in the Industry section, technical information in the Products section, a broad range of customer specific projects in the Project Showcase, and an explanation of the company’s Design Build services.

Summit Structures
Allentown, PA
Tel: 800-615-4777
Web: www.summitstructures.com

Soil-cement guide

“Soil-Cement Guide for Water Resources,” a new publication from the Portland Cement Association, is a comprehensive engineering guide covering applications, material selection, laboratory testing, mixture proportioning, and other quality control and construction topics. Numerous projects provide examples of the various aspects of soil-cement design and construction.

Portland Cement Association
Skokie, IL
Tel: 800-868- 6733
Web: www.cement.org

Butterfly valves

Click here to enlarge image

Danfoss Flomatic has introduced a new four-color condensed catalog covering its AzureTM Model 45 AWWA Flanged Butterfly valves. The new ductile iron flanged valves compliment the company’s Sylax® series lug and wafer style butterfly valves. The valves are designed to ANSI/AWWA C504 Butterfly valve standards and are available in a size range from 3" thru 30."

Danfoss Flomatic Corp.
Glens Falls, NY
Tel: 800-833-2040
Web: www.flomatic.com

Flow monitors

Universal Flow Monitors’ website now provides a chart to help visitors select the appropriate flowmeter technology for the type of fluid they are using. The chart also compares various technologies and fluids on the basis of cost, accuracy, installation requirements, output type, on-unit display availability, power requirements, flow switching availability, rangeability, fluid conductivity and response time.

Universal Flow Monitors Inc.
Hazel Park, MI
Tel: 248-542-9635
Web: www.flowmeters.com

Sponsored Recommendations

ArmorBlock 5000: Boost Automation Efficiency

April 25, 2024
Discover the transformative benefits of leveraging a scalable On-Machine I/O to improve flexibility, enhance reliability and streamline operations.

Rising Cyber Threats and the Impact on Risk and Resiliency Operations

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...

State of Smart Manufacturing Report Series

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...

SmartSights WIN-911 Alarm Notification Software Enables Faster Response

March 15, 2024
Alarm notification software enables faster response for customers, keeping production on track