Submersible pumps help solve decades-old stormwater problem in city of Pasadena

Nov. 17, 2014
Recently, officials of the city of Pasadena, Texas, along with the Texas Department of Transportation turned to Grundfos and its line of Axial-Flow Submersible Pumps to solve a major flooding issue that had plagued the city for years.

PASADENA, TEXAS, Nov. 17, 2014 -- Recently, officials of the city of Pasadena, Texas, along with the Texas Department of Transportation (TDOT) turned to Grundfos, a Denmark-based pump manufacturer, and its line of Axial-Flow Submersible Pumps to solve a major flooding issue that had plagued the city for years.

During significant rainstorms, Pasadena receives excessive water flow that quickly overwhelms its pumping stations. Most alarmingly, ample flow can cause blockage that affects hurricane evacuation routes. Because of this, the city's main priority during major storms is to keep the routes clear and passable.

Beltway 8 is one of the few main highways used to evacuate residents from the south and southwest during a hurricane. For decades, the Spencer Road exit has suffered from surface water flooding. On several occasions, the designated evacuation route was left impassable. In cooperation with TDOT, Pasadena was able to determine that the cause of the flooding was insufficient capacity of the storm drain system. In these systems, flap gates are installed at or near drain outlets to prevent the drainage system from back flooding during major storms.

In the case of Beltway 8, the road's 54-inch storm sewer lacked proper capacity, so a flap gate valve would prevent additional water from flowing back on the road. Problematically, however, that same safety valve would also limit flow into the drain, causing frequent flooding to the roadway that would result in lane closures and extended traffic delays.

Pasadena had two options. It could either create a large detention basin or it could increase the capacity of the storm system. Both options required several million dollars, as well as the allocation of real estate and years of construction.

"The particular application of this stormwater pump system was unique in that it was placed between the Texas Department of Transportation feeder roads and the Harris County Toll Road Authority main lanes in a footprint that most engineers would consider daunting," said Mark Gardemal, assistant director of Public Works for Pasadena. "We had about 25 feet to work, and we were going to have to do all our pumping and piping arrangements below ground."

Because of restrictions on space, project engineers reconsidered their initial two options. Instead, they decided to route excess stormwater around the existing sewer and push it far enough downstream to create adequate capacity.

"We recommended the Grundfos submersible pumps along with the CU362 and the variable frequency drive," said Cory Marcotte, engineering sales professional at distributor Pumps of Houston. "It allows us not only to maintain high efficiencies during operation but also to monitor and adjust the speed of the pump depending on how much rainfall we get at a particular time."

The energy-efficient line is capable of pumping up to 150,000 gallons per minute and features a compact design, as well as construction cost savings of up to 50 percent. The Grundfos stormwater pumping station offered project planners a compact, energy-efficient and cost-saving solution, which for Pasadena, saved significant operation and maintenance costs when compared to similar options.

Since the city installed the pumps in 2012, the area experienced a major storm that generated 6 inches of rain. Amid fears of flooding, the new pumping station efficiently moved more than 30,000 gallons of flood water per minute for roughly five hours -- keeping the highway clear and safe.

See also:

"Grundfos announces release of new commercial, industrial pumps"

"Grundfos Pumps celebrates 40th anniversary"


About Grundfos

With an annual production of more than 16 million pumps, Grundfos is a specialist in advanced pump solutions and a trendsetter in water technology, specializing in circulator pumps for heating and air conditioning as well as centrifugal pumps for industrial applications, fire protection, water supply, wastewater and water treatment. In addition to pumps, Grundfos produces standard and submersible motors as well as state-of-the-art electronics for monitoring and controlling pumps. For more information, visit us.grundfos.com.

###

Sponsored Recommendations

ArmorBlock 5000: Boost Automation Efficiency

April 25, 2024
Discover the transformative benefits of leveraging a scalable On-Machine I/O to improve flexibility, enhance reliability and streamline operations.

Rising Cyber Threats and the Impact on Risk and Resiliency Operations

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...

State of Smart Manufacturing Report Series

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...

SmartSights WIN-911 Alarm Notification Software Enables Faster Response

March 15, 2024
Alarm notification software enables faster response for customers, keeping production on track