Insituform wins $7.7M sewer rehabilitation contract in Hartford, CT

June 4, 2009
June 3, 2009 -- Insituform Technologies Inc. has been awarded an additional $7.7 million sewer contract from the Metropolitan District Commission (MDC) in Hartford, CT...

June 3, 2009 -- Insituform Technologies Inc. has been awarded an additional $7.7 million sewer contract from the Metropolitan District Commission (MDC) in Hartford, Connecticut for the rehabilitation of over 200,000 linear feet of 6- to 30-inch sewer lines using Insituform ® cured-in-place pipe (CIPP). This award is in addition to the $10.3 million contract MDC signed with Insituform last November.

Crews will install Insituform® CIPP using the air inversion steam cure (AISC) method, which uses air to invert the CIPP tube and then steam to cure the resin. Using the AISC method can reduce the amount of water used during installation by nearly 95 percent. The project is expected to begin in June 2009 and be completed by December 2010.

"We are pleased to continue our relationship with MDC with this additional project. Our experienced crews and management team are dedicated to exceeding MDC's expectations on every project," said Jim Newkirk, General Manager for Insituform's East Region.

Insituform ® CIPP is a jointless pipe-within-a-pipe used to rehabilitate pipes ranging in diameter from 6 to 96 inches. Suitable for repair of sanitary sewers, storm sewers and force mains, Insituform® CIPP extends the life of existing infrastructure by approximately 100 years. Rehabilitating sewer pipelines with Insituform® CIPP reduces infiltration, restores structural integrity and increases flow capacity without disruption to communities, typically at a lower cost than dig and replace solutions.

Insituform Technologies Inc. is a leading worldwide provider of proprietary technologies and services for rehabilitating sewer, water, energy and mining piping systems and the corrosion protection of industrial pipelines.

###

Sponsored Recommendations

ArmorBlock 5000: Boost Automation Efficiency

April 25, 2024
Discover the transformative benefits of leveraging a scalable On-Machine I/O to improve flexibility, enhance reliability and streamline operations.

Rising Cyber Threats and the Impact on Risk and Resiliency Operations

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...

State of Smart Manufacturing Report Series

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...

SmartSights WIN-911 Alarm Notification Software Enables Faster Response

March 15, 2024
Alarm notification software enables faster response for customers, keeping production on track