Products & Services: Odor/Corrosion Control

April 1, 2018
Collection of odor and corrosion control-related equipment, products and services.

Tank, lagoon covers for odor control

Control foul odors at wastewater treatment plants by securely covering tanks with a gastight cover from Geomembrane Technologies™, an Evoqua brand. Customizable covers offer long-lasting odor control and can be installed worldwide without disrupting plant operation. The covers reliably capture odorous gases while still providing easy access for inspection and maintenance. Designed to fit tanks, basins, and lagoons of any shape or size to meet a plant's unique needs.

Geomembrane Technologies™, an Evoqua brand

www.evoqua.com/en/brands/geomembrane-technologies

Circle No. 212 on Reader Service Card

Biological odor control

The IMS I-BOx® Series odor control system from Integrity Municipal Systems is an advanced two-stage biological system that provides point source odor control. The first stage is a biological reactor where bacteria are used to oxidize hydrogen sulfide (H2S), removing 99% of H2S and organic sulfur compounds. The second stage uses activated carbon to remove residual H2S and organic odors. Standard models are available to treat up to 5,000 cfm (8500 m3/h) of odorous air.

Integrity Municipal Systems

www.integritymunicipalsystems.com

Circle No. 213 on Reader Service Card

Natural odor control

Ecosorb® products use natural ingredients to eliminate industrial smells without the need for harsh chemicals or masking fragrances. When diluted with water and broadcast via atomization, the tiny water droplets created contain a thin oil skin that creates an electrostatic charge. This charge facilitates adsorption of the malodor molecules onto the droplet surface. The gas is absorbed by the droplet (solubility) and held. Available in a variety of formulas, including atomization, spray gel, vaporization, and additive.

OMI Industries

http://odormanagement.com

Circle No. 214 on Reader Service Card

Oxygen treatment

Praxair's In-Situ Oxygenation (I-SO™) System is a mechanical oxygenator that can dissolve as much as 82% of the high-purity oxygen into water, eliminating foul odors. Increase bio-treatment capacity, significantly lower VOC emissions, reduce foam formation, reduce electrical power usage, and allow for greater variations in oxygen demand.

Praxair

www.praxair.com

Circle No. 215 on Reader Service Card

Polyaspartic coatings

PPG's KWIKSPAR® 600 and Kwikspar 600 SG polyaspartic coatings are a line of corrosion-resistant, direct-to-­metal (DTM) coatings formulated with advanced film-build and fast-cure characteristics to improve throughput in field and shop applications. In highly corrosive environments, Kwikspar 600 (full-gloss) and Kwikspar 600 SG (semi-gloss) coatings can be overcoated on AMERCOAT® 370 or SIGMAFAST® 278 epoxy primers to provide an ultra-fast-drying alternative to traditional three-coat corrosion protection systems. In low-to-moderately corrosive environments, one coat of Kwikspar 600 or Kwikspar 600 SG can replace traditional two-coat epoxy/urethane systems.

PPG Protective and Marine Coatings

www.ppgpmc.com

Circle No. 216 on Reader Service Card

Custom tank covers

Defender™ Tank Covers are custom manufactured from industrial-grade materials to fit the profile of your new or existing wastewater treatment tank or potable water tanks. Odorous gas emissions from wastewater treatment facilities generate complaints from local residents and are subject to the Clean Air Act Amendments of 1990. Defender™ odor control covers contain volatile organic compounds at their source. Low profile, structurally supported covers minimize emission treatment volume to reduce the cost of air filtration equipment. Eliminate the ongoing expense of applying costly odor control chemicals through atomizers and misters.

Environetics Inc.

www.environeticsinc.com

Circle No. 217 on Reader Service Card