Products & Services: Pumps and Systems

May 1, 2018
Collection of pumps and systems-related equipment, products and services.

Tube failure detection technology

Blue-White’s new TFD+ (Tube Failure Detection) is now built into every FLEXFLO® Polymer Pump at no additional cost. This breakthrough technology is designed to detect the presence of oil- and water-based polymers in the pump head, which would indicate tube failure. When the TFD+ senses tube failure the pump automatically shuts off and will energize a relay, permitting communications with external equipment, such as a backup pump, an alarm or a SCADA system. There is no false triggering caused by condensation or washdown procedures. The pump will not resume operation until the problem is resolved.

Blue-White® Industries

Circle No. 249 on Reader Service Card

New sizes for FSIP progressive cavity pumps

NETZSCH Pumps North America has added to its line of full service-in-place (FSIP) NEMO® progressive cavity pumps. Ideal for wear-intensive applications, the maintenance-friendly FSIP™ design has been re-­engineered to provide full access to all the pumps’ rotating parts. NEMO FSIP is now available in six sizes (NM045 to NM105) for flow rates up to 700 gallons per minute (gpm). Now offered with differential pressures up to 90 pounds per square inch (psi; 1-stage) up to 180 psi (2-stage). S, L, D and P geometries are now available. All wearing parts — from flange to flange — can easily be replaced when opening the pump.

NETZSCH Pumps & Systems

Circle No. 250 on Reader Service Card

Laboratory pumps

Tacmina Corporation recently announced the addition of two new Smoothflow Q Series Pumps for laboratory use. The pumps are small and light enough to be held in the palm of a hand, but powerful enough to provide discharge pressure up to 2.0 MPa and precise enough to configure flow rates at units of 0.01 mL/min. Smoothflow Q Series pumps provide a constant and stable flow, they are gentle on liquids, economical to operate, and laboratory-sized. The pump design allows for constant flow without pulsation, liquid leakage or changes in properties.


Circle No. 251 on Reader Service Card

Rotary lobe pump

The Boerger BLUEline is a self-priming, valveless, positive displacement rotary lobe pump used for the conveyance of viscous and abrasive materials. Features include pulsation-free operation, fully reversible rotation, dry run capabilities and flow rates up to 7,500 gpm. The BLUEline pumps are stable and wear-resistant with MIP-Design (Maintenance in Place). Applications include sludge (primary, WAS, RAS, digested, thickened, etc.), biosolids, grease, sewage, scum, lime slurry, alum sludge, permeate, polymers, etc.


Circle No. 252 on Reader Service Card

Intelligent pump controller

The Aquavar® Intelligent Pump Controller from CentriPro (Goulds Water Technology) is designed specifically by hydraulic engineers with advanced pump protection features for precise control of speed, pressure, flow and level over a wide range of submersible and aboveground applications. It also features the Quick-start Genie for fast and simplified programming, removable graphical keypad with backlit display, simplifying the interface, and multi-pump operation for up to four pumps without a PLC.

Goulds Water Technology, a Xylem Brand

Circle No 253 on Reader Service Card

Multistage pumps

Wilo USA has extended the range of the Wilo Helix V high-efficiency multistage pump line. The Helix V is a non-self-priming, high-pressure, vertical multistage centrifugal pump with inline connections and is suitable for a wide range of applications including water supply and pressure boosting, industrial circulation systems, washing systems and irrigation. The pump is available immediately in 6” and 8” and boasts full 304 stainless-steel construction, a premium efficient NEMA motor, cartridge seal for easy replacement and repair, and improved hydraulic performance.


Circle No. 254 on Reader Service Card

Continue Reading