Aluminum deflection elbows

July 13, 2016
The cast aluminum line of Smart Elbow® deflection elbows from HammerTek® is now offered in tube and pipe sizes from 1.5 inches to 12 inches in diameter.

The cast aluminum line of Smart Elbow® deflection elbows from HammerTek® is now offered in tube and pipe sizes from 1.5 inches to 12 inches in diameter. Engineered for dilute-phase and dense-phase pneumatic conveying of lime, powdered activated carbon, diatomaceous earth and other abrasive materials utilized in wastewater treatment, the deflection elbow prevents material from impacting the elbow wall and causing wear, failure and downtime. The elbows feature a spherical chamber that protrudes partially beyond the desired 90° or 45° pathway, which causes a ball of material suspended in air to rotate, gently deflecting incoming material around the bend without impacting the elbow wall or generating heat.

HammerTek Corp

www.hammertek.com

Photo 53848212 © Wavebreakmedia Ltd | Dreamstime.com
Dreamstime Xxl 53848212
Photo courtesy University of California Riverside.
1280 960 Cut#2

Most Read

Sponsored