Scottish Water's £30M water distribution project to improve services for more than 54,000 people

May 10, 2019
Utility changing the source of their water supply from Burncrooks Water Treatment Works (WTW) in west Stirlingshire to Milngavie WTW in East Dunbartonshire.

SCOTLAND, MAY 10, 2019 -- Scottish Water is to improve services to more than 54,000 people in parts of the Bearsden, Milngavie, Clydebank and Strathblane areas.

The utility will do so by changing the source of their water supply from Burncrooks Water Treatment Works (WTW) in west Stirlingshire to Milngavie WTW in East Dunbartonshire.

A £30 million project will involve the installation of about 8 miles (13km) of new water main, the transfer of supply from Burncrooks WTW to Milngavie WTW and the decommissioning of Burncrooks WTW.

Burncrooks WTW in the Kilpatrick Hills near Strathblane, which was built in the late 1950s, has served the area well but is reaching the end of its working life and is not suitable in the long-term to meet stringent water quality standards.

Milngavie WTW, which was opened in 2007, is a state-of-the art WTW which already serves about 700,0000 across much of the Greater Glasgow area.

The investment in Scottish Water's infrastructure will ensure customers in the north of Bearsden, parts of the west of Milngavie on higher elevations such as Mains Estate, Barloch, and Clober, parts of Strathblane and Blanefield, Faifley, and a large part of Clydebank (apart from areas such as Kilbowie, Whitecrook and Mountblow which are already served from Milngavie and Blairlinnans WTWs), receive the highest quality drinking water for many years to come.

The investment will also enable Scottish Water to supply customers with water from more than one WTW, Milngavie or Balmore WTW near Torrance, and that increased connectivity will provide improved resilience and reduce the risk of disruption to normal water supplies.

The main 4.3 miles (7km) section of new plastic twin-pipe water main, which will be 560 milimetres in diameter, will be installed from Bankell Service Reservoir in the east (near Strathblane Road, A81) to Baljaffray Service Reservoir in the west, following a route up part of Strathblane Road, west along the north of Craigmaddie Reservoir, round the north and west of Mugdock Reservoir, down Mugdock Road to Drumclog Car Park.

It will continue across the south of Mugdock Country Park following existing footpaths, crossing the West Highland Way near a footbridge over the Allander Water near the industrial estate (Clober), crossing the A809 just south of Craigton village, north west of Mains Plantation to Baljaffray Service Reservoir.

The total of 8 miles of water main will also include a second stretch of 3.5 miles (or 6km) of 250ml pipe to be installed from near Baljaffray to Carbeth, where it will connect to the existing network.

This new main, which will also be plastic, will replace an existing stretch of old 21-inch main which has a history of bursts. So, in addition to connecting customers to the Milngavie WTW network, this new main will provide improved security of supply.

Sponsored Recommendations

SmartSights WIN-911 Alarm Notification Software Enables Faster Response

March 15, 2024
Alarm notification software enables faster response for customers, keeping production on track

Automated Fresh Water Treatment

March 15, 2024
SCADA, Automation and Control for Efficient and Compliant Operations

Digital Transformation Enables Smart Water

March 15, 2024
During this webinar we will discuss factors driving the transformation to digital water, water industry trends, followed by a summary of solutions (products & services) available...

Smart Water Solutions: Transforming the Water Universe

March 15, 2024
Water is our most valuable resource, and efficient and effective water and wastewater handling is crucial for municipalities. As industry experts, you face a number of challenges...