EPA seeks comment on proposed guidelines to control construction site pollution

Nov. 21, 2008
EPA is seeking comments on its proposed guidelines to control the discharge of pollutants from construction sites. The proposal would require all construction sites to implement erosion and sediment control best management practices to reduce pollutants in stormwater discharges...

WASHINGTON, DC, Nov. 19, 2008 -- EPA is seeking comments on its proposed guidelines to control the discharge of pollutants from construction sites. The proposal would require all construction sites to implement erosion and sediment control best management practices to reduce pollutants in stormwater discharges.

"This proposal builds a foundation for cleaner streams and greener neighborhoods through improved treatment technologies and prevention practices," said Benjamin H. Grumbles, EPA's assistant administrator for water.

In addition, for certain large sites located in areas of the country with high rainfall intensity and soils with a high clay content, stormwater discharges from the construction site would be required to meet a numeric limit on the allowable level of turbidity, which is a measure of sediment in the water. In order to meet the proposed numeric turbidity limit, many sites would need to treat and filter their stormwater discharges.

Construction activities such as clearing, excavating and grading significantly disturb the land. The disturbed soil, if not managed properly, can easily be washed off the construction site during storms and enter streams, lakes, and other waters. Stormwater discharges from construction activities can cause an array of physical, chemical and biological impacts.

Sediment is one of the leading causes of water quality impairment nationwide, including reducing water depth in small streams, lakes and reservoirs.

>> More information on the proposal

###

Sponsored Recommendations

ArmorBlock 5000: Boost Automation Efficiency

April 25, 2024
Discover the transformative benefits of leveraging a scalable On-Machine I/O to improve flexibility, enhance reliability and streamline operations.

Rising Cyber Threats and the Impact on Risk and Resiliency Operations

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...

State of Smart Manufacturing Report Series

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...

SmartSights WIN-911 Alarm Notification Software Enables Faster Response

March 15, 2024
Alarm notification software enables faster response for customers, keeping production on track