The GridBee GS-12 family of electric mixers for potable water storage tanks now includes models with 120-volt and 240-volt motors. The mixers rest on the floor of a potable water storage tank to circulate water to evenly distribute disinfectant and kill bacteria.
The GridBee GS-12 family of electric mixers for potable water storage tanks now includes models with 120-volt and 240-volt motors. The mixers rest on the floor of a potable water storage tank to circulate water to evenly distribute disinfectant and kill bacteria.
GridBee GS-12 mixers can be installed through a 12-inch diameter or larger hatch. The mixer's low-impact feet and end caps will not damage tank coatings during installation or operation. According to the manufacturer, there is no need to enter or drain the tank for installation and no need to place the mixer in the center of the tank; installation directly below the hatch will still mix the entire tank.
The GS-12 mixers are compatible with GridBee and SolarBee Chlorine Boost and THM Removal Systems to ensure optimal water quality and to meet the EPA Stage 2 Disinfection Byproducts Rule. SCADA outputs are also available.
The GS-12 mixer measures 36 inches (92 cm) long, 11.5 inches (30 cm) in diameter and weighs 70 pounds (32 kg). Both the 120-volt and the original low-voltage 48-volt models require a 15-amp electric service.
The 48-volt model includes a ground-mounted voltage converter and control box. In addition, the GridBee GS-12 mixer family includes models with a 240-volt, 60-Hz motor and a 240-volt, 50-Hz motor.
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...
