Show Preview: WEFTEC.09

Sept. 1, 2009

Orlando, Florida, USA, hosts WEFTEC®.09 – the annual conference and exhibition of the Water Environment Federation – October 10-14. The largest U.S. event for water and wastewater professionals will include 94 technical sessions, 25 workshops and eight facility tours. Over 900 exhibiting companies will showcase a comprehensive array of the latest and best technologies. For more, see: www.weftec.org

Wastewater processing

Among innovations, Parkson – a unit of Axel Johnson Inc. – will highlight at WEFTEC are the Rotomesh Screen (a 0.5-to-1-mm screen used to protect membranes), DynaLift™ MBR (an innovative, operator-friendly, out-of-basin membrane bioreactor), Zickert Superscraper® (a highly efficient, low O&M cost sludge scraper), redesigned HiOX® Panel (a high efficiency fine bubble diffuser) and Thermo-System™ (a popular solar drying system). Models of typical plants as well full-sized systems will be on display.

Parkson Corp., Fort Lauderdale, Florida, USA, www.parkson.com

Innovative water solutions

At the core of the Government of Israel booth at WEFTEC.09 are several companies sponsored through Israel NEWTech, a national program promoting the Israeli water technology sector. Among these are AquaSpark Ltd., AGM Communication & Control Ltd., GES - Global Environmental Solutions Ltd., Lesico Ltd. and Odis Filtering Ltd. AquaSpark is an Israeli startup focusing on industrial boiler water treatment. AGM focuses on distributed control networking for DCS & SCADA applications. Started in 1996 and active also in the USA and Central America, Puritec-GES is a part of Global Environmental Solutions. A civil engineering specialist, Lesico's Lesico CleanTech subsidiary was among 50 companies recognized in 2009 by the Artemis Project as global innovators in water technology for its ZLD water reuse solution. And Odis has 25+ years in design, manufacture, installation and commissioning of water and wastewater treatment plants for municipal, industrial or emergency relief purposes.

Israel NEWTech, Government of Israel Economic Office, Tel Aviv, Israel,

www.israelnewtech.gov.il
www.aquaspark.co.il
www.agm.co.il
www.puritec-ges.com
www.lesico.com
www.odisfiltering.com
WEFTEC.09 Booth 1423

Membrane product showcase
Toray will showcase its complete line of membrane products and engineering support for package plant designs incorporating the Toray RO, Hollow Fiber MF/UF and Flat Sheet MBR membrane modules at WEFTEC. Pre-engineered package plants and systems are an ideal solution as a decentralized treatment system for their quick and easy onsite installation, commissioning, operation and remote monitoring. With containerized design for plug-and-play installation, several plant configurations are available for different daily capacities from 25-to-1,000 m³/d.

Toray Industries Inc., Chiba, Japan, www.toraywater.com
WEFTEC.09 Booth 4909

Grit removal system
The new Smith & Loveless PISTA® 360™ grit removal system with a patented V-Force™ Baffle, which also serves as a water level control device, provides practical engineering benefits during system design and cost-saving considerations for municipalities before and after installation. The design increases velocity during low flow periods while maintaining consistent grit capture during surges. Its baffle uniquely positioned within a 360°, flat-floor grit chamber, creates a forced vortex for efficiently capturing grit at all flows. Its ability to handle significant variances between design and peak flow conditions (in single units) can eliminate need for multiple grit chamber arrangements, which in turn, lowers initial capital and long-term operational costs.

Smith & Loveless Inc., Lenexa, Kansas, USA, www.smithandloveless.com
WEFTEC.09 Booth 4075

New ultrafiltration module

inge's new dizzer® 5000plus MB 1.5 module is based on its Multibore® ultrafiltration (UF) technology, making its membrane extremely resistant to mechanical and chemical agents. The module's capillary diameter has been enlarged to 1.5mm from the 0.9mm of standard modules. Applicable to drinking water and industrial water applications, it's particularly suited for highly concentrated backwash water from UF facilities or sand filters. Customers benefit from good membrane stability, which is especially important for difficult water, and balance between membrane surface and module volume that doesn't sacrifice backwash capabilities.

inge watertechnologies AG, Greifenberg, Germany, www.inge.ag
WEFTEC.09 Booth 2451, DVGW Hall 3 Booth A9/5 and IDA World Congress Booth 103/104

Rotary Cutters for Large Diameter Pipe

Rotary™ cutters cold cut large diameter steel, most stainless steel, ductile, and cost iron pipe in close quarters. The low profile design of the LCRC models needs only 4" clearance for up to 16" pipe diameter. to improve use in awkward locations, Reed offers the BAHANDLE angled handle option (shown below) that allows the user to turn the LCRC cutter from the side of a ditch, rather than having to turn the cutter from the top.

Reed Manufacturing Company
P.O. Box 1321
Erie, PA 16512
Tel:800.666.3691 or 814.452.3691
Fax: 800.456.1697 or 814.455.1697

Web: www.reedmfgco.com

More Water & WasteWater International Issue Articles
More Water & WasteWater International Archived Issue Articles

Sponsored Recommendations

April 25, 2024
Discover the transformative benefits of leveraging a scalable On-Machine I/O to improve flexibility, enhance reliability and streamline operations.
April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...
April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...
March 15, 2024
Alarm notification software enables faster response for customers, keeping production on track