Product Showcase
Solids handling
Zoeller Engineered Products’ solids handling line fits the industry’s need for higher horsepower pumps. The 4” models will provide a moderate flow when pumping against a high head while the 6” pump is ideal for a high flow requirement where a low head exists. The new 64 HD series pumps provide long service life with minimal downtime. The motor is optimally designed with oil-filled housings and non-overloading windings, which enable it to maintain a low operating temperature when facing the harshest of conditions.
Zoeller
Telemetry system
Monitor high- or low-level conditions using the new STS Edge Telemetry System with alarm notification capabilities. The STS Edge sends water level, temperature and conductivity data from remote Solinst dataloggers to your home station computer. It connects up to four dataloggers, including the Levelogger Series and AquaVent. Two-way communication allows you to remotely send changes to the STS Edge data collection and reporting schedule.
Solinst Canada Ltd.
Liquid level measurement
VEGAPULS 64 accurately detects the liquid level, even in applications with high condensation. The antenna system is encapsulated in PTFE or PEEK, so there are no cavities or crevices in which product can accumulate. The surface of the material is very finely processed with diamond tools, which also considerably reduces product adhesion. In addition, special software algorithms filter out interference caused by buildup on the antenna system. Thanks to the high dynamic range of the sensor, signal attenuation caused by product deposits is largely compensated. This allows the level to be reliably detected even with contamination on the sensor.
Vega
Ultrasonic sensor
The Greyline DFM 5.1 is designed for “difficult liquids” that would damage regular flow meters such as wastewater, slurries, sludge, chemicals, viscous liquids and abrasives. There is no obstruction to flow and no pressure drop because the device measures flow from outside a pipe. The non-intrusive, clamp-on ultrasonic sensor fits any pipe 1/2” (12.5 mm) inside diameter or larger. The electronics/display enclosure can be mounted nearby. The DFM 5.1 includes a new digital signal processor to filter background noise and interference, and to measure flow rates accurately in liquids containing gas bubbles or solids particles.
Greyline Instruments
Service-in-place progressive cavity pump
NETZSCH Pumps North America has added to its line of FSIP (full service-in-place) NEMO® progressive cavity pumps. Ideal for wear-intensive applications, the FSIP™ design has been re-engineered to provide full access to all the pumps’ rotating parts. Users can open the in-service pump housing, dismantle all rotating parts, and install them again without having to remove the pump from the pipe assembly or having to disconnect wiring. The NEMO’s rotor-stator unit can be lifted out after opening the newly designed inspection cover on the pump housing without the need for any special tools.
NETZSCH Pumps & Systems
Measurement and control center
The DEPOLOX® 700 M analyzer is designed for measurement and limited control tasks in the drinking and process water industry. The analyzer can incorporate up to six well-proven measurement parameters: free chlorine, total chlorine, pH, oxidation reduction potential, conductivity and temperature. The device uses a 7” color touch panel for an intuitive user interface and an LED lit flow cell that can be programmed to change color in case of an alarm condition.
Wallace and Tiernan, an Evoqua Company